In the mid 1960's scientists discovered that many genomes contain stretches of highly repetitive DNA sequences ( see Reassociation Kinetics Experiments, and C-Value Paradox ). These sequences were later characterized and placed into five categories:

Simple Repeats - Duplications of simple sets of DNA bases (typically 1-5bp) such as A, CA, CGG etc.
Tandem Repeats - Typically found at the centromeres and telomeres of chromosomes these are duplications of more complex 100-200 base sequences.
Segmental Duplications - Large blocks of 10-300 kilobases which are that have been copied to another region of the genome.
Interspersed Repeats
Processed Pseudogenes, Retrotranscripts, SINES - Non-functional copies of RNA genes which have been reintegrated into the genome with the assitance of a reverse transcriptase.
DNA Transposons
Retrovirus Retrotransposons
Non-Retrovirus Retrotransposons ( LINES )

Currently up to 50% of the human genome is repetitive in nature and as improvements are made in detection methods this number is expected to increase.

On the other hand; In genetics, the term palindrome refers to a sequence of nucleotides along a DNA (deoxyribonucleic acid) or RNA (ribonucleic acid) strand that contains the same series of nitrogenous bases regardless from which direction the strand is analyzed. Akin to a language palindrome—wherein a word or phrase is spelled the same left-to-right as right-to-left (e.g., the word RADAR or the phrase "able was I ere I saw elba")—with genetic palindromes it does not matter whether the nucleic acid strand is read starting from the 3' (three prime) end or the 5' (five prime) end of the strand.

Recent research on palindromes centers on understanding palindrome formation during gene amplification. Other studies have attempted to relate palindrome formation to molecular mechanisms involved in double stranded breaks and in the formation of inverted repeats. Assisted by high speed computers, other groups of scientists link palindrome formation to the conservation of genetic information.

Related to the direction of transcription by RNA polymerase, DNA strands have upstream and downstream terminus defined by differing chemical groups at each end. The ends of each strand of DNA or RNA are termed the 5' (phosphate bound to the 5' position carbon) and 3' (phosphate bound to the 3' carbon) ends to indicate a polarity within the molecule. Using the letters A, T, C, G, to represent the nitrogenous bases adenine, thymine, cytosine, and guanine found in DNA, and the letters A, U, C, G to represent the nitrogenous bases adenine, uracil, cytosine, guanine found in RNA (Note that uracil in RNA replaces the thymine found in DNA), geneticists usually represent DNA by a series of base codes (e.g., 5' AATCGGATTGCA 3'). The base codes are usually arranged from the 5' end to the 3' end.

Because of specific base pairing in DNA (i.e., adenine (A) always bonds with (thymine (T) and cytosine (C) always bonds with guanine (G)) the complimentary stand to the sequence 5' AATCGGATTGCA 3' would be 3' TTAGCCTAACGT 5'.

With palindromes the sequences on the complimentary strands read the same in either direction. For example, a sequence of 5' GAATTC3' on one strand would be complimented by a 3' CTTAAG 5' strand. In either case, when either strand is read from the 5' prime end the sequence is GAATTC. Another example of a palindrome would be the sequence 5' CGAAGC 3' that, when reversed, still reads CGAAGC.

Palindromes are important sequences within nucleic acids. Often they are the site of binding for specific enzymes (e.g., restriction endobucleases) designed to cut the DNA strands at specific locations (i.e., at palindromes).

Palindromes may arise from brakeage and chromosomal inversions that form inverted repeats that compliment each other. When a palindrome results from an inversion, it is often referred to as an inverted repeat. For example, the sequence 5' CGAAGC 3', if inverted (reversed 180°), still reads CGAAGC.

The European Molecular Biology Open Software Suite (EMBOSS) includes some basic tools for finding tandem repeats and inverted repeats (see B.6.22. Applications in group Nucleic:repeats). There are many on-line services providing the EMBOSS tools, for example:

• Wageningen Bioinformatics Webportal EMBOSS explorer
• Mobyle@Pasteur
• Soaplab2 Web Services at Vital-IT

For more sophisticated repeat finding you will want to look at tools using Repbase for example:

• CENSOR
  • CENSOR@GIRI
  • CENSOR@EMBL-EBI
• RepeatMasker
• MUMmer (scan_for_match)
• Emboss Palindrome

Other nucleotide repeat finding methods found by a couple of web searches:

• Tandem Repeats Finder
• RECON
• RepeatRunner
• REPuter
• Imperfect Microsatellite Extractor (IMEx)
• Spectral Repeat Finder (SRF)
• REPFIND
• CRISPRfinder
• GrailEXP
• CONREPP
• find_palindromes
• Palindrome
• EMBOSS Palindrome
• Palindrome Search

 UPARSE >
OTU clustering for 16S and other marker genes. Highly accurate OTU sequences and improved diversity measures. UCHIME >
Chimeric sequence detection. PILER >
De novo genome repeat finder. PILER-CR >
Detection of CRISPR repeats in bacterial genomes. QSCORE >
Compare two multiple alignments for benchmarking. PALS >
Whole-genome alignment. PREFAB >
Protein Reference Alignment Database. MSA benchmark collection >
Selected multiple alignment benchmarks in a standardized FASTA format.

Address of the bookmark: http://drive5.com/software.html

The MEME Suite allows the biologist to discover novel motifs in collections of unaligned nucleotide or protein sequences, and to perform a wide variety of other motif-based analyses.

The MEME Suite supports motif-based analysis of DNA, RNA and protein sequences. It provides motif discovery algorithms using both probabilistic (MEME) and discrete models (MEME), which have complementary strengths. It also allows discovery of motifs with arbitrary insertions and deletions (GLAM2). In addition to motif discovery, the MEME Suite provides tools for scanning sequences for matches to motifs (FIMO, MAST and GLAM2Scan), scanning for clusters of motifs (MCAST), comparing motifs to known motifs (Tomtom), finding preferred spacings between motifs (SpaMo), predicting the biological roles of motifs (GOMo), measuring the positional enrichment of sequences for known motifs (CentriMo), and analyzing ChIP-seq and other large datasets (MEME-ChIP).

The MEME Suite is comprised of a collection of tools that work together, as shown below. Not all the tools are available as webservices, so to get the full power of the MEME Suite you will need to download and install a local copy of the software. To see what has changed recently you can peruse the release notes.

http://meme-suite.org/

Address of the bookmark: http://meme-suite.org/

TMAP is a fast and accurate alignment software for short and long nucleotide sequences produced by next-generation sequencing technologies.

• The latest TMAP is unsupported. To use a supported version, please see the TMAP version associated with a Torrent Suite release below.

• Get the latest source code:

  git clone git://github.com/iontorrent/TMAP.git
   cd TMAP
   git submodule init
   git submodule update

https://github.com/iontorrent/TS/tree/master/Analysis/TMAP

Address of the bookmark: https://github.com/iontorrent/TS/tree/master/Analysis/TMAP

Study of 10 tools on five datasets that such a comparative evaluation of these tools is hindered by two types of circularity: they arise due to (1) the same variants or (2) different variants from the same protein occurring both in the datasets used for training and for evaluation of these tools, which may lead to overly optimistic results. Comparative evaluations of predictors that do not address these types of circularity may erroneously conclude that circularity confounded tools are most accurate among all tools, and may even outperform optimized combinations of tools.

Following tools are useful for mis sense muation detection ... 

PolyPhen‐2 (PP2)
“Predicts possible impact of an amino acid substitution on the structure and function of a human protein using straightforward physical and comparative considerations”

MutationTaster‐2 (MT2)
“Evaluation of the disease‐causing potential of DNA sequence alterations”

MutationAssessor (MASS)
“Predicts the functional impact of amino acid substitutions in proteins, such as mutations discovered in cancer or missense polymorphisms”

LRT
“Identify a subset of deleterious mutations that disrupt highly conserved amino acids within protein‐coding sequences, which are likely to be unconditionally deleterious”

SIFT
“Predicts whether an amino acid substitution affects protein function”

GERP++
“Identifies constrained elements in multiple alignments by quantifying substitution deficits. These deficits represent substitutions that would have occurred if the element were neutral DNA, but did not occur because the element has been under functional constraint. We refer to these deficits as “rejected substitutions.” Rejected substitutions are a natural measure of constraint that reflects the strength of past purifying selection on the element”

phyloP
“Compute conservation or acceleration P values based on an alignment and a model of neutral evolution”

FatHMM unweighted (FatHMM‐U)
Predicts “functional consequences of both coding variants, that is, nonsynonymous single‐nucleotide variants, and noncoding variants”

FatHMM weighted (FatHMM‐W)
Predicts “functional consequences of both coding variants, that is, nonsynonymous single‐nucleotide variants, and noncoding variants” and its weighting scheme attributes higher tolerance scores to SNVs in proteins, related proteins, or domains that already include a high fraction of pathogenic variantsh

Combined Annotation Dependent Depletion (CADD)
“CADD is a tool for scoring the deleteriousness of single‐nucleotide variants as well as insertion/deletions variants in the human genome”

3D-Dock Suite

Global rigid search: FFTShape complementarity and electrostatics

Re-scoring and clustering. Refinement of interface side-chains

3D-Garden

Global rigid search in ensamble

Shape complementarity and Lennard–Jones potential

Side chain and backbone dihedral refinement

DOT

Global rigid search: FFTShape complementarity, electrostatics and VDWNone

Escher NG

Global rigid searchShape complementarity, hydrogen bonds and electrostatic

Integrated in VEGA

GRAMM 

Global rigid search: FFT. smooth protein surface representation for soft docking

Shape complementarity and Lennard-Jones potential

Clustering of conformations

GRAMM-X 

Global rigid search: FFT. smooth protein surface representation for soft docking

Shape complementarity and Lennard-Jones potentialminimization and re-scoring with multiple filters

HEX

Global rigid search: Fourier correlation of spherical harmonics

Shape complementarity

HADDOCK

Global rigid searchElectrostatic ,VDW and desolvation energy termsMD simulated annealing refinement . Filtering based on external data. 

ICM

Global rigid search: Monte CarloEmpirical scoring function

Clustering and selection of conformations. Refinement of interface side-chains and re-scoring

MolFit 

Global rigid search: FFTShape complementarity

Clustering of good solutions, filtering using a priori information and small, local rigid rotations around selected conformations

PatchDock

Global rigid searchShape complementarity and atomic desolvation energy

Clustering of conformations

PyDock

Global rigid search:FFTShape complementarity

rescoring by binding electrostatics and desolvation energy

RosettaDock

Local rigid search: Monte Carlo with low and high resolution structure representation levels

Different scoring parameters for the different resolutions 

ZDOCK

Global rigid search: FFTShape complementarity, desolvation energy, and electrostatics.

Energy minimization and re-scoringFree for academics

Point to note:

The proper treatment of flexibility in protein–protein docking is still an active field of research. You first should analyzed your proteins in order to define their conformational space and then choose the most suitable method for your docking problem.

Download 

http://arthropods.eugenes.org/EvidentialGene/trassembly.html

https://sourceforge.net/p/evidentialgene/blog/

Address of the bookmark: http://arthropods.eugenes.org/EvidentialGene/trassembly.html

The mmgenome R package also facilitates effortless integration with additional data sources and hence should not be seen as "yet another binning method", but rather a package to integrate different binning strategies.

All functions in the mmgenome R package has associated documentation, check it out in R by e.g. ?mmplot.

Address of the bookmark: https://github.com/MadsAlbertsen/mmgenome

Compare structural and functional annotations of proteins between sequenced genomes.

1. MISA: MISA (MIcroSAtellite) is a web-based tool that can identify SSRs in DNA sequences. It can be used to analyze nucleotide sequences from various organisms and can identify perfect, compound, and imperfect SSRs.

2. SSR Locator: SSR Locator is a web-based tool that identifies SSRs in both DNA and RNA sequences. It can identify perfect, compound, and imperfect SSRs, and can also filter out low complexity regions.

3. SciRoKo: SciRoKo is a software tool that can identify SSRs in DNA sequences. It can be used to analyze genomic and transcriptomic sequences from various organisms and can identify perfect, compound, and imperfect SSRs.

4. Primer3: Primer3 is a web-based tool that designs PCR primers for SSRs. It can design primers for perfect and imperfect SSRs, and can be used to design primers for SSRs in various organisms.

5. QDD: QDD (Quick Detection of Duplication) is a software tool that can identify SSRs in DNA sequences and can also identify duplicate loci. It can be used to analyze genomic and transcriptomic sequences from various organisms.

These are just a few examples of the many bioinformatics tools available for exploring SSRs. Depending on your specific needs and research questions, you may find that other tools are more appropriate for your analysis.