BOL: Related items

TelomereHunter

Jit — Fri, 02 Feb 2018 04:23:59 -0600

TelomereHunter is a tool for estimating telomere content from human whole-genome sequencing data. It is designed to take BAM files from a tumor and a matching control sample as input. However, it is also possible to run TelomereHunter with one input file. TelomereHunter extracts and sorts telomeric reads from the input sample(s). For the estimation of telomere content, GC biases are taken into account. Finally, the results of TelomereHunter are visualized in several diagrams.

TelomereHunter is available for download at the following address: https://pypi.python.org/pypi/telomerehunter/

Address of the bookmark: http://www.dkfz.de/en/applied-bioinformatics/telomerehunter/telomerehunter.html

HASLR: a tool for rapid genome assembly of long sequencing reads

LEGE — Fri, 31 Jan 2020 05:50:15 -0600

HASLR is a tool for rapid genome assembly of long sequencing reads. HASLR is a hybrid tool which means it requires long reads generated by Third Generation Sequencing technologies (such as PacBio or Oxford Nanopore) together with Next Generation Sequencing reads (such as Illumina) from the same sample.

Address of the bookmark: https://github.com/vpc-ccg/haslr

COPE: an accurate k-mer-based pair-end reads connection tool to facilitate genome assembly

Jit — Wed, 06 Dec 2017 02:08:14 -0600

An efficient tool called Connecting Overlapped Pair-End (COPE) reads, to connect overlapping pair-end reads using k-mer frequencies. We evaluated our tool on 30× simulated pair-end reads from Arabidopsis thaliana with 1% base error. COPE connected over 99% of reads with 98.8% accuracy, which is, respectively, 10 and 2% higher than the recently published tool FLASH. When COPE is applied to real reads for genome assembly, the resulting contigs are found to have fewer errors and give a 14-fold improvement in the N50 measurement when compared with the contigs produced using unconnected reads.

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

Rahul Nayak — Sat, 06 Jul 2019 03:48:22 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye

DADA2: Fast and accurate sample inference from amplicon data with single-nucleotide resolution

Jit — Tue, 10 Nov 2020 20:26:00 -0600

The DADA2 tutorial goes through a typical workflow for paired end Illumina Miseq data: raw amplicon sequencing data is processed into the table of exact amplicon sequence variants (ASVs) present in each sample.

The DADA2 Workflow on Big Data goes through workflow optimized to run on large datasets (10s of millions to billions of reads).

An ITS-specific version of the DADA2 workflow identifies and verifiably removes primers on both ends of each ITS read, a key step due to the variable length of the ITS region.

Short demonstrations of assigning taxonomy and assigning species to sequences.

Address of the bookmark: https://benjjneb.github.io/dada2/index.html

HiTE: a fast and accurate dynamic boundary adjustment approach for full-length Transposable Elements detection and annotation in Genome Assemblies

LEGE — Sat, 20 Sep 2025 09:34:04 -0500

HiTE is a Python software that uses a dynamic boundary adjustment approach to detect and annotate full-length Transposable Elements in Genome Assemblies. In comparison to other tools, HiTE demonstrates superior performance in detecting a greater number of full-length TEs.

panHiTE

We have developed panHiTE, a comprehensive and accurate pipeline for TE detection in large-scale population genomes. It has been successfully applied to hundreds of plant population genomes, demonstrating its effectiveness and scalability.

For detailed instructions, please refer to the panHiTE tutorial.

Address of the bookmark: https://github.com/CSU-KangHu/HiTE

NanoPack: visualizing and processing long-read sequencing data

Jit — Fri, 10 Aug 2018 18:41:34 -0500

The NanoPack tools are written in Python3 and released under the GNU GPL3.0 License. The source code can be found at https://github.com/wdecoster/nanopack, together with links to separate scripts and their documentation. The scripts are compatible with Linux, Mac OS and the MS Windows 10 subsystem for Linux and are available as a graphical user interface, a web service at http://nanoplot.bioinf.be and command line tools.

https://academic.oup.com/bioinformatics/article/34/15/2666/4934939

Address of the bookmark: https://github.com/wdecoster/nanoQC

Libraries or management tools for high throughput sequencing data

LEGE — Fri, 04 Oct 2024 02:45:06 -0500

GATB Library. The Genome Analysis Toolbox with de-Bruijn graph. A large part of tools developed by the GenScale team are based on this library.
These methods enable the analysis of data sets of any size on multi-core desktop computers, including very huge amount of reads data coming from any kind of organisms such as bacteria, plants, animals and even complex samples (e.g. metagenomes). Among them are (the full is available here: https://gatb.inria.fr/software/):
LRez: C++ Library and toolkit for the barcode-based management and indexation of linked-read datasets.

Variant calling and/or genotyping

DiscoSNP++ and discoSnpRAD: Reference-free small variant discovery (SNPs and indels)
MindTheGap: Detection and assembly of large insertion variants
TakeABreak: reference-free inversion discovery tool
SVJedi: Structural Variant genotyper with long read data
SVJedi-graph: Structural Variant genotyper with long read data using a variation graph

Sequence assembly

MinYS: reference-guided genome assembly in metagenomics data
MTG-link: local assembly tool for linked-read data
Minia: De novo short read assembler
de-novo pipeline: de-novo assembly pipeline (error correction / contigs / scaffolding) for genomes and meta-genomes
Mapsembler2: Targeted assembly (not maintained)

Managing k-mers & indexation

findere: simple strategy for speeding up queries and for reducing false positive calls from any Approximate Membership Query data structure.
- fimpera extends findere adding the abundance information.
kmtricks: modular tool suite for counting kmers, and constructing Bloom filters or kmer matrices, for large collections of sequencing data.
kmindex is a tool for indexing and querying sequencing samples. It is built on top of kmtricks.
back to sequences: Find sequences (reads, unitigs, genes) related to a set of kmers in large datasets, in a matter of seconds.
Backpack Quotient Filter: k-mer indexing data structure with abundance
short read connector: Detect similar reads from potentially large read set
DSK: Count K-mer in sequences

Pangenome graph manipulation

Pancat: Pangenome Comparison and Analysis Toolkit
GFAGraphs: a Python library to handle pangenome graph files in GFA format.

Comparative metagenomics with k-mers

Simka and SimkaMin: Comparative metagenomics for large-scale datasets
Comparead & Commet: comparison of metagenomic datasets

Species and bacterial strains identification

ORI: software using long nanopore reads to identify bacteria present in a sample at the strain level
StrainFLAIR: STRAIN-level proFiLing using vArIation gRaph

General-purpose sequencing data manipulation

GASSST: long read mapper
Leon: short read compressor (now included in GATB-core)
Bloocoo: short read corrector
BCALM: Construct compacted de Bruijn graphs (unitigs)

Protein Structure

A_Purva: Contact Map Overlap solver
MD-Jeep: Distance Geometry solver
CSA: Comparative Structural Alignment

Workflow

SLICEE: parallel execution of bioinformatics workflows

Comparative Genomics

CASSIS: detection of rearrangement breakpoints
PLAST: intensive bank-to-bank sequence comparison
DRJBreakpointFinder: detection and precise localization of excision sites in proviral segments

Manta: rapid detection of structural variants and indels for germline and cancer sequencing applications.

Jit — Mon, 28 May 2018 09:41:39 -0500

Manta calls structural variants (SVs) and indels from mapped paired-end sequencing reads. It is optimized for analysis of germline variation in small sets of individuals and somatic variation in tumor/normal sample pairs. Manta discovers, assembles and scores large-scale SVs, medium-sized indels and large insertions within a single efficient workflow.

Address of the bookmark: https://github.com/Illumina/manta

GeneProf: analysis of high-throughput sequencing experiment

Jit — Wed, 05 Jul 2017 16:47:05 -0500

GeneProf is a web-based, graphical software suite that allows users to analyse data produced using high-throughput sequencing platforms (RNA-seq and ChIP-seq; "Next-Generation Sequencing" or NGS): Next-gen analysis for next-gen data!

Some of GeneProf's highlights include:

Easy-to-use web-based interface:Access your data at any time from any computer with a working internet connection -- no need to install software! (cp. Section 'System Requirements').
Analysis wizards make your life easy:Step-by-step workflows make it easy to analyse high-throughput data within a minimum of hands-on time. (cp. SubConcept 'Analysis Wizards').
Versatile modules:Advanced users and data analysis experts benefit from GeneProf's broad range of analysis modules, which can be combined freely into sophisticated workflows (cp. Concept 'Workflows').
Integrated Analysis:Analysis of ChIP-seq and RNA-seq data in one place, plus support for the integration of other external data (e.g. from microarrays).
Comprehensive Resource:GeneProf provides a comprehensive resource of fully analyzed next-generation sequencing data. Experimental results can be easily accessed and compared and the analysis procedures employed to produce the data are fully transparent (cp. Tutorial 'Examining Public Next-Gen Data..').
Extensibility:Algorithm developers and computer programmers can develop their own modules and extend GeneProf. Existing software can be easily wrapped in the workflow framework (cp. Section 'Module Development: Adding new..') and data from GeneProf may be used externally (cp. Section 'Web API: Retrieving Data from ..').

GeneProf is academic software developed at the Centre for Regenerative Medicine / Institute for Stem Cell Research, University of Edinburgh and has benefited from funding by the Medical Research Council and the EU Framework 7 Project "EuroSyStem".

Address of the bookmark: https://www.geneprof.org/GeneProf/index.jsp