BOL: Related items

BBSplit: Read Binning Tool for Metagenomes and Contaminated Libraries

Poonam Mahapatra — Wed, 03 Jan 2018 00:25:27 -0600

BBSplit internally uses BBMap to map reads to multiple genomes at once, and determine which genome they match best. This is different than with ordinary mapping. If a genome (say, human) contains an exact repeat somewhere, reads mapping to it will be mapped ambiguously. But if you want to determine whether reads are mouse or human, it does not matter whether they map ambiguously within human, only whether they are ambiguous between human and mouse. BBSplit tracks this additional ambiguity information and decides how to use it based on the “ambig2” flag. The normal use of BBSplit is like Seal, either quantifying how many reads go to each reference, or splitting the reads into multiple output files, one per reference. BBSplit can only be run using references indexed with BBSplit, as they contain additional information regarding which sequences came from which reference file.

BBSplit is a tool that bins reads by mapping to multiple references simultaneously, using BBMap. The reads go to the bin of the reference they map to best. There are also disambiguation options, such that reads that map to multiple references can be binned with all of them, none of them, one of them, or put in a special "ambiguous" file for each of them. Paired reads will always be kept together.

For example, if you had a library of something that was contaminated with e.coli and salmonella, you could do this:

bbsplit.sh in=reads.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu=clean.fq int=t

This will produce 3 output files:
out_ecoli.fq (ecoli reads)
out_salmonella.fq (salmonella reads)
clean.fq (unmapped reads)

In this case, "int=t" means that the input file is paired and interleaved. For single-end reads you would leave that out. For paired reads in 2 files, you would do this:
bbsplit.sh in1=reads1.fq in2=reads2.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu1=clean1.fq outu2=clean2.fq

BBSplit is available here:
https://sourceforge.net/projects/bbmap/

The sensitivity can be raised to be equivalent to BBMap with these flags: "minratio=0.56 minhits=1 maxindel=16000"

CViT: Chromosome Viewing Tool

Rahul Nayak — Wed, 02 Jan 2019 04:10:09 -0600

CViT - Chromosome Viewing Tool. A collection of Perl scripts that enable quick visualizations of features on linkage groups, psuedochromosomes or cytogenetic maps. Intended for whole-genome views of data but can be used to create images of single chromosomes/linkage groups, contigs, or BACs, or even proteins -- any feature that has a location on a backbone. Handles most standard genetic/genomic coordinate systems. Reads GFF3 data and produces a PNG or SVG image.

https://www.hindawi.com/journals/ijpg/2011/373875/

Address of the bookmark: https://sourceforge.net/projects/cvit/

R Package for PCA Analysis

LEGE — Sun, 24 Mar 2024 20:06:24 -0500

An R package for performing principal component analysis (PCA) of genomics data. The package performs PCA, generates the publication-ready plots, and identifies population-specific outlier individuals. The package can be accessed on GitHub: https://github.com/Devashish13/PopulationStructure

Address of the bookmark: https://rpubs.com/Devashish13/PCAGenomics

From DNA Chaos to a Clear Microbial Story

BioStar — Fri, 21 Aug 2026 11:22:54 -0500

Imagine opening a metagenomic dataset and finding millions of DNA fragments, each carrying a tiny piece of information about the microbial world inside a sample. The challenge is not generating the data — it is turning that data into a meaningful story.

This is where MeTAline comes in.

MeTAline is a reproducible workflow designed to simplify shotgun metagenomic analysis. It brings together important steps such as quality control, host-DNA removal, taxonomic profiling and functional analysis, using tools including Kraken2, MetaPhlAn4 and HUMAnN.

What makes it especially useful is its ability to handle large datasets while keeping analyses organized and reproducible. Built with Snakemake and supporting containerized environments, MeTAline can also be used on high-performance computing systems.

In simple terms, MeTAline helps researchers move from millions of confusing DNA fragments to a clearer picture of who is there, what they might be doing, and what the data could mean.

Sometimes, the biggest challenge in science isn't collecting more data — it's finding the story hidden inside it.

Read more at https://academic.oup.com/nargab/article/7/4/lqaf158/8340158?login=false

DAVI: Deep learning-based tool for alignment and single nucleotide variant identification

Jit — Tue, 16 Mar 2021 05:41:33 -0500

DAVI consists of models for both global and local alignment and for variant calling. We have evaluated the performance of DAVI against existing state-of-the-art tool sets and found that its accuracy and performance is comparable to existing tools used for bench-marking. We further demonstrate that while existing tools are based on data generated from a specific sequencing technology, the models proposed in DAVI are generic and can be used across different NGS technologies as well as across different species

https://iopscience.iop.org/article/10.1088/2632-2153/ab7e19/pdf

Address of the bookmark: https://github.com/gguptaiitd/NEAT

Circleator

Jit — Sun, 25 Jun 2017 18:04:32 -0500

The Charm City Circleator--or Circleator for short--is a Perl-based visualization tool developed at the Institute for Genome Sciences in the University of Maryland's School of Medicine. Circleator produces circular plots of genome-associated data, like this one:

Common uses of the tool include:

Displaying the sequence and/or genes in a GenBank flat file.
Highlighting differences and/or similarities in gene content between related organisms.
Comparing SNPs and indels between closely-related strains or serovars.
Comparing gene expression values across multiple samples or timepoints.
Visualizing coverage plots of RNA-Seq read alignments.

Key Features

Circleator...

Builds on BioPerl and the input file formats that it supports, including:
- GenBank flat files, GFF, FASTA
Accepts a number of other commonly-used datatypes and file formats:
- BSR and TRF output, SAM/BAM files, VCF-encoded SNPs, tab-delimited files
Outputs publication-ready figures in the SVG (Scalable Vector Graphics) format.
Requires only a single configuration file whose layout mirrors that of the figure itself.
- Predefined configuration files and "track" types are supplied for common datasets.
- Advanced features allow limited analyses to be performed as a figure is drawn.
Includes an extensive set of regression tests.
Offers a prototype web-based GUI (under the "Ringmaster" project.)

https://github.com/jonathancrabtree/Circleator

Address of the bookmark: https://github.com/jonathancrabtree/Circleator

CHSMiner: a GUI tool to identify chromosomal homologous segments

Jit — Sat, 18 Nov 2017 16:55:49 -0600

Background

The identification of chromosomal homologous segments (CHS) within and between genomes is essential for comparative genomics. Various processes including insertion/deletion and inversion could cause the degeneration of CHSs.

Results

Here we present a Java software CHSMiner that detects CHSs based on shared gene content alone. It implements fast greedy search algorithm and rigorous statistical validation, and its friendly graphical interface allows interactive visualization of the results. We tested the software on both simulated and biological realistic data and compared its performance with similar existing software and data source.

Conclusion

CHSMiner is characterized by its integrated workflow, fast speed and convenient usage. It will be useful for both experimentalists and bioinformaticians interested in the structure and evolution of genomes.

https://github.com/zhenwang100/CHSMiner

Address of the bookmark: https://almob.biomedcentral.com/articles/10.1186/1748-7188-4-2

Mugsy: multiple whole genome alignment tool

Jit — Fri, 08 Dec 2017 17:41:14 -0600

Mugsy is a multiple whole genome aligner. Mugsy uses Nucmer for pairwise alignment, a custom graph based segmentation procedure for identifying collinear regions, and the segment-based progressive multiple alignment strategy from Seqan::TCoffee. Mugsy accepts draft genomes in the form of multi-FASTA files and does not require a reference genome.

To cite Mugsy, use:

Angiuoli SV and Salzberg SL. Mugsy: Fast multiple alignment of closely related whole genomes.Bioinformatics 2011 27(3):334-4

Address of the bookmark: http://mugsy.sourceforge.net/

Multi-CAR: a tool of contig scaffolding using multiple references

Rahul Nayak — Tue, 06 Mar 2018 16:39:41 -0600

we design a simple heuristic method to further revise our single reference-based scaffolding tool CAR into a new one called Multi-CAR such that it can utilize multiple complete genomes of related organisms as references to more accurately order and orient the contigs of a draft genome. In practical usage, our Multi-CAR does not require prior knowledge concerning phylogenetic relationships among the draft and reference genomes and libraries of paired-end reads. To validate Multi-CAR, we have tested it on a real dataset composed of several prokaryotic genomes and also compared its accuracy performance with other multiple reference-based scaffolding tools Ragout and MeDuSa.

Address of the bookmark: http://genome.cs.nthu.edu.tw/Multi-CAR/

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop