BOL: Related items

Platanus

Jit — Fri, 13 May 2016 05:12:40 -0500

Platanus is a novel de novo sequence assembler that can reconstruct genomic sequences of
highly heterozygous diploids from massively parallel shotgun sequencing data.

The latest version is 1.2.4.

To cite Platanus, please use the following:

Kajitani R, Toshimoto K, Noguchi H, Toyoda A, Ogura Y, Okuno M, Yabana M, Harada M, Nagayasu E, Maruyama H, Kohara Y, Fujiyama A, Hayashi T, Itoh T, “Efficient de novo assembly of highly heterozygous genomes from whole-genome shotgun short reads”. Genome Res. 2014 Aug;24(8):1384-95. doi: 10.1101/gr.170720.113. [abstract | full text]

Address of the bookmark: http://platanus.bio.titech.ac.jp/

Blobsplorer

Jit — Tue, 14 Jun 2016 10:28:58 -0500

Blobsplorer is a tool for interactive visualization of assembled DNA sequence data ("contigs") derived from (often unintentionally) mixed-species pools. It allows the simultaneous display of GC content, coverage, and taxonomic annotation for collections of contigs with a view to separating out those belonging to different taxa.

Blobsplorer is unlikely to be of use on its own as it requires contig data to be supplied in a format that involves considerable preprocessing (see below for a description). The easiest way to use Blobsplorer is as part of a workflow using scripts from here.

Address of the bookmark: http://nematodes.org/martin/blobsplorer/blobsplorer.html

EAGER

Jit — Sat, 10 Dec 2016 18:07:23 -0600

The automated reconstruction of genome sequences in ancient genome analysis is a multifaceted process.

EAGER encompasses both state-of-the-art tools for each step as well as new complementary tools tailored for ancient DNA data within a single integrated solution in an easily accessible format.

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-016-0918-z

Address of the bookmark: https://github.com/apeltzer/EAGER-GUI

NovelSeq: Novel Sequence Insertion Detection

Neel — Fri, 09 Jun 2017 04:31:30 -0500

The NovelSeq framework is designed to detect novel sequence insertions using high throughput paired-end whole genome sequencing data.

http://novelseq.sourceforge.net/Home

Paper at https://www.ncbi.nlm.nih.gov/pubmed/20385726

Address of the bookmark: http://novelseq.sourceforge.net/Home

GAPPadder: A Sensitive Approach for Closing Gaps on Draft Genomes with Short Sequence Reads

Jit — Mon, 14 May 2018 05:25:48 -0500

This software is provided ``as is” without warranty of any kind. In no event shall the author be held responsible for any damage resulting from the use of this software. The program package, including source codes, executables, and this documentation, is distributed free of charge. If you use this program in a publication, please cite the following reference:
Chong Chu, Xin Li, and Yufeng Wu. "GAPPadder: A Sensitive Approach for Closing Gaps on Draft Genomes with Short Sequence Reads." bioRxiv (2017): 125534.

Address of the bookmark: https://github.com/Reedwarbler/GAPPadder

Sequence Tube Maps: displays multiple genomic sequences in the form of a tube map

Jit — Wed, 11 Mar 2020 01:12:06 -0500

A JavaScript module for the visualization of genomic sequence graphs. It automatically generates a "tube map"-like visualization of sequence graphs which have been created with vg. (https://github.com/vgteam/vg)

Link to working demo: https://vgteam.github.io/sequenceTubeMap/

Address of the bookmark: https://github.com/vgteam/sequenceTubeMap

SeqFu: A Suite of Utilities for the Robust and Reproducible Manipulation of Sequence Files

Rahul Nayak — Tue, 01 Mar 2022 03:13:33 -0600

A general-purpose program to manipulate and parse information from FASTA/FASTQ files, supporting gzipped input files. Includes functions to interleave and de-interleave FASTQ files, to rename sequences and to count and print statistics on sequence lengths. SeqFu is available for Linux and MacOS.

A compiled program delivering high performance analyses
Supports FASTA/FASTQ files, also Gzip compressed
A growing collection of handy utilities, also for quick inspection of the datasets

Can be easily installed via conda:

conda install -c bioconda seqfu

Address of the bookmark: https://telatin.github.io/seqfu2/

Tbl2asn: a command-line program that automates the creation of sequence records for submission to GenBank

Poonam Mahapatra — Mon, 29 May 2017 07:37:08 -0500

Tbl2asn is a command-line program that automates the creation of sequence records for submission to GenBank. It uses many of the same functions as Sequin but is driven generally by data files. Tbl2asn generates .sqn files for submission to GenBank. Additional manual editing is not required before submission.

Tbl2asn is available by anonymous FTP. Copy the right version for your platform, then uncompress the file, rename it to "tbl2asn", and set the permissions, as necessary for the platform.

Address of the bookmark: https://www.ncbi.nlm.nih.gov/genbank/tbl2asn2/

Alignment-free sequence comparison tools available for next-generation sequencing data analysis

Abhimanyu Singh — Tue, 07 Nov 2017 05:33:33 -0600

kallisto

Transcript abundance quantification from RNA-seq data (uses pseudoalignment for rapid determination of read compatibility with targets)

Software (C++)

https://pachterlab.github.io/kallisto/

Sailfish

Estimation of isoform abundances from reference sequences and RNA-seq data (k-mer based)

Software (C++)

http://www.cs.cmu.edu/~ckingsf/software/sailfish/

Salmon

Quantification of the expression of transcripts using RNA-seq data (uses k-mers)

https://combine-lab.github.io/salmon/

RNA-Skim

RNA-seq quantification at transcript-level (partitions the transcriptome into disjoint transcript clusters; uses sig-mers, a special type of k-mers)

Software (C++)

http://www.csbio.unc.edu/rs/

Variant calling

ChimeRScope

Fusion transcript prediction using gene k-mers profiles of the RNA-seq paired-end reads

Software (Java)

https://github.com/ChimeRScope/ChimeRScope/wiki

FastGT

Genotyping of known SNV/SNP variants directly from raw NGS sequence reads by counting unique k-mers

Software (C)

https://github.com/bioinfo-ut/GenomeTester4/

Phy-Mer

Reference-independent mitochondrial haplogroup classifier from NGS data (k-mer based)

Software (Python)

https://github.com/danielnavarrogomez/phy-mer

LAVA

Genotyping of known SNPs (dbSNP and Affymetrix's Genome-Wide Human SNP Array) from raw NGS reads (k-mer based)

Software (C)

http://lava.csail.mit.edu/

MICADo

Detection of mutations in targeted third-generation NGS data (can distinguish patients’ specific mutations; algorithm uses k-mers and is based on colored de Bruijn graphs)

Software (Python)

http://github.com/cbib/MICADo

General mapper

Minimap

Lightweight and fast read mapper and read overlap detector (uses the concept of “minimazers”, a special type of k-mers)

Software (C)

https://github.com/lh3/minimap

Assembly

De novo genome assembly

MHAP

Produces highly continuous assembly (fully resolved chromosome arms) from third-generation long and noisy reads (10 kbp) using a dimensionality reduction technique MinHash

Software (Java)

https://github.com/marbl/MHAP

Miniasm

Assembler of long noisy reads (SMRT, ONT) using the Overlap-Layout Consensus (OLC) approach without the necessity of an error correction stage (uses minimap)

Software (C)

https://github.com/lh3/miniasm

LINKS

Scaffolding genome assembly with error-containing long sequence (e.g., ONT or PacBio reads, draft genomes)

Software (Perl)

https://github.com/warrenlr/LINKS/

Read clustering

afcluster

Clustering of reads from different genes and different species based on k-mer counts

Software (C++)

https://github.com/luscinius/afcluster

QCluster

Clustering of reads with alignment-free measures (k-mer based) and quality values

Software (C++)

http://www.dei.unipd.it/~ciompin/main/qcluster.html

Reads error correction

Lighter

Correction of sequencing errors in raw, whole genome sequencing reads (k-mer based)

Software (C++)

https://github.com/mourisl/Lighter

QuorUM

Error corrector for Illumina reads using k-mers

Software (C++)

https://github.com/gmarcais/Quorum

Trowel

Software (C++)

https://sourceforge.net/projects/trowel-ec/

Metagenomics

Assembly-free phylogenomics

AAF

Phylogeny reconstruction directly from unassembled raw sequence data from whole genome sequencing projects; provides bootstrap support to assess uncertainty in the tree topology (k-mer based)

Software (Python)

https://github.com/fanhuan/AAF

kSNP v3

Reference-free SNP identification and estimation of phylogenetic trees using SNPs (based on k-mer analysis)

Software (C)

https://sourceforge.net/projects/ksnp/files/

NGS-MC

Phylogeny of species based on NGS reads using alignment-free sequence dissimilarity measures d2* and d2 S under different Markov chain models (using k-words)

R package

http://www-rcf.usc.edu/~fsun/Programs/NGS-MC/NGS-MC.html

Species identification/taxonomic profiling

CLARK

Taxonomic classification of metagenomic reads to known bacterial genomes using k-mer search and LCA assignment

Software (C++)

http://clark.cs.ucr.edu/

FOCUS

Reports organisms present in metagenomic samples and profiles their abundances (uses composition-based approach and non-negative least squares for prediction)

Web service Software (Python)

http://edwards.sdsu.edu/FOCUS/

GSM

Estimation of abundances of microbial genomes in metagenomic samples (k-mer based)

Software (Go)

https://github.com/pdtrang/GSM

Mash

Species identification using assembled or unassembled Illumina, PacBio, and ONT data (based on MinHash dimensionality-reduction technique)

Software (C++)

https://github.com/marbl/mash

Kraken

Taxonomic assignment in metagenome analysis by exact k-mer search; LCA assignment of short reads based on a comprehensive sequence database

Software (C++)

https://ccb.jhu.edu/software/kraken/

LMAT

Assignment of taxonomic labels to reads by k-mers searches in precomputed database

Software (C++/Python)

https://sourceforge.net/projects/lmat/

stringMLST

k-mer-based tool for MLST directly from the genome sequencing reads

Software (Python)

http://jordan.biology.gatech.edu/page/software/stringMLST

Taxonomer

k-mer-based ultrafast metagenomics tool for assigning taxonomy to sequencing reads from clinical and environmental samples

Web service

http://taxonomer.iobio.io/

Other

d2-tools

Word-based (k-tuple) comparison (pairwise dissimilarity matrix using d2S measure) of metatranscriptomic samples from NGS reads

Software (Python/R)

https://code.google.com/p/d2-tools/

VirHostMatcher

Prediction of hosts from metagenomic viral sequences based on ONF using various distance measures (e.g., d2)

Software (C++)

https://github.com/jessieren/VirHostMatcher

MetaFast

Statistics calculation of metagenome sequences and the distances between them based on assembly using de Bruijn graphs and Bray–Curtis dissimilarity measure

Software (Java)

https://github.com/ctlab/metafast

NanoSim: nanopore sequence read simulator based on statistical characterization.

Jit — Mon, 18 Dec 2017 04:16:31 -0600

NanoSim, a fast and scalable read simulator that captures the technology-specific features of ONT data and allows for adjustments upon improvement of nanopore sequencing technology. The first step of NanoSim is read characterization, which provides a comprehensive alignment-based analysis and generates a set of read profiles serving as the input to the next step, the simulation stage. The simulation stage uses the model built in the previous step to produce in silico reads for a given reference genome. NanoSim is written in Python and R. The source files and manual are available at the Genome Sciences Centre website: http://www.bcgsc.ca/platform/bioinfo/software/nanosim

https://github.com/bcgsc/NanoSim

Address of the bookmark: http://www.bcgsc.ca/platform/bioinfo/software/nanosim