Address of the bookmark: http://www.citrusperl.com/

Address of the bookmark: http://cbb.sjtu.edu.cn/course/database/beginning.pdf

Perl one-liners are small and awesome Perl programs that fit in a single line of code and they do one thing really well. These things include changing line spacing, numbering lines, doing calculations, converting and substituting text, deleting and printing certain lines, parsing logs, editing files in-place, doing statistics, carrying out system administration tasks, updating a bunch of files at once, and many more. Perl one-liners will make you the shell warrior. Anything that took you minutes to solve, will now take you seconds!

perl -pe '$\="\n"'   
#double space a file

perl -pe '$_ .= "\n" unless /^$/'
#double space a file except blank lines

perl -pe '$_.="\n"x7'
#7 space in a line.

perl -ne 'print unless /^$/'
#remove all blank lines

perl -lne 'print if length($_) < 20'
#print all lines with length less than 20.

perl -00 -pe ''
#If there are multiple spaces, delete all leaving one(make the file a single spaced file).

perl -00 -pe '$_.="\n"x4'
#Expand single blank lines into 4 consecutive blank lines

perl -pe '$_ = "$. $_"'
#Number all lines in a file

perl -pe '$_ = ++$a." $_" if /./'
#Number only non-empty lines in a file

perl -ne 'print ++$a." $_" if /./'
#Number and print only non-empty lines in a file

perl -pe '$_ = ++$a." $_" if /regex/'
#Number only lines that match a pattern

perl -ne 'print ++$a." $_" if /regex/'
#Number and print only lines that match a pattern

perl -ne 'printf "%-5d %s", $., $_ if /regex/'
#Left align lines with 5 white spaces if matches a pattern (perl -ne 'printf "%-5d %s", $., $_' : for all the lines)

perl -le 'print scalar(grep{/./}<>)'
#prints the total number of non-empty lines in a file

perl -lne '$a++ if /regex/; END {print $a+0}'
#print the total number of lines that matches the pattern

perl -alne 'print scalar @F'
#print the total number fields(words) in each line.

perl -alne '$t += @F; END { print $t}'
#Find total number of words in the file

perl -alne 'map { /regex/ && $t++ } @F; END { print $t }'
#find total number of fields that match the pattern

perl -lne '/regex/ && $t++; END { print $t }'
#Find total number of lines that match a pattern

perl -le '$n = 20; $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $m'
#will calculate the GCD of two numbers.

perl -le '$a = $n = 20; $b = $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $a*$b/$m'
#will calculate lcd of 20 and 35.

perl -le '$n=10; $min=5; $max=15; $, = " "; print map { int(rand($max-$min))+$min } 1..$n'
#Generates 10 random numbers between 5 and 15.

perl -le 'print map { ("a".."z",”0”..”9”)[rand 36] } 1..8'
#Generates a 8 character password from a to z and number 0 – 9.

perl -le 'print map { ("a",”t”,”g”,”c”)[rand 4] } 1..20'
#Generates a 20 nucleotide long random residue.

perl -le 'print "a"x50'
#generate a string of ‘x’ 50 character long

perl -le 'print join ", ", map { ord } split //, "hello world"'
#Will print the ascii value of the string hello world.

perl -le '@ascii = (99, 111, 100, 105, 110, 103); print pack("C*", @ascii)'
#converts ascii values into character strings.

perl -le '@odd = grep {$_ % 2 == 1} 1..100; print "@odd"'
#Generates an array of odd numbers.

perl -le '@even = grep {$_ % 2 == 0} 1..100; print "@even"'
#Generate an array of even numbers

perl -lpe 'y/A-Za-z/N-ZA-Mn-za-m/' file
#Convert the entire file into 13 characters offset(ROT13)

perl -nle 'print uc'
#Convert all text to uppercase:

perl -nle 'print lc'
#Convert text to lowercase:

perl -nle 'print ucfirst lc'
#Convert only first letter of first word to uppercas

perl -ple 'y/A-Za-z/a-zA-Z/'
#Convert upper case to lower case and vice versa

perl -ple 's/(\w+)/\u$1/g'
#Camel Casing

perl -pe 's|\n|\r\n|'
#Convert unix new lines into DOS new lines:

perl -pe 's|\r\n|\n|'
#Convert DOS newlines into unix new line

perl -pe 's|\n|\r|'
#Convert unix newlines into MAC newlines:

perl -pe '/regexp/ && s/foo/bar/'
#Substitute a foo with a bar in a line with a regexp.

Reference/Sources:

http://genomics-array.blogspot.in/2010/11/some-unixperl-oneliners-for.html

http://genomespot.blogspot.com/2013/08/a-selection-of-useful-bash-one-liners.html

http://biowize.wordpress.com/2012/06/15/command-line-magic-for-your-gene-annotations/

http://genomics-array.blogspot.com/2010/11/some-unixperl-oneliners-for.html

http://bioexpressblog.wordpress.com/2013/04/05/split-multi-fasta-sequence-file/

#Find all occurrences of a pattern in a string.
#Given: Strings Pattern and Genome.
#Return: All starting positions in Genome where Pattern appears as a substring. Use 0-based indexing.

use strict;
use warnings;

my $string="GATATATGCATATACTT";
my $subStr="ATAT";
my $kmer=length($subStr);

kmerMatch ($string, $subStr, $kmer);

sub kmerMatch { #Check the exact matching kmers with sliding window
my ($string, $myStr, $kmer)=@_;
for (my $aa=0; $aa<=(length($string)-$kmer); $aa++) {
    my $myWin=substr  $string, $aa,$kmer;
    if ($myWin eq $myStr) {
        #print "$myWin eq $myStr\n";
        print $aa;
    }
}
}

The next-generation sequencing included whole genome sequencing(WGS), transcriptome sequencing (whole cDNA sequencing, RNA-seq), digital gene expression sequencing (Tag-Seq), ChIP-Seq, and so on. And there are many sequencing platform to generate sequece, as well know Sanger/ABi(the frist generation), Solexa/illumina, SOLiD/ABi, 454/Roche. But thier sequence format is different, also they have different error type. High quality data is very important for further analysis or data mining. There are many pipeline for raw sequence quality analysis and control with few of process for reporting reads quality statistical details, trimming, filtering, and error correction. Please bookmarks them for the benefits of bioinformatics community.

https://code.google.com/p/biowiki/

https://code.google.com/p/ngs-pipeline/source/browse/#svn%2Ftrunk

NGSand Perl scripts https://code.google.com/hosting/search?q=NGS+perl&projectsearch=Search+projects

NGS and Python scripts https://code.google.com/hosting/search?q=NGS+Python&projectsearch=Search+projects

Address of the bookmark: https://code.google.com/hosting/search?q=bioinformatics&sa=Search

You see, for the past couple of years, I’ve been a bit frustrated because OS X does not come with a whole lot of Perl modules pre-installed, and for all I googled, I couldn’t find an “idiot’s” guide for moderately-savvy-but-not-expert users like myself to install modules and dependencies on demand.

The only instructions I could find point to Fink, which basically installs modules in a path that isn’t included in the Perl @INC variable, meaning you have to manually specify the full path to the modules in every script — which is not a lot of fun if you’re developing on OS X and deploying on Red Hat, for instance.

Moreover, Fink doesn’t seem to make every module available, and it’s not very easy to determine which Fink package you need to install if you need a particular module.

So, with a script that called on several apparently unavailable modules, and a deadline looming, I finally decided to suck it up and figure out how to use CPAN to install them:

1) Make sure you have the Apple Developer Tools (XCode) installed.

These are on one of your install discs, or available as a huge but free download from the Apple Developer Connection [free registration required] or the Mac App Store. I thought I had them, but apparently when we upgraded that computer to Tiger, they went missing.

If you don’t have this stuff installed, your installation will fail with errors about unavailable commands.

1.5) Install Command Line Tools (Recent XCode versions only)

(Thank you to Tom Marchioro for informing me about this step.)

Older versions of XCode installed the command line tools (which are required to properly install CPAN modules) by default, but apparently newer ones do not. To check whether you have the command line tools already installed, run the following from the Terminal:

$ which make

This command checks the system for the “make” tool. If it spits out something like /usr/bin/make you’re golden and can skip ahead to Step 2. If you just get a new prompt and no output, you’ll need to install the tools:

1. Launch XCode and bring up the Preferences panel.
2. Click on the Downloads tab
3. Click to install the Command Line Tools

If you like, you can run which make again to confirm that everything’s installed correctly.

2) Configure CPAN.

$ sudo perl -MCPAN -e shell

perl> o conf init

This will prompt you for some settings. You can accept the defaults for almost everything (just hit “return”). The two things you must fill in are the path to make (which should be /usr/bin/make or the value returned when you run which make from the command line) and your choice of CPAN mirrors (which you actually choose don’t really matter, but it won’t let you finish until you select at least one). If you use a proxy or a very restrictive firewall, you may have to configure those settings as well.

If you skip Step 2, you may get errors about make being unavailable.

3) Upgrade CPAN

$ sudo perl -MCPAN -e 'install Bundle::CPAN'

Don’t forget the sudo, or it’ll fail with permissions errors, probably when doing something relatively unimportant like installing man files.

This will spend a long time downloading, testing, and compiling various files and dependencies. Bear with it. It will prompt you a few times about dependencies. You probably want to enter “yes”. I agreed to everything it asked me, and everything turned out fine. YMMV of course. If everything installs properly, it’ll give you an “OK” at the end.

4) Install your modules. For each module….

$ sudo perl -MCPAN -e 'install Bundle::Name'

or

$ sudo perl -MCPAN -e 'install Module::Name'

This will install the module and its dependencies. Nice, eh? Again, don’t forget the sudo.

The first time you run this after upgrading CPAN, it may prompt you to configure again (see Step 2). If you accept its offer to try to configure itself automatically, it may just run through everything without a problem.

There are a couple of potential pitfalls with specific modules (such as theLWP::UserAgent / HEAD issue), but most have workarounds, and I haven’t run into anything that wasn’t easily recoverable.

And that’s it!

Did you find this useful? Is there anything I missed?

Perl script for creating a publication-ready vectorial genetic/linkage map in Scalable Vector Graphics (SVG) format. The resulting file can either be submitted for publication and edited with any vectorial drawing software like Inkscape and Abobe Illustrator(R).

The input file must be a text file with at least the marker name (ID), linkage group (LG) and the position (POS) separeted by tabulations. Additionally a logarithm of odds (LOD score) can be provided. Any extra parameter will be ignored.

map.tsv

ID<tab>LG<tab>POS<tab>LOD
13519  12     0       0.250840894
2718   12     1.0     0.250840893
11040  12     1.6     0.252843341
...

https://github.com/pseudogene/genetic-mapper

Address of the bookmark: https://github.com/pseudogene/genetic-mapper

Install latest Perl (with supporting multithreading) and CPANMinus.

 $ cd
 $ git clone git://github.com/tokuhirom/plenv.git ~/.plenv
 $ git clone git://github.com/tokuhirom/Perl-Build.git ~/.plenv/plugins/perl-build/
 $ echo 'export PATH="$HOME/.plenv/bin:$PATH"' >> ~/.bashrc
 $ echo 'eval "$(plenv init -)"' >> ~/.bashrc
 $ source ~/.bashrc
 $ plenv install 5.18.1 -Dusethreads
 $ plenv rehash
 $ plenv global 5.18.1
 $ plenv install-cpanm

• git is a distributed revision control and source code management software which can help you to download files from GitHub server.
• echo means "print".
• >> means adding the output into the end of the file, while > means adding the output by overwriting the whole file. Please use> with additional cares.
• In Linux system, there are two types of outputs when you execute a command. One is called standard output (or sometimes STDOUT for short), and the other is a standard error (STDERR). 1> is for STDOUT only, 2> is for STDERR only, and &>means for both. In default > is the same to 1>.
• exec is execution.
• Remember to install Perl in supporting multithreading (with option -Dusethreads), which is important for many NGS analysis packages (e.g. Trinity). In this setting, you can use multiple CPU for Perl software.
• Install the CPAN (Comprehensive Perl Archive Network) manager software, CPANMinus, by install-cpanm.

You can use plenv global and plenv local to change the different version of Perl to fulfil different needs of your Perl software.

For example, if the specific version of Perl is not compatible with your script, you can switch to the different version by:

 $ plenv local 

• It is similar to set the local version of your script language when you use pyenv and rbenv as the following.

Put the following path into ~/.bashrc file.

export PERL5LIB="$HOME/.plenv/build/perl-5.18.1/lib"

Install BioPerl and PerlIO::gzip

CPANMinus is a very good Perl module manager, use cpanm to install BioPerl can save you a lot of time. Here are some useful modules:

$ cpanm Bio::Perl
$ cpanm Bio::SearchIO
$ cpanm PerlIO::gzip

For more information, please visit: https://github.com/tokuhirom/plenv

Special Symbols – File handlers

$@ Perl error string

$! Error number from C, ‘errno’

$^E Extended OS error info, such as ‘CDROM tray not closed’

$? Exit status from last process

$AGRV – name of current file

@ARGV – command line arguments

$ARGV – special file handle for command line filenames

$. – current line number

$/ - input line delimiter

$\ - output line delimiter

$% - current page number

$&/${^MATCH} – last successful matching string

$`/${^PREMATCH} – the string preceding the last matching string

$’/${^POSTMATCH} – the string following the last matching string

$1, $2, … - matching groups in the parentheses in pattern

More at https://www.tutorialspoint.com/perl/perl_special_variables.htm

To find repeats in a genome from 2 to 9 length using a Perl script, you can use the RepeatMasker tool with the "--length" option[0]. Here's a step-by-step guide: