BOL: Related items

shinyChromosome:a GUI for the interactive creation of non-circular whole genome diagrams

Jit — Sat, 29 Feb 2020 00:39:50 -0600

shinyChromosome is a graphical user interface for interactive creation of non-circular whole genome diagrams developed using the R Shiny package.

To create single-genome plot by aligning genome data along all chromosomes of a single genome, go to the Single-genome plot menu.

To cretae two-genome plot for comparison of data across two genomes, go to the Two-genome plot menu.

For the detail format of input data, check the Input data format submenu of the Help menu.

shinyChromosome is deployed at http://150.109.59.144:3838/shinyChromosome/, http://shinyChromosome.ncpgr.cn, and https://yimingyu.shinyapps.io/shinyChromosome for online use. The source code and manual of shinyChromosome are freely available at https://github.com/venyao/shinyChromosome.

https://yimingyu.shinyapps.io/shinychromosome/

https://www.sciencedirect.com/science/article/pii/S1672022919301883

Address of the bookmark: https://yimingyu.shinyapps.io/shinychromosome/

HASLR: a hybrid assembler which uses both second and third generation sequencing reads

BioStar — Mon, 04 May 2020 02:04:03 -0500

HASLR, a hybrid assembler which uses both second and third generation sequencing reads to efficiently generate accurate genome assemblies. Our experiments show that HASLR is not only the fastest assembler but also the one with the lowest number of misassemblies on all the samples compared to other tested assemblers. Furthermore, the generated assemblies in terms of contiguity and accuracy are on par with the other tools on most of the samples. Availability. HASLR is an open source tool available at https://github.com/vpc-ccg/haslr.

Address of the bookmark: https://github.com/vpc-ccg/haslr

Pollard Lab

Fri, 25 Sep 2020 20:20:50 -0500

We are a bioinformatics research lab focused on developing novel methods and using them to study genome evolution, organization, and regulation. Our mission is to decode biomedical knowledge that is missed without rigorous statistical approaches.

http://docpollard.org/

Tools

http://docpollard.org/resources/software/

Ancient whole genome duplication (WGD) detection tools !

Rahul Nayak — Sun, 07 Mar 2021 00:32:44 -0600

There are two methods for ancient WGD detection, one is collinearity analysis, and the other is based on the Ks distribution map. Among them, Ks is defined as the average number of synonymous substitutions at each synonymous site, and there is also a Ka corresponding to it, which refers to the average number of non-synonymous substitutions at each non-synonymous site.

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

For more reading - There are 9 sub-modules in WGD

kde: KDE fitting to the Ks distribution
ksd: Ks distribution construction
mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
mix: Hybrid modeling of Ks distribution.
pre: preprocess the CDS file
syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
viz: draw histogram and density plot
wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

Calling variants in non-diploid systems

Neel — Sat, 26 Jun 2021 15:37:49 -0500

The main challenge associated with non-diploid variant calling is the difficulty in distinguishing between the sequencing noise (abundant in all NGS platforms) and true low frequency variants. Some of the early attempts to do this well have been accomplished on human mitochondrial DNA although the same approaches will work equally good on viral and bacterial genomes (Rebolledo-Jaramillo et al. 2014, Li et al. 2015).

Address of the bookmark: https://training.galaxyproject.org/training-material/topics/variant-analysis/tutorials/non-dip/tutorial.html

MitoZ: a toolkit for animal mitochondrial genome assembly, annotation and visualization

Neel — Tue, 30 Nov 2021 23:23:57 -0600

MitoZ, consisting of independent modules of de novo assembly, findMitoScaf (find Mitochondrial Scaffolds), annotation and visualization, that can generate mitogenome assembly together with annotation and visualization results from HTS raw reads.

https://academic.oup.com/nar/article/47/11/e63/5377471

Address of the bookmark: https://github.com/linzhi2013/MitoZ

maftools

Surabhi Chaudhary — Fri, 17 Dec 2021 03:18:28 -0600

With advances in Cancer Genomics, Mutation Annotation Format (MAF) is being widely accepted and used to store somatic variants detected. The Cancer Genome Atlas Project has sequenced over 30 different cancers with sample size of each cancer type being over 200. Resulting data consisting of somatic variants are stored in the form of Mutation Annotation Format. This package attempts to summarize, analyze, annotate and visualize MAF files in an efficient manner from either TCGA sources or any in-house studies as long as the data is in MAF format.

https://www.bioconductor.org/packages/devel/bioc/vignettes/maftools/inst/doc/maftools.html

Address of the bookmark: https://github.com/PoisonAlien/maftools

Short-read assembly using Spades !

Abhimanyu Singh — Mon, 31 Jan 2022 07:18:16 -0600

If we only had Illumina reads, we could also assemble these using the tool Spades.

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

illumina_R1.fastq.gz: the Illumina forward reads
illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

-1 is input file of forward reads
-2 is input file of reverse reads
--careful minimizes mismatches and short indels
--cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
-o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

Monkeypox virus isolate MPXV_USA_2022_MA001, complete genome

Jit — Tue, 26 Jul 2022 06:21:07 -0500

LOCUS       ON563414              197205 bp    DNA     linear   VRL 30-MAY-2022
DEFINITION  Monkeypox virus isolate MPXV_USA_2022_MA001, complete genome.
ACCESSION   ON563414
VERSION     ON563414.3
KEYWORDS    .
SOURCE      Monkeypox virus (monkeypox)
  ORGANISM  Monkeypox virus
            Viruses; Varidnaviria; Bamfordvirae; Nucleocytoviricota;
            Pokkesviricetes; Chitovirales; Poxviridae; Chordopoxvirinae;
            Orthopoxvirus.

Address of the bookmark: https://www.ncbi.nlm.nih.gov/nuccore/ON563414

MitoHiFi: a python pipeline for mitochondrial genome assembly from PacBio high fidelity reads

Abhi — Tue, 05 Sep 2023 07:31:35 -0500

MitoHiFi v3.2 is a python pipeline distributed under MIT License !

MitoHiFi was first developed to assemble the mitogenomes for a wide range of species in the Darwin Tree of Life Project (DToL)

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-023-05385-y

Address of the bookmark: https://github.com/marcelauliano/MitoHiFi