BOL: Related items

Alignment-free sequence comparison tools available for next-generation sequencing data analysis

Abhimanyu Singh — Tue, 07 Nov 2017 05:33:33 -0600

kallisto

Transcript abundance quantification from RNA-seq data (uses pseudoalignment for rapid determination of read compatibility with targets)

Software (C++)

https://pachterlab.github.io/kallisto/

Sailfish

Estimation of isoform abundances from reference sequences and RNA-seq data (k-mer based)

Software (C++)

http://www.cs.cmu.edu/~ckingsf/software/sailfish/

Salmon

Quantification of the expression of transcripts using RNA-seq data (uses k-mers)

https://combine-lab.github.io/salmon/

RNA-Skim

RNA-seq quantification at transcript-level (partitions the transcriptome into disjoint transcript clusters; uses sig-mers, a special type of k-mers)

Software (C++)

http://www.csbio.unc.edu/rs/

Variant calling

ChimeRScope

Fusion transcript prediction using gene k-mers profiles of the RNA-seq paired-end reads

Software (Java)

https://github.com/ChimeRScope/ChimeRScope/wiki

FastGT

Genotyping of known SNV/SNP variants directly from raw NGS sequence reads by counting unique k-mers

Software (C)

https://github.com/bioinfo-ut/GenomeTester4/

Phy-Mer

Reference-independent mitochondrial haplogroup classifier from NGS data (k-mer based)

Software (Python)

https://github.com/danielnavarrogomez/phy-mer

LAVA

Genotyping of known SNPs (dbSNP and Affymetrix's Genome-Wide Human SNP Array) from raw NGS reads (k-mer based)

Software (C)

http://lava.csail.mit.edu/

MICADo

Detection of mutations in targeted third-generation NGS data (can distinguish patients’ specific mutations; algorithm uses k-mers and is based on colored de Bruijn graphs)

Software (Python)

http://github.com/cbib/MICADo

General mapper

Minimap

Lightweight and fast read mapper and read overlap detector (uses the concept of “minimazers”, a special type of k-mers)

Software (C)

https://github.com/lh3/minimap

Assembly

De novo genome assembly

MHAP

Produces highly continuous assembly (fully resolved chromosome arms) from third-generation long and noisy reads (10 kbp) using a dimensionality reduction technique MinHash

Software (Java)

https://github.com/marbl/MHAP

Miniasm

Assembler of long noisy reads (SMRT, ONT) using the Overlap-Layout Consensus (OLC) approach without the necessity of an error correction stage (uses minimap)

Software (C)

https://github.com/lh3/miniasm

LINKS

Scaffolding genome assembly with error-containing long sequence (e.g., ONT or PacBio reads, draft genomes)

Software (Perl)

https://github.com/warrenlr/LINKS/

Read clustering

afcluster

Clustering of reads from different genes and different species based on k-mer counts

Software (C++)

https://github.com/luscinius/afcluster

QCluster

Clustering of reads with alignment-free measures (k-mer based) and quality values

Software (C++)

http://www.dei.unipd.it/~ciompin/main/qcluster.html

Reads error correction

Lighter

Correction of sequencing errors in raw, whole genome sequencing reads (k-mer based)

Software (C++)

https://github.com/mourisl/Lighter

QuorUM

Error corrector for Illumina reads using k-mers

Software (C++)

https://github.com/gmarcais/Quorum

Trowel

Software (C++)

https://sourceforge.net/projects/trowel-ec/

Metagenomics

Assembly-free phylogenomics

AAF

Phylogeny reconstruction directly from unassembled raw sequence data from whole genome sequencing projects; provides bootstrap support to assess uncertainty in the tree topology (k-mer based)

Software (Python)

https://github.com/fanhuan/AAF

kSNP v3

Reference-free SNP identification and estimation of phylogenetic trees using SNPs (based on k-mer analysis)

Software (C)

https://sourceforge.net/projects/ksnp/files/

NGS-MC

Phylogeny of species based on NGS reads using alignment-free sequence dissimilarity measures d2* and d2 S under different Markov chain models (using k-words)

R package

http://www-rcf.usc.edu/~fsun/Programs/NGS-MC/NGS-MC.html

Species identification/taxonomic profiling

CLARK

Taxonomic classification of metagenomic reads to known bacterial genomes using k-mer search and LCA assignment

Software (C++)

http://clark.cs.ucr.edu/

FOCUS

Reports organisms present in metagenomic samples and profiles their abundances (uses composition-based approach and non-negative least squares for prediction)

Web service Software (Python)

http://edwards.sdsu.edu/FOCUS/

GSM

Estimation of abundances of microbial genomes in metagenomic samples (k-mer based)

Software (Go)

https://github.com/pdtrang/GSM

Mash

Species identification using assembled or unassembled Illumina, PacBio, and ONT data (based on MinHash dimensionality-reduction technique)

Software (C++)

https://github.com/marbl/mash

Kraken

Taxonomic assignment in metagenome analysis by exact k-mer search; LCA assignment of short reads based on a comprehensive sequence database

Software (C++)

https://ccb.jhu.edu/software/kraken/

LMAT

Assignment of taxonomic labels to reads by k-mers searches in precomputed database

Software (C++/Python)

https://sourceforge.net/projects/lmat/

stringMLST

k-mer-based tool for MLST directly from the genome sequencing reads

Software (Python)

http://jordan.biology.gatech.edu/page/software/stringMLST

Taxonomer

k-mer-based ultrafast metagenomics tool for assigning taxonomy to sequencing reads from clinical and environmental samples

Web service

http://taxonomer.iobio.io/

Other

d2-tools

Word-based (k-tuple) comparison (pairwise dissimilarity matrix using d2S measure) of metatranscriptomic samples from NGS reads

Software (Python/R)

https://code.google.com/p/d2-tools/

VirHostMatcher

Prediction of hosts from metagenomic viral sequences based on ONF using various distance measures (e.g., d2)

Software (C++)

https://github.com/jessieren/VirHostMatcher

MetaFast

Statistics calculation of metagenome sequences and the distances between them based on assembly using de Bruijn graphs and Bray–Curtis dissimilarity measure

Software (Java)

https://github.com/ctlab/metafast

Arvados

Martin Jones — Sat, 20 Sep 2014 16:54:21 -0500

Arvados is a free and open source bioinformatics platform for genomic and biomedical data. User can Store | Organize | Compute | Share the data for free.

Address of the bookmark: https://arvados.org/

List of visualization tools for genome alignments

Rahul Nayak — Fri, 02 Feb 2018 13:25:33 -0600

Genome browsers are useful not only for showing final results but also for improving analysis protocols, testing data quality, and generating result drafts. Its integration in analysis pipelines allows the optimization of parameters, which leads to better results. But sometime, we need publication ready figure of genomes. Following are the list of genome alignment visualization tools, which could be useful for analysis and interpretation of results:

ABySS Explorer

Interactive Java application that uses a novel graph-based representation to display a sequence assembly and associated metadata

http://www.bcgsc.ca/platform/bioinfo/software/abyss-explorer

BamView

Genome browser and annotation tool that allows visualization of sequence features, next-generation sequencing (NGS) data and the results of analyses within the context of the sequence, and also its six-frame translation

http://www.sanger.ac.uk/resources/software/artemis/

DNannotator

Annotation web toolkit for regional genomic sequences

http://bioapp.psych.uic.edu/DNannotator.htm

JVM

Java Visual Mapping tool for NGS reads

http://www.springer.com/cda/content/document/cda_downloaddocument/9789401792448-c2.pdf?SGWID=0-0-45-1487072-p176815501

LookSeq

Web-based visualization of sequences derived from multiple sequencing technologies. Low- or high-depth read pileups and easy visualization of putative single nucleotide and structural variation

http://lookseq.sourceforge.net

MagicViewer

Visualization of short read alignment, identification of genetic variation and association with annotation information of a reference genome

http://bioinformatics.zj.cn/magicviewer/

MapView

Alignments of huge-scale single-end and pair-end short reads

http://omictools.com/mapview-s1367.html

MultiPipMaker

Computes alignments of similar regions in two DNA sequences. The resulting alignments are summarized with a ‘percent identity plot’ (pip)

http://pipmaker.bx.psu.edu/pipmaker/

PileLineGUI

Handling genome position files in NGS studies

http://sing.ei.uvigo.es/pileline/pilelinegui.html

SAMtools tview

Simple and fast text alignment viewer; NGS compatible

http://www.htslib.org/

SEWAL

Uses a locality-sensitive hashing algorithm to enumerate all unique sequences in an entire Illumina sequencing run

http://www.sourceforge.net/projects/sewal

STAR

A web-based integrated solution to management and visualization of sequencing data

http://wanglab.ucsd.edu/star/browser

SVA

Software for annotating and visualizing sequenced human genomes

http://www.svaproject.org

Viewer (IGV)

Visualization of large heterogeneous datasets, providing a smooth and intuitive user experience at all levels of genome resolution

https://www.broadinstitute.org/igv/

ZOOM Lite

NGS data mapping and visualization software

http://bioinfor.com/zoom/lite/

PostDoc Scientist Bioinformatics at CCMB

Fri, 26 Sep 2014 19:58:41 -0500

1. Project Assistant/Junior Research Fellow/ Project Fellow [PA_JRF_PF]

a) M.Sc/or equivalent in biological sciences/related areas [Position Code: PA_JRF_PF_a]
b) B.E/B.Tech/ M.Sc in biotechnology/bioinformatics/computer science/Chemistry/Physics or MCA [Position Code: PA_JRF_PF_b]
c) M.Sc/or equivalent in wildlife sciences/ecology/environmental sciences or MBBS/BVSc/MVSc. [Position Code: PA_JRF_PF_c]

(Candidates with result awaited are NOT eligible to apply)

Upper Age limit 28years

Rs.12000 / Rs.16000 (as sanctioned by the funding agency)

2. Post Doctoral Fellow/Research Associate in multiple research areas [PDF_RA]

Ph.D. (submitted/awarded) in any branch of biological Sciences. Candidates with Ph.D. in other sciences are also encouraged to apply.

Experience in molecular biology, biochemistry, structural biology, cell biology, infectious disease, conservation genetics, veterinary science, reproductive biology, and molecular diagnostics is desired but not mandatory.

[Position Code: PDF_RA]

UpperAge limit 35years

Rs. 22000- 26000 (as sanctioned by the funding agency)

3. Post Doctoral Scientist Fellow [PDSF]

Ph.D in any of the following areas: bioinformatics, next generation sequencing, high throughput data analysis, proteomics, bio-statistics, computer science, information technology, computer hardware and networking/clustering, parallel processing.
[Position Code: PDSF]

Upper Age limit 40 years

Rs. 40000 consolidated (as sanctioned by the funding agency)

Download Application: Last date for apply online: 09th Oct 2014

Advertisement: www.ccmb.res.in//index.php?view=notifications&mid=0&id=71&nid=38

Apply online http://www.ccmb.res.in/positions/temp_notif/online_form.html

More at http://www.ccmb.res.in//index.php?view=notifications&mid=0&id=71&nid=38

Gap filling or Contigs extensions tools !

Rahul Nayak — Fri, 01 Jun 2018 08:07:32 -0500

There are many tools to perform gap filling using Illumina short reads, for example "GapFiller: a de novo assembly approach to fill the gap within paired reads" or "Toward almost closed genomes with GapFiller". There are also some tools like GAPresolution that can help to perform local re-assemblies using 454 reads. We used GAPresolution but it is not a very good software, it is useful only in some specific situations.

Take a look at the PRICE software from the DeRisi lab. Its meant to do something very similar. http://derisilab.ucsf.edu/index.php?page=software

You could also look at SSPACE (http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/sspacev12/), ATLAS tools (http://www.hgsc.bcm.tmc.edu/content/bcm-hgsc-software), and SCARPA (http://compbio.cs.toronto.edu/hapsembler/scarpa.html).

See the PAGIT protocol: http://www.sanger.ac.uk/resources/software/pagit/

In particular, take a look at the IMAGE tool: http://genomebiology.com/2010/11/4/R41

Also SOAPdenovo has ha function for scaffolding. Not sure about ABYSS

Here there is a useful explanation of several tools.

https://bioinformaticsonline.com/search?q=scaffolding&entity_type=object&entity_subtype=bookmarks&offset=0&search_type=entities

I could be wrong, but the above answers to your hypothetical scenario appear to miss the point that you aren't interested in assembling the full genome, just the 100 kb part you're interested in. I suggest the following algorithm:

1. Start with the initial assembly C0 of the contigs you have identified as overlapping your region of interest, and the set S of reads those contigs contain. Let C = C0.

2. Repeat:
a. Identify paired-end reads (not in C) for which one or both ends align within, or extending, contigs in C.
b. Identify unpaired reads that align extending these new paired-end reads.
c. Construct a new assembly C' from C and the new reads identified in (a) and (b).
d. Trim C' so it does not extend more than 100 kb to either end of C0. Set C = C'.
e. Let S' denote the reads that contribute to C'. If S' does not contain any reads not present in S, stop. Otherwise, Set S = S'.

3. If you don't have a complete assembly of the region of interest, generate an STS for each end of each contig, probe a library for clones including these STSes, subclone these clones into a paired-end sequencing vector, and generate paired-end reads for this library; then try steps (1) and (2) again, adding these new sequencing reads to what you had before.

4. If your average sequencing depth for the region of interest exceeds 25 or so without filling all gaps, it is likely that the remaining gaps represent sequences that are not getting cloned in your sequencing vectors. Try different sequencing vectors.

ArrayGen Bioinformatics Genomics Group

Sun, 28 Sep 2014 14:09:55 -0500

ArrayGen is a global bioinformatics company which is a one stop solution for microarray designing and genomics data analysis. Our novel Array Design Approach Strategy (ADAS) aims to condense the time lag between demands of scientific community and manufacture industry, thereby expediting research processes.

ArrayGen specializes in Genomics data analysis and research, as we believe in the level of precision, predictability, benchmark-ability, and data analysis capability of genomics data over other forms of biological data. ArrayGen constantly strives to develop new solutions, and plug the existing gaps in the technological advancement of the field.

More http://www.arraygen.com/

List of tools frequently used while genome assembly

BioStar — Tue, 22 Jan 2019 09:39:02 -0600

List of tools frequently used while genome assembly:

I have used the following assemblers

Spades (v. 3.10.1)
CANU (v. 1.6)
Unicycler (v. v0.4.1)
Miniasm (v. 0.2-r137-dirty)

I have used the following mappers

minimap2 (v. 2.0rc1-r232)
minimap (v. 0.2-r124-dirty)
bwa (v. 0.7.12-r1039)

I have used the following polishing tools

Racon (v. not available)
Pilon (v. 1.18)
Nanopolish (v. 0.8.3)

I have used the following tools to assess genome assembly characteristics

ANI.pl (https://github.com/chjp/ANI)
CheckM (v. 1.0.7)
Prokka (v. 1.12)
QUAST (v. 2.3)
mummer (v. not available)

If you have any ideas or superior tools we have missed please let us know in the comments.

Postdoc position in protein annotation and machine learning - Paris, France

Sat, 04 Oct 2014 08:10:45 -0500

We are interested in finding an excellent postdoc with interests in protein functional annotation, machine learning and computer grids. The position is open for 3.5 years at the Université Pierre et Marie Curie, in the heart of Paris.

Research topic: Protein function annotation, multiple probabilistic models, domain architecture, machine learning, combinatorial optimization, computer grid.

This project is run on the Laboratoire de Biologie Computationnelle et Quantitative UMR7238 CNRS-UPMC – Analytical Genomics team, headed by A.Carbone. It is co-advised with Pierre-Henri Wuillemin, Laboratoire d’Informatique de Paris 6 – Equipe DECISION.

The postdoc will be payed under a contract of Ingénieur de Recherche lasting 3.5 years and it is available from September 1st, 2014.

Group Web Page: http://www.lcqb.upmc.fr/AnalGenom/home.html

Ref. E-Mail: Alessandra Carbone alessandra.carbone@lip6.fr

wgd—simple command line tools for the analysis of ancient whole-genome duplications

LEGE — Thu, 23 Jul 2020 05:49:45 -0500

wgd is a easy to use command-line tool for K_S distribution construction named wgd. The wgd suite provides commonly used K_S and colinearity analysis workflows together with tools for modeling and visualization, rendering these analyses accessible to genomics researchers in a convenient manner.

https://academic.oup.com/bioinformatics/article/35/12/2153/5162749

Address of the bookmark: https://github.com/arzwa/wgd

JRF/SRF at Jawaharlal Nehru Institute ofAdvanced Studies (JNIAS), Hyderabad

Fri, 31 Oct 2014 08:48:23 -0500

Applications for Academic Projects in Biotechnology, Bioinformatics, Environmental Sciences and Computer Science & Engineering

About JNIAS
Jawaharlal Nehru Institute of Advanced Studies (JNIAS), Hyderabad has been established by Dr. D. Swaminadhan Research Foundation (DSRF), Hyderabad as a Research and Educational Institution with a view to contribute in developing advanced technologies and build „core competence‟ in specific areas. The activities of JNIAS involves: Education, Research Training and Innovations in the fields of Sciences, Technologies, Humanities and Social Sciences. It aims to blossom into an Advanced Institute of education and research with a reservoir of expertise and experience in the relevant fields and the necessary capability to harness multi-disciplinary research and studies. JNIAS has been recognized as an Advanced Research Institute by Jawaharlal Nehru Technological University Hyderabad (JNTUH), Hyderabad and Jawaharlal Nehru Technological University Anantapur (JNTUA), for offering Ph.D., P.G M.Phil, P.G Diploma and Training Programmes in Sciences and Engineering & Technology.

Jawaharlal Nehru Architecture and Fine Arts University (JNAFAU) Hyderabad also recognized JNIAS for offering UG, PG degree in Architecture.

Projects & Facilities

JNIAS offers wide range of projects:

Biotechnology area:

Molecular Biology
Microbiology
Nanotechnology
Bioinformatics (Schrodinger Software)
In Silico studies & Drug Designing
Sequence analysis
Protein structure function studies

Registration
Tuition Fees: Interested students need to pay the following tuition fees:
1. Six Month’s Project: Rs. 20,000/-
2. Four Month’s Project: Rs. 15,000/-
3. Three Month’s Project: Rs. 10,000/-
4. One Month - Hands on Training : Rs. 8,000/-

For enquires call:
91-7893203414 (Biotechnology), 91-9949582263 (Environmental Sciences) 91-8977369305 (Computer Science)

Interested student may download the application from the website (www.jnias.in) and send the hard copy of the completed application forms and Curriculum Vitae along with the Demand Draft drawn on any nationalized Banks in favor of “The Registrar, JNIAS, Secunderabad”. Application forms can be sent through email to academicprojects@jnias.in

Address
Jawaharlal Nehru Institute of Advanced Studies (JNIAS)
6th Floor, Buddha Bhavan, M.G Road,
Secunderabad - 500 003
Andhra Pradesh, India
Tele/Fax: 040- 27541551; 27541553
Mobile: 08885541554
Web site: www.jnias.in

Brochure : https://drive.google.com/file/d/0B3zPwhgA-u-nU0dyMFd2OWcxNUpSTWNYc0xDSGs5UDI4UDNB/view?usp=sharing