BOL: Related items

medaka: Sequence correction provided by ONT Research

BioStar — Mon, 18 May 2020 16:28:00 -0500

medaka is a tool to create a consensus sequence from nanopore sequencing data. This task is performed using neural networks applied from a pileup of individual sequencing reads against a draft assembly. It outperforms graph-based methods operating on basecalled data, and can be competitive with state-of-the-art signal-based methods, whilst being much faster.

Address of the bookmark: https://github.com/nanoporetech/medaka

LAMSA: fast split read alignment with long approximate matches

Jit — Tue, 15 May 2018 04:44:42 -0500

LAMSA (Long Approximate Matches-based Split Aligner) is a novel split alignment approach with faster speed and good ability of handling SV events. It is well-suited to align long reads (over thousands of base-pairs). LAMSA takes takes the advantage of the rareness of SVs to implement a specifically designed two-step strategy. That is, LAMSA initially splits the read into relatively long fragments and co-linearly align them to solve the small variations or sequencing errors, and mitigate the effect of repeats. The alignments of the fragments are then used for implementing a sparse dynamic programming (SDP)-based split alignment approach to handle the large or non-co-linear variants. We benchmarked LAMSA with simulated and real datasets having various read lengths and sequencing error rates, the results demonstrate that it is substantially faster than the state-of-the-art long read aligners; mean-while, it also has good ability to handle various categories of SVs. LAMSA is open source and free for non-commercial use. LAMSA is mainly designed by Bo Liu & Yan Gao and developed by Yan Gao in Center for Bioinformatics, Harbin Institute of Technology, China.

Address of the bookmark: https://github.com/hitbc/LAMSA

SALSA: A tool to scaffold long read assemblies with Hi-C

Jit — Fri, 15 Jun 2018 04:01:15 -0500

This code is used to scaffold your assemblies using Hi-C data. This version implements some improvements in the original SALSA algorithm. If you want to use the old version, it can be found in the old_salsa branch. To use the latest version, first run the following commands: cd SALSA make To run the code, you will need Python 2.7, BOOST libraries and Networkx(version lower than 1.2). If you consider using this tool, please cite our publication which describes the methods used for scaffolding. Ghurye, J., Pop, M., Koren, S., Bickhart, D., & Chin, C. S. (2017). Scaffolding of long read assemblies using long range contact information. BMC genomics, 18(1), 527. Link Ghurye, J., Rhie, A., Walenz, B.P., Schmitt, A., Selvaraj, S., Pop, M., Phillippy, A.M. and Koren, S., 2018. Integrating Hi-C links with assembly graphs for chromosome-scale assembly. bioRxiv, p.261149 Link For any queries, please either ask on github issue page or send an email to Jay Ghurye (jayg@cs.umd.edu).

Address of the bookmark: https://github.com/machinegun/SALSA

DBG2OLC:Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies

Jit — Wed, 19 Apr 2017 10:09:51 -0500

DBG2OLC:Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies

Our work is published in Scientific Reports:

Ye, C. et al. DBG2OLC: Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies. Sci. Rep. 6, 31900; doi: 10.1038/srep31900 (2016).

http://www.nature.com/articles/srep31900

The manual can be downloaded from:

https://github.com/yechengxi/DBG2OLC/raw/master/Manual.docx

To use precompiled versions,please go to:

https://github.com/yechengxi/DBG2OLC/tree/master/compiled

Address of the bookmark: https://github.com/yechengxi/DBG2OLC

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop

The MARVEL assembler

Jit — Fri, 04 May 2018 19:18:41 -0500

MARVEL consists of a set of tools that facilitate the overlapping, patching, correction and assembly of noisy (not so noisy ones as well) long reads.

The assembly process can be summarized as follows:

overlap
patch reads
overlap (again)
scrubbing
assembly graph construction and touring
optional read correction
fasta file creation

Address of the bookmark: https://github.com/schloi/MARVEL

Oxford Nanopore Sequencing, Hybrid Error Correction, and de novo Assembly of a Eukaryotic Genome

Jit — Wed, 29 Nov 2017 05:08:53 -0600

Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available that we used for sequencing the S. cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr (https://github.com/jgurtowski/nanocorr) specifically for Oxford Nanopore reads, as existing packages were incapable of assembling the long read lengths (5-50kbp) at such high error rate (between ~5 and 40% error). With this new method we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: the contig N50 length is more than ten-times greater than an Illumina-only assembly (678kb versus 59.9kbp), and has greater than 99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

Address of the bookmark: http://schatzlab.cshl.edu/data/nanocorr/

HECIL: A Hybrid Error Correction Algorithm for Long Reads with Iterative Learning

Abhimanyu Singh — Tue, 01 Jan 2019 12:01:00 -0600

HECIL—Hybrid Error Correction with Iterative Learning—a hybrid error correction framework that determines a correction policy for erroneous long reads, based on optimal combinations of decision weights obtained from short read alignments.

HECIL’s core algorithm by introducing an iterative learning paradigm that enhances the correction policy at each iteration by incorporating knowledge gathered from previous iterations via data-driven confidence metrics assigned to prior corrections.

Address of the bookmark: https://github.com/NDBL/HECIL

Rebaler: program for conducting reference-based assemblies using long reads.

Jit — Tue, 18 Sep 2018 07:52:41 -0500

Rebaler is a program for conducting reference-based assemblies using long reads. It relies mainly on minimap2 for alignment and Racon for making consensus sequences.

I made Rebaler for bacterial genomes (specifically for the task of testing basecallers). It should in principle work for non-bacterial genomes as well, but I haven't tested it.

Address of the bookmark: https://github.com/rrwick/Rebaler

FinisherSC: a repeat-aware and scalable tool for upgrading de novo assembly using long reads

Jit — Mon, 27 Feb 2017 09:49:45 -0600

FinisherSC, a repeat-aware and scalable tool for upgrading de novo assembly using long reads. Experiments with real data suggest that FinisherSC can provide longer and higher quality contigs than existing tools while maintaining high concordance.

Address of the bookmark: http://kakitone.github.io/finishingTool/