BOL: Related items

minialign: fast and accurate alignment tool for PacBio and Nanopore long reads

Jit — Thu, 24 May 2018 08:33:26 -0500

Minialign is a little bit fast and moderately accurate nucleotide sequence alignment tool designed for PacBio and Nanopore long reads. It is built on three key algorithms, minimizer-based index of the minimap overlapper, array-based seed chaining, and SIMD-parallel Smith-Waterman-Gotoh extension.

Address of the bookmark: https://github.com/ocxtal/minialign

Wtdbg2: a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore

Neel — Fri, 19 Oct 2018 08:48:43 -0500

Wtdbg2 is a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore Technologies (ONT). It assembles raw reads without error correction and then builds the consensus from intermediate assembly output. Wtdbg2 is able to assemble the human and even the 32Gb Axolotl genome at a speed tens of times faster than CANU and FALCONwhile producing contigs of comparable base accuracy.

Address of the bookmark: https://github.com/ruanjue/wtdbg2

AlignGraph2: similar genome-assisted reassembly pipeline for PacBio long reads

Rahul Nayak — Sun, 14 Mar 2021 09:42:47 -0500

AlignGraph2 is the second version of AlignGraph for PacBio long reads. It extends and refines contigs assembled from the long reads with a published genome similar to the sequencing genome.

More at https://academic.oup.com/bib/advance-article-abstract/doi/10.1093/bib/bbab022/6146772

Address of the bookmark: https://github.com/huangs001/AlignGraph2

Software and Tools to detect structure variation with long reads !!

Archana Malhotra — Wed, 15 Mar 2017 14:31:09 -0500

Uncovering the connection between genetics and heritable diseases requires an approach that looks at all the variant bases and types in a genome. While a PacBio de novo assembly resolves the most novel SV variants. 8-10X PacBio coverage of single genomes or trios reveals triple the SVs detectable by short-read data.

With Single Molecule, Real-Time (SMRT) Sequencing, you can access structural variations having a broad range of sizes, types, and GC content with the ability to:

Uncover missing heritability linked to structural variation
Unambiguously identify genomic context and variant breakpoints at the sequence level to unravel the genetic etiology of disease
Resolve structural variation across the complete size spectrum with basepair resolution

Following are the SV tools, which can assist you to achieve your goal.

Sniffles: Structural variation caller using third generation sequencing

Sniffles is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Please note the current version of Sniffles requires sorted output from BWA-MEM (use -M and -x parameter) or NGM-LR with the optional SAM attributes enabled!

More at https://github.com/fritzsedlazeck/Sniffles

MultiBreak-SV: It identifies structural variants from next-generation paired end data, third-generation long read data, or data from a combination of sequencing platforms.

There are two pieces of software in this release: (1) a pre-processor that takes machineformat (.m5) BLASR files, and (2) MultiBreak-SV. For installation and usage instructions, see doc/MultiBreakSV-Manual.txt.

More at https://github.com/raphael-group/multibreak-sv

Parliament: A Structural Variation Tool. Why ask a single sv-detection approach to find every variant when you can have a parliament of tools deciding?

Publication about the algorithm and “…the first long-read characterization of structural variation in a diploid human personal genome…” (HS1011) - “Assessing structural variation in a personal genome—towards a human reference diploid genome”

More at https://sourceforge.net/projects/parliamentsv/

https://www.dnanexus.com/papers/Parliament_Info_Sheet.pdf

PBHoney: the structural variation discovery tool

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Read The Paper http://www.biomedcentral.com/1471-2105/15/180/abstract

More at https://sourceforge.net/projects/pb-jelly/

SMRT-SV: Structural variant and indel caller for PacBio reads

Structural variant (SV) and indel caller for PacBio reads based on methods from Chaisson et al. 2014.

SMRT-SV provides an official software package for tools described in Chaisson et al. 2014 and adds several key features including the following.

Unified variant calling user interface with built-in cluster compute support
Small indel calling (2-49 bp)
Improved inversion calling (screenInversions)
Quality metric for SV calls based on number of local assemblies supporting each call
Higher sensitivity for SV calls using tiled local assemblies across the entire genome instead of "signature" regions
Genotyping of SVs with Illumina paired-end reads from WGS samples

More at https://github.com/EichlerLab/pacbio_variant_caller

Rebaler: program for conducting reference-based assemblies using long reads.

Jit — Tue, 18 Sep 2018 07:52:41 -0500

Rebaler is a program for conducting reference-based assemblies using long reads. It relies mainly on minimap2 for alignment and Racon for making consensus sequences.

I made Rebaler for bacterial genomes (specifically for the task of testing basecallers). It should in principle work for non-bacterial genomes as well, but I haven't tested it.

Address of the bookmark: https://github.com/rrwick/Rebaler

MafTools

Jit — Thu, 16 Feb 2017 11:16:01 -0600

maftools - An R package to summarize, analyze and visualize MAF files. Introduction.

With advances in Cancer Genomics, Mutation Annotation Format (MAF) is being widley accepted and used to store variants detected. The Cancer Genome Atlas Project has seqenced over 30 different cancers with sample size of each cancer type being over 200. The resulting data consisting of genetic variants is stored in the form of Mutation Annotation Format. This package attempts to summarize, analyze, annotate and visualize MAF files in an efficient manner either from TCGA sources or any in-house studies as long as the data is in MAF format. Maftools can also handle ICGC Simple Somatic Mutation format.

maftools is on bioRxiv

Please cite the below if you find this tool useful for you.

Mayakonda, A. and H.P. Koeffler, Maftools: Efficient analysis, visualization and summarization of MAF files from large-scale cohort based cancer studies. bioRxiv, 2016. doi: http://dx.doi.org/10.1101/052662

Address of the bookmark: https://github.com/PoisonAlien/maftools

BBSplit: Read Binning Tool for Metagenomes and Contaminated Libraries

Poonam Mahapatra — Wed, 03 Jan 2018 00:25:27 -0600

BBSplit internally uses BBMap to map reads to multiple genomes at once, and determine which genome they match best. This is different than with ordinary mapping. If a genome (say, human) contains an exact repeat somewhere, reads mapping to it will be mapped ambiguously. But if you want to determine whether reads are mouse or human, it does not matter whether they map ambiguously within human, only whether they are ambiguous between human and mouse. BBSplit tracks this additional ambiguity information and decides how to use it based on the “ambig2” flag. The normal use of BBSplit is like Seal, either quantifying how many reads go to each reference, or splitting the reads into multiple output files, one per reference. BBSplit can only be run using references indexed with BBSplit, as they contain additional information regarding which sequences came from which reference file.

BBSplit is a tool that bins reads by mapping to multiple references simultaneously, using BBMap. The reads go to the bin of the reference they map to best. There are also disambiguation options, such that reads that map to multiple references can be binned with all of them, none of them, one of them, or put in a special "ambiguous" file for each of them. Paired reads will always be kept together.

For example, if you had a library of something that was contaminated with e.coli and salmonella, you could do this:

bbsplit.sh in=reads.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu=clean.fq int=t

This will produce 3 output files:
out_ecoli.fq (ecoli reads)
out_salmonella.fq (salmonella reads)
clean.fq (unmapped reads)

In this case, "int=t" means that the input file is paired and interleaved. For single-end reads you would leave that out. For paired reads in 2 files, you would do this:
bbsplit.sh in1=reads1.fq in2=reads2.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu1=clean1.fq outu2=clean2.fq

BBSplit is available here:
https://sourceforge.net/projects/bbmap/

The sensitivity can be raised to be equivalent to BBMap with these flags: "minratio=0.56 minhits=1 maxindel=16000"

CoverM: Read coverage calculator for metagenomics

Neel — Thu, 29 Apr 2021 23:39:14 -0500

CoverM aims to be a configurable, easy to use and fast DNA read coverage and relative abundance calculator focused on metagenomics applications.

CoverM calculates coverage of genomes/MAGs coverm genome (help) or individual contigs coverm contig (help). Calculating coverage by read mapping, its input can either be BAM files sorted by reference, or raw reads and reference genomes in various formats.

Address of the bookmark: https://github.com/wwood/CoverM

NanoSim: nanopore sequence read simulator based on statistical characterization.

Jit — Mon, 18 Dec 2017 04:16:31 -0600

NanoSim, a fast and scalable read simulator that captures the technology-specific features of ONT data and allows for adjustments upon improvement of nanopore sequencing technology. The first step of NanoSim is read characterization, which provides a comprehensive alignment-based analysis and generates a set of read profiles serving as the input to the next step, the simulation stage. The simulation stage uses the model built in the previous step to produce in silico reads for a given reference genome. NanoSim is written in Python and R. The source files and manual are available at the Genome Sciences Centre website: http://www.bcgsc.ca/platform/bioinfo/software/nanosim

https://github.com/bcgsc/NanoSim

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/nanosim

nanofilt: Filtering and trimming of long read sequencing data

Jit — Mon, 30 Jul 2018 12:01:52 -0500

Filtering on quality and/or read length, and optional trimming after passing filters.
Reads from stdin, writes to stdout.

Intended to be used:

directly after fastq extraction
prior to mapping
in a stream between extraction and mapping

https://github.com/wdecoster/nanofilt

Address of the bookmark: https://github.com/wdecoster/nanofilt