• Binaries for Linux/macOS
• From sources for Linux/macOS
• From sources for Windows

Address of the bookmark: https://github.com/imgag/ngs-bits

During the first phase of ENCODE, published in 2007, microarray-based technologies were used to detect regions associated with transcription factors, certain histone modifications and open chromatin within a pre-specified 1% of the human genome.

ENCODE’s second phase saw a switch to sequencing-based technologies, the addition of new assay types and the analysis of functional elements genome-wide, described in a collection of research articles in 2012.

The Encyclopedia paper of ENCODE 3, published in Nature, gives an overview of the various assays that were performed in human and mouse cell lines and tissues and describes a Registry of human and mouse candidate cis-regulatory elements (cCREs).

More at https://www.nature.com/immersive/d42859-020-00027-2/index.html

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

• Homology-based misassembly correction
• Homology-based assembly scaffolding and patching
• Scaffold merging

Address of the bookmark: https://github.com/malonge/RagTag

1. SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.

2. ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.

3. Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.

4. SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.

5. MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.

6. Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.

7. Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.

8. SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.

9. SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.

10. Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.

11. Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.

12. wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.

13. Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.

14. Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.

15. CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.

16. Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

Variant calling and/or genotyping

• DiscoSNP++ and discoSnpRAD: Reference-free small variant discovery (SNPs and indels)
• MindTheGap: Detection and assembly of large insertion variants
• TakeABreak: reference-free inversion discovery tool
• SVJedi: Structural Variant genotyper with long read data
• SVJedi-graph: Structural Variant genotyper with long read data using a variation graph

Sequence assembly

• MinYS: reference-guided genome assembly in metagenomics data
• MTG-link: local assembly tool for linked-read data
• Minia: De novo short read assembler
• de-novo pipeline: de-novo assembly pipeline (error correction / contigs / scaffolding) for genomes and meta-genomes
• Mapsembler2: Targeted assembly (not maintained)

Managing k-mers & indexation

• findere: simple strategy for speeding up queries and for reducing false positive calls from any Approximate Membership Query data structure.
  • fimpera extends findere adding the abundance information.
• kmtricks: modular tool suite for counting kmers, and constructing Bloom filters or kmer matrices, for large collections of sequencing data.
• kmindex is a tool for indexing and querying sequencing samples. It is built on top of kmtricks.
• back to sequences: Find sequences (reads, unitigs, genes) related to a set of kmers in large datasets, in a matter of seconds.
• Backpack Quotient Filter: k-mer indexing data structure with abundance
• short read connector: Detect similar reads from potentially large read set
• DSK: Count K-mer in sequences

Pangenome graph manipulation

• Pancat: Pangenome Comparison and Analysis Toolkit
• GFAGraphs: a Python library to handle pangenome graph files in GFA format.

Comparative metagenomics with k-mers

• Simka and SimkaMin: Comparative metagenomics for large-scale datasets
• Comparead & Commet: comparison of metagenomic datasets

Species and bacterial strains identification

• ORI: software using long nanopore reads to identify bacteria present in a sample at the strain level
• StrainFLAIR: STRAIN-level proFiLing using vArIation gRaph

General-purpose sequencing data manipulation

• GASSST: long read mapper
• Leon: short read compressor (now included in GATB-core)
• Bloocoo: short read corrector
• BCALM: Construct compacted de Bruijn graphs (unitigs)

 Protein Structure

• A_Purva: Contact Map Overlap solver
• MD-Jeep: Distance Geometry solver
• CSA: Comparative Structural Alignment

Workflow

• SLICEE: parallel execution of bioinformatics workflows

Comparative Genomics

• CASSIS: detection of rearrangement breakpoints
• PLAST: intensive bank-to-bank sequence comparison
• DRJBreakpointFinder: detection and precise localization of excision sites in proviral segments

Explore your trees directly in the browser, and annotate them with various types of data.

iTOL can easily visualize trees with 50'000 or more leaves. With advanced search capabilities and display of unrooted, circular and regular cladograms or phylograms, exploring and navigating trees of any size is simple.

https://itol.embl.de/

Address of the bookmark: https://itol.embl.de/

Description
This free online-only RevBayes workshop will provide an introduction to the theory and use of RevBayes, with a focus on (1) tree inference from molecular data, (2) analyses combining fossil and extant taxa, and (3) evaluating MCMC performance, with advanced topics including assessing model adequacy and macroevolutionary analyses. Additional topics may be added depending on the interests of selected participants. The format will be a combination of interactive video sessions (via Zoom or similar tools), real-time discussions over Slack, self-guided tutorials, and pre-recorded videos.

The initial session will resolve technical issues and present the basics of using RevBayes. Participants will then be expected to work through several tutorials on their own schedule, with the help of pre-recorded materials. A Slack forum will be open for questions and issues. The workshop will conclude with several online Q&A sessions with the instructors. The dates for the interactive sessions are currently tentative and may be adjusted depending on the schedules of the participants and instructors.

We are hoping to identify up to 15 participants for this online course. While we hope we are able to accommodate everyone who applies, we realize that this may not be possible because of time-zones and availability. If the number of applicants exceeds our capacity, we hope to organize a second round of sessions later in the year. Participants will not be charged for the course, but we will request that they commit to completing the tutorials and attending a majority of interactive sessions.

To apply to this course, please go to the registration form and submit your application by July 6, 2020.

More at https://revbayes.github.io/workshops/online2020.html

Address of the bookmark: http://ancestralgenomes.org/

Address of the bookmark: https://www.onezoom.org/