BOL: Related items

Next generation sequencing in R or bioconductor environment

John Parker — Mon, 02 Jun 2014 18:03:09 -0500

There are many R software and bioconductor packages for NGS data analysis, some of them are as follows

Biostrings

The Biostrings package from Bioconductor provides an advanced environment for efficient sequence management and analysis in R. It contains many speed and memory effective string containers, string matching algorithms, and other utilities, for fast manipulation of large sets of biological sequences. The objects and functions provided by Biostrings form the basis for many other sequence analysis packages. Documentation

IRanges Overview

IRanges provides the low-level infrastructure and containers for handling sets of integer ranges within Bioconductor's BioC-Seq domain. Its classes and methods provide support for many more high-level packages like GenomicRanges, ShortRead, Rsamtools, etc. Documentation

GenomicRanges Overview

The GenomicRanges package serves as the foundation for representing genomic locations within the Bioconductor project. It is built upon the IRanges infrastructure and defines three major data containers - GRanges, GRangesList and GappedAlignments - which are supporting other important BioC-Seq packages including ShortRead, Rsamtools, rtracklayer, GenomicFeatures and BSgenome. Compared to the IRanges container, the GRanges/GRangesList classes are more flexible and extensible to store additional information about sequence ranges, such as chromosome identifiers (sequence space), strand information and annotation data. Documentation

Motif Discovery

cosmo

The cosmo package allows to search a set of unaligned DNA sequences for a shared motif that may function as transcription factor binding site. The algorithm extends the popular motif discovery tool MEME (Bailey and Elkan, 1995) in that it allows the search to be supervised by specifying a set of constraints that the motif to be discovered must satisfy. Documentation

BCRANK

BCRANK is a method that takes a ranked list of genomic regions as input and outputs short DNA sequences that are overrepresented in some part of the list. The algorithm was developed for detecting transcription factor (TF) binding sites in a large number of enriched regions from high-throughput ChIP-chip or ChIP-seq experiments, but it can be applied to any ranked list of DNA sequences. Documentation

rGADEM: Documentation

MotIV: Documentation

ShortRead

The ShortRead package provides input, quality control, filtering, parsing, and manipulation functionality for short read sequences produced by high throughput sequencing technologies. While support is provided for many sequencing technologies, this package is primairly focused on Solexa/Illumina reads. Documentation

Rsamtools

Rsamtools provides functions for parsing and inspecting samtools BAM formatted binary alignment data. SAM/BAM is quickly becoming a universal standard alignment format, and is now supported by a wide variety of alignment tools. Documentation

Samtools Website
BWA (Burrows-Wheeler Alignment) Website

Additional tools for SNP analysis:

snpMatrix

BSgenome

BSgenome provides an object oriented infrastructure for interacting with a Biostring based genome sequence. BSgenome packages exist for many common genomes, and can be created to represent custom genomes. See the "How to forge a BSgenome data package" Vignette for instructions to create a new BSgenome package if a prebuilt package does not exist for your organism. Documentation

rtracklayer

rtracklayer provides an interface for exporting annotation feature data to various genome browsers and file formats (such as GFF). See the Small RNA Profiling exercise for an example of using rtracklayer to visualize alignment coverage. Documentation

biomaRt

The biomaRt package, provides an interface to a growing collection of databases implementing the BioMart software suite (http:// www.biomart.org). The package enables online retrieval of large amounts of data in a uniform way without the need to know the underlying database schemas. This data is retrieved automatically via the Internet, so it's recommended that you cache the data locally, or check versions if your code will be adversely affected by updates to these data. Documentation

ChIP-Seq Analysis Packages

Bioconductor provides various packages for analyzing and visualizing ChIP-Seq data. Only a small selection of these packages is introduced here. Additional useful introductions to this topic are: BioC ChIP-seq Case Study and BioC ChIP-Seq.

chipseq

The chipseq package combines a variety of HT-Seq packages to a pipeline for ChIP-Seq data analysis. Documentation

BayesPeak

BayesPeak is a peak calling package for identifying DNA binding sites of proteins in ChIP-Seq experiments. Its algorithm uses hidden Markov models (HMM) and Bayesian statistical methods. The following sample code introduces the identification of peaks with the BayesPeak package as well as the incorporation of read coverage information obtained by the chipseq package. Documentation [ Publication ]

PICS

The PICS package applies probabilistic inference to aligned-read ChIP-Seq data in order to identify regions bound by transcription factors. PICS identifies enriched regions by modeling local concentrations of directional reads, and uses DNA fragment length prior information to discriminate closely adjacent binding events via a Bayesian hierarchical t-mixture model. The following sample code uses the test data set from the above BayesPeak package in order to compare the results from both methods by identifying their consensus peak set. Documentation [ Publication ]

ChIPpeakAnno

The ChIPpeakAnno package provides. batch annotation of the peaks identified from either ChIP-seq or ChIP-chip experiments. It includes functions to retrieve the sequences around peaks, obtain enriched Gene Ontology (GO) terms, find the nearest gene, exon, miRNA or custom features such as most conserved elements and other transcription factor binding sites supplied by users. The package leverages the biomaRt, IRanges, Biostrings, BSgenome, GO.db, multtest and stat packages. Documentation

Additional ChIP-Seq Packages

DiffBind: Documentation

MOSAICS: Documentation

iSeq: Documentation

ChIPseqR: Documentation

ChiPsim: Documentation

CSAR: Documentation

ChIP-Seq Pipeline: PICS, rGADEM and MotIV (developer web site)

SPP: ChIP-seq processing pipeline

SPP Tutorial

MACS

SIPeS

RNA-Seq Analysis

Counting Reads that Overlap with Annotation Ranges

The GenomicRanges package provides support for importing into R short read alignment data in BAM format (via Rsamtools) and associating them with genomic feature ranges, such as exons or genes. This way one can quantify the number of reads aligning to annotated genomic regions. The package defines general purpose containers for storing genomic intervals as well as more specialized containers for storing alignments against a reference genome. The two main functions for read counting provided by this infrastructure are countOverlaps and summarizeOverlaps. For their proper usage, it is important to read the corresponding PDF manual. Documentation

Differential Gene Expression Analysis with DESeq

The DESeq package contains functions to call differentially expressed genes (DEGs) in count tables based on a model using the negative binomial distribution. It expects as input a data frame with the raw read counts per region/gene of interest (rows) for each test sample (columns). Such a count table can be imported into R or generated from BAM alignment files using the countOverlaps function as introduced above. Documentation

Differential Gene Expression Analysis with edgeR

The edgeR package uses empirical Bayes estimation and exact tests based on the negative binomial distribution to call differentially expressed genes (DEGs) in count data.

Documentation

A variety of additional R packages are available for normalizing RNA-Seq read count data and identifying differentially expressed genes (DEG):

easyRNASeq (simplifies read counting per genome feature)

DEXSeq (Inference of differential exon usage); parathyroidSE explains how to generate exon read counts in R

DEGseq

baySeq (also see: segmentSeq)

Genominator (Bullard et al. 2010)

Detection of Alternative Splice Junctions

Another utility of RNA-Seq experiments is the analysis of splice junctions. The following software suggestions provide this utility:

ERANGE
TopHat

SpliceMap

SplitSeek

DNA-Methylation Data Analysis

methylPipe
bsseq
BiSeq
Much more under BiocViews

HT-Seq Data Visualization

ggbio: ggplot2 extension for genomics data (online manual) Gviz: Plotting data and annotation information along genomic coordinates HilbertVis: Hilbert genome plots

GenomeGraphs: Plotting genomic information from Ensembl

TileQC: Flow Cell Quality Visualization

rtracklayer: R interface to genome browsers

genoPlotR: Plotting maps of genes and genomes

Genominator: Tools for storing, accessing, analyzing and visualizing genomic data.

To install all packages

source("http://bioconductor.org/biocLite.R")
biocLite()
biocLite(c("ShortRead", "Biostrings", "IRanges", "BSgenome", "rtracklayer", "biomaRt", "chipseq", "ChIPpeakAnno", "Rsamtools", "BayesPeak", "PICS", "GenomicRanges", "DESeq", "edgeR", "leeBamViews", "GenomicFeatures", "BSgenome.Celegans.UCSC.ce2"))

A guide for complete R beginners :- Installing R packages

Archana Malhotra — Tue, 24 Feb 2015 20:23:34 -0600

Part of the reason R has become so popular is the vast array of packages available at the cran and bioconductor repositories. In the last few years, the number of packages has grown exponentially!

This is a short post giving steps on how to actually install R packages. Let’s suppose you want to install the ggplot2 package. Well nothing could be easier. We just fire up an R shell and type:
> install.packages("ggplot2")

In theory the package should just install, however:

if you are using Linux and don’t have root access, this command won’t work.
you will be asked to select your local mirror, i.e. which server should you use to download the package.

Installing packages without root access

First, you need to designate a directory where you will store the downloaded packages. On my machine, I use the directory /data/Rpackages/ After creating a package directory, to install a package we use the command:
> install.packages("ggplot2", lib="/data/Rpackages/") > library(ggplot2, lib.loc="/data/Rpackages/")

It’s a bit of a pain having to type /data/Rpackages/ all the time. To avoid this burden, we create a file .Renviron in our home area, and add the line R_LIBS=/data/Rpackages/ to it. This means that whenever you start R, the directory /data/Rpackages/ is added to the list of places to look for R packages and so:

> install.packages("ggplot2") > library(ggplot2)

just works!

Setting the repository

Every time you install a R package, you are asked which repository R should use. To set the repository and avoid having to specify this at every package install, simply:

create a file .Rprofile in your home area.
Add the following piece of code to it:

cat(".Rprofile: Setting UK repositoryn") r = getOption("repos") # hard code the UK repo for CRAN r["CRAN"] = "http://cran.uk.r-project.org" options(repos = r) rm(r)

I found this tip in a stackoverflow answer .

CSBB-v1.0

Neel — Wed, 29 Jun 2016 07:33:05 -0500

CSBB is a command line based bioinformatics suite to analyze biological data acquired through varied avenues of biological experiments. CSBB is implemented in Perl, while it also leverages the use of R and python in background for specific modules. Major focus of CSBB is to allow users from biology and bioinformatics community, to get benefited by performing down-stream analysis tasks while eliminating the need to write programming code. CSBB is currently available on Linux, UNIX, MAC OS and Windows platforms.

Currently CSBB provides 13 modules focused on analytical tasks like performing upper-quantile normalization on expression data or convert genome wide gene expression to z-scores when comparing expression data from different platforms.

More at https://github.com/skygenomics/CSBB-v1.0

Address of the bookmark: https://github.com/skygenomics/CSBB-v1.0

Venn Diagrams on R Studio

Jitendra Prajapati — Mon, 25 Apr 2016 16:22:28 -0500

First step: Install & load “VennDiagram” package.

# install.packages('VennDiagram')
library(VennDiagram)

Second step: Load data

Add filepath if “catdoge.csv” is not in working-directory.

d <- read.csv("catdoge.csv")

Address of the bookmark: http://rstudio-pubs-static.s3.amazonaws.com/13301_6641d73cfac741a59c0a851feb99e98b.html

How to install Perl modules manually, using CPAN command, and other quick ways

Jit — Fri, 12 Jul 2013 07:20:24 -0500

As a bioinformatics programmer, and crunchy data analyser you need to install several perl modules and dependencies. Installing Perl modules manually by resolving all the dependencies is tedious and annoying process. Some of the packages like GD is the real pain.

However, Installing Perl modules using CPAN is a better solution, as it resolves all the dependencies automatically. In this article, let us review how to install Perl modules on Linux ( which is prefereced amonst bioinformatician) using both manual and CPAN method.

When a Perl module is not installed, application will display the following error message. In this example, XML::Parser Perl module is missing.

Can't locate XML/parser.pm in @INC (@INC contains:
/usr/lib/perl5/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/5.10.0
/usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi
/usr/local/lib/perl5/site_perl/5.10.0
/usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl
/usr/lib/perl5/site_perl/5.10.0 .)

Manual Method of Perl Module Installation

Install Perl Modules Manually

This manual method is very useful when your computer or server is not connected to the Internet.

Download Perl module:
Go to CPAN Search website and search for the module that you wish to download. In this example, let us search, download and install XML::Parser Perl module. I have downloaded the XML-Parser-2.36.tar.gz to /home/download

# cd /home/download
# gzip -d XML-Parser-2.36.tar.gz
# tar xvf XML-Parser-2.36.tar
# cd XML-Parser-2.36

Build the perl module:
Build by running Makefile.PL, remember the case sensitivity, make and make test.

# perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for XML::Parser::Expat
Writing Makefile for XML::Parser
# make
# make test

Install the perl module:
Now your package is ready to install.

# make install

As a newbie it looks pretty simple, and one go. But, luckily this is a very simple one module with no dependencies. Typically, Perl modules will be dependent on several other modules. Just imagine chasing all these dependencies one-by-one, thinking ... oh ye I got it. That will be very painful and annoying task. I recommend the CPAN method of installation as shown below.

Install Perl Modules using CPAN automatically

Logically, you should must have the CPAN perl module installed in your server or computer before you can install any other Perl modules using CPAN. I know you are laughing, "to install a perl module you need another perl module" ;)

Lets verify whether CPAN is already installed:

To install Perl modules using CPAN, make sure the cpan command is working. Following are the error message when CPAN module is not installed.

# cpan
-bash: cpan: command not found

# perl -MCPAN -e shell
Can't locate CPAN.pm in @INC (@INC contains:
/usr/lib/perl5/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/5.10.0
/usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi
/usr/local/lib/perl5/site_perl/5.10.0
/usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.10.0
/usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.10.0 .).
BEGIN failed--compilation aborted.

Install the CPAN module using yum:
If CPAN in not installed in your system, you can use "yum" for the rescue. Dont worry biological data cruncher, this is true we are now dependent all these tiny magicians :).

# yum install perl-CPAN

Output of yum install perl-CPAN command:

Loaded plugins: refresh-packagekit
updates-newkey                       | 2.3 kB     00:00
primary.sqlite.bz2                   | 2.4 MB     00:00
Setting up Install Process
Parsing package install arguments

Resolving Dependencies
Transaction Summary
=============================================================================
Install      5 Package(s)
Update       0 Package(s)
Remove       0 Package(s)

Total download size: 1.0 M
Is this ok [y/N]: y
Downloading Packages:
(1/5): perl-ExtUtils-ParseXS-2.18-31.fc9.i386.rpm     | 30 kB     00:00
(2/5): perl-Test-Harness-2.64-31.fc9.i386.rpm         | 70 kB     00:00
(3/5): perl-CPAN-1.9205-31.fc9.i386.rpm               | 217 kB     00:00
(4/5): perl-ExtUtils-MakeMaker-6.36-31.fc9.i386.rpm   | 284 kB     00:00
(5/5): perl-devel-5.10.0-31.fc9.i386.rpm              | 408 kB     00:00

Installing     : perl-ExtUtils-ParseXS                             [1/5]
Installing     : perl-devel                                        [2/5]
Installing     : perl-Test-Harness                                 [3/5]
Installing     : perl-ExtUtils-MakeMaker                           [4/5]
Installing     : perl-CPAN                                         [5/5]

Installed: perl-CPAN.i386 0:1.9205-31.fc9
Dependency Installed:
perl-ExtUtils-MakeMaker.i386 0:6.36-31.fc9
perl-ExtUtils-ParseXS.i386 1:2.18-31.fc9
perl-Test-Harness.i386 0:2.64-31.fc9
perl-devel.i386 4:5.10.0-31.fc9
Complete!

Configure cpan the first time:
Once the CPAN is installed, you need to configure it by executing cpan, you should set some configuration parameters as shown below. I have shown only the important configuration parameters below. Accept all the default values by pressing enter.

Note: Make sure to execute “o conf commit” in the cpan prompt after the configuration to save the settings.

# cpan

Sorry, we have to rerun the configuration dialog for CPAN.pm due
to some missing parameters...

CPAN build and cache directory? [/root/.cpan]
Download target directory? [/root/.cpan/sources]
Directory where the build process takes place? [/root/.cpan/build]

Always commit changes to config variables to disk? [no]
Cache size for build directory (in MB)? [100]
Let the index expire after how many days? [1]

Perform cache scanning (atstart or never)? [atstart]
Cache metadata (yes/no)? [yes]
Policy on building prerequisites (follow, ask or ignore)? [ask]

Parameters for the 'perl Makefile.PL' command? []
Parameters for the 'perl Build.PL' command? []

Your ftp_proxy? []
Your http_proxy? []
Your no_proxy? []
Is it OK to try to connect to the Internet? [yes]

First, pick a nearby continent and country by typing in the number(s)
(1) Africa
(2) Asia
(3) Central America
(4) Europe
(5) North America
(6) Oceania
(7) South America
Select your continent (or several nearby continents) [] 5

(1) Bahamas
(2) Canada
(3) Mexico
(4) United States
Select your country (or several nearby countries) [] 4

(2) ftp://carroll.cac.psu.edu/pub/CPAN/
(3) ftp://cpan-du.viaverio.com/pub/CPAN/
(4) ftp://cpan-sj.viaverio.com/pub/CPAN/
(5) ftp://cpan.calvin.edu/pub/CPAN
(6) ftp://cpan.cs.utah.edu/pub/CPAN/
e.g. '1 4 5' or '7 1-4 8' [] 2-16

cpan[1]> o conf commit
commit: wrote '/usr/lib/perl5/5.10.0/CPAN/Config.pm'

cpan[2]> quit
No history written (no histfile specified).
Lockfile removed.

Install Perl Modules using CPAN

Hey smile please, now you are ready with CPAN and can download modules in one line command.

You can use one of the following method to install a Perl module using cpan:

# perl -MCPAN -e 'install Bundle::BioPerl'

(or)

# cpan
cpan shell -- CPAN exploration and modules installation (v1.9205)
ReadLine support available (maybe install Bundle::CPAN or Bundle::CPANxxl?)

cpan[1]> install "Bundle::BioPerl"

In the example above, CPAN will check for Bundle::BioPerl dependencies and automatically resolves and installs Bundle::BioPerl with all the dependent Perl modules.

Quick Ways

Oh, look at your face.. smily hmm :). This is what your are looking for, a quick and best way to install Perl modules, Bioperl. Following are the the steps to download BioPerl in your server/computer.

# sudo apt-cache search perl BioPerl

Output will be like as follows:

bioperl - Perl tools for computational molecular biology
bioperl-run - BioPerl wrappers: scripts
libbio-perl-perl - BioPerl core perl modules
libbio-perl-run-perl - BioPerl wrappers: modules
libbio-samtools-perl - Perl interface to SamTools library for DNA sequencing
libbiojava-java - Java API to biological data and applications (default version)
libbiojava3-java - Java API to biological data and applications (default version)
python-biopython-sql - Biopython support for the BioSQL database schema
libbtlib-perl - library for basic sequence manipulation

# sudo apt-get install bioperl

If it is installed then flash the following message:

Reading package lists... Done
Building dependency tree
Reading state information... Done
bioperl is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 10 not upgraded.

In it is found not installed in your server or system them install all with dependencies.

You can use the same approach to install all the modules, and packages if required.

Thanks for reading. Best of luck for your research.

WGS Celera Assembler version 8.3rc2

Jit — Mon, 10 Apr 2017 04:45:40 -0500

These are release notes for Celera Assembler version 8.3rc2, which was released on May 24, 2015.

This distribution package provides a stable, tested, documented version of the software. The distribution is usable on most Unix-like platforms, and some platforms have pre-compiled binary distributions ready for installation.

The source code package includes full source code (revision 4627), Makefiles, and scripts. A subset of the kmer package (http://kmer.sourceforge.net/, version r1994), used by some modules of Celera Assembler, is included. This distribution includes [http://samtools.sourceforge.net/ SAMtools], [http://www.cbcb.umd.edu/software/jellyfish/ Jellyfish 2.0], [https://github.com/pbjd/pbutgcns PBUTGCNS], [https://github.com/PacificBiosciences/pbdagcon PBDAGCON], [https://github.com/PacificBiosciences/BLASR BLASR], and parts of the [https://github.com/PacificBiosciences/FALCON/tree/v0.1.3 Falcon assembler].

Full documentation can be found online at http://wgs-assembler.sourceforge.net/.

Interesting scripts within it

urbe@urbo214b[bin] ls []
-rwxrwxr-x 1 urbe urbe 11K Apr 10 11:41 addCNSToStore
-rwxrwxr-x 1 urbe urbe 575K Apr 10 11:41 addReadsToUnitigs
-rwxrwxr-x 1 urbe urbe 128K Apr 10 11:41 analyzeBest
-rwxrwxr-x 1 urbe urbe 257K Apr 10 11:41 analyzePosMap
-rwxrwxr-x 1 urbe urbe 1,5M Apr 10 11:41 analyzeScaffolds
-rwxrwxr-x 1 urbe urbe 224K Apr 10 11:41 asmOutputFasta
-rwxrwxr-x 1 urbe urbe 448K Apr 10 11:41 asmOutputStatistics
-rwxrwxr-x 1 urbe urbe 2,4K Apr 10 11:41 asmToAGP.pl
-rwxrwxr-x 1 urbe urbe 7,6M Apr 10 11:41 blasr
-rwxrwxr-x 1 urbe urbe 1,6M Apr 10 11:41 bogart
-rwxrwxr-x 1 urbe urbe 183K Apr 10 11:41 bogus
-rwxrwxr-x 1 urbe urbe 272K Apr 10 11:41 bogusness
-rwxrwxr-x 1 urbe urbe 247K Apr 10 11:41 buildPosMap
-rwxrwxr-x 1 urbe urbe 213K Apr 10 11:41 buildRefContigs
-rwxrwxr-x 1 urbe urbe 990K Apr 10 11:41 buildUnitigs
-rwxrwxr-x 1 urbe urbe 18K Apr 10 11:41 ca2ace.pl
-rwxrwxr-x 1 urbe urbe 12K Apr 10 11:41 caqc_help.ini
-rwxrwxr-x 1 urbe urbe 61K Apr 10 11:41 caqc.pl
-rwxrwxr-x 1 urbe urbe 23K Apr 10 11:41 cat-corrects
-rwxrwxr-x 1 urbe urbe 24K Apr 10 11:41 cat-erates
-rwxrwxr-x 1 urbe urbe 1,9M Apr 10 11:41 cgw
-rwxrwxr-x 1 urbe urbe 1,4M Apr 10 11:41 cgwDump
-rwxrwxr-x 1 urbe urbe 204K Apr 10 11:41 chimChe
-rwxrwxr-x 1 urbe urbe 201K Apr 10 11:40 chimera
-rwxrwxr-x 1 urbe urbe 220K Apr 10 11:41 classifyMates
-rwxrwxr-x 1 urbe urbe 201K Apr 10 11:41 classifyMatesApply
-rwxrwxr-x 1 urbe urbe 215K Apr 10 11:41 classifyMatesPairwise
-rwxrwxr-x 1 urbe urbe 366K Apr 10 11:41 computeCoverageStat
-rwxrwxr-x 1 urbe urbe 9,8K Apr 10 11:41 convert-fasta-to-v2.pl
-rwxrwxr-x 1 urbe urbe 48K Apr 10 11:41 convertOverlap
-rwxrwxr-x 1 urbe urbe 119K Apr 10 11:41 convertSamToCA
-rwxrwxr-x 1 urbe urbe 20K Apr 10 11:41 convertToPBCNS
-rwxrwxr-x 1 urbe urbe 197K Apr 10 11:41 correct-frags
-rwxrwxr-x 1 urbe urbe 259K Apr 10 11:41 correct-olaps
-rwxrwxr-x 1 urbe urbe 520K Apr 10 11:41 correctPacBio
-rwxrwxr-x 1 urbe urbe 540K Apr 10 11:41 ctgcns
-rwxrwxr-x 1 urbe urbe 162K Apr 10 11:40 deduplicate
-rwxrwxr-x 1 urbe urbe 37K Apr 10 11:41 demotePosMap
-rwxrwxr-x 1 urbe urbe 1,5M Apr 10 11:41 dumpCloneMiddles
-rwxrwxr-x 1 urbe urbe 124K Apr 10 11:41 dumpPBRLayoutStore
-rwxrwxr-x 1 urbe urbe 1,3M Apr 10 11:41 dumpSingletons
-rwxrwxr-x 1 urbe urbe 171K Apr 10 11:41 erate-estimate
-rwxrwxr-x 1 urbe urbe 221K Apr 10 11:40 estimate-mer-threshold
-rwxrwxr-x 1 urbe urbe 1,5M Apr 10 11:41 extendClearRanges
-rwxrwxr-x 1 urbe urbe 1,3M Apr 10 11:41 extendClearRangesPartition
-rwxrwxr-x 1 urbe urbe 205K Apr 10 11:40 extractmessages
-rwxrwxr-x 1 urbe urbe 7,2M Apr 10 11:41 falcon_sense
-rwxrwxr-x 1 urbe urbe 9,8K Apr 10 11:41 fastaToCA
-rwxrwxr-x 1 urbe urbe 124K Apr 10 11:40 fastqAnalyze
-rwxrwxr-x 1 urbe urbe 137K Apr 10 11:40 fastqSample
-rwxrwxr-x 1 urbe urbe 62K Apr 10 11:40 fastqSimulate
-rwxrwxr-x 1 urbe urbe 121K Apr 10 11:40 fastqSimulate-sort
-rwxrwxr-x 1 urbe urbe 246K Apr 10 11:40 fastqToCA
-rwxrwxr-x 1 urbe urbe 140K Apr 10 11:41 filterOverlap
-rwxrwxr-x 1 urbe urbe 341K Apr 10 11:40 finalTrim
-rwxrwxr-x 1 urbe urbe 228K Apr 10 11:41 fixUnitigs
-rwxrwxr-x 1 urbe urbe 147K Apr 10 11:40 fragmentDepth
-rwxrwxr-x 1 urbe urbe 29K Apr 10 11:41 fragsInVars
-rwxrwxr-x 1 urbe urbe 545K Apr 10 11:41 frgs2clones
-rwxrwxr-x 1 urbe urbe 398K Apr 10 11:40 gatekeeper
-rwxrwxr-x 1 urbe urbe 139K Apr 10 11:40 gatekeeperbench
-rwxrwxr-x 1 urbe urbe 167K Apr 10 11:40 gkpStoreCreate
-rwxrwxr-x 1 urbe urbe 147K Apr 10 11:40 gkpStoreDumpFASTQ
-rwxrwxr-x 1 urbe urbe 184K Apr 10 11:41 greedyFragmentTiling
-rwxrwxr-x 1 urbe urbe 1,6K Apr 10 11:41 greedy_layout_to_IUM
-rwxrwxr-x 1 urbe urbe 142K Apr 10 11:40 initialTrim
-rwxrwxr-x 1 urbe urbe 967K Apr 10 11:41 jellyfish
-rwxrwxr-x 1 urbe urbe 219K Apr 10 11:41 markRepeatUnique
-rwxrwxr-x 1 urbe urbe 273K Apr 10 11:40 markUniqueUnique
-rwxrwxr-x 1 urbe urbe 114K Apr 10 11:40 mercy
-rwxrwxr-x 1 urbe urbe 3,8K Apr 10 11:41 mergeqc.pl
-rwxrwxr-x 1 urbe urbe 422K Apr 10 11:40 merTrim
-rwxrwxr-x 1 urbe urbe 125K Apr 10 11:40 merTrimApply
-rwxrwxr-x 1 urbe urbe 376K Apr 10 11:40 meryl
-rwxrwxr-x 1 urbe urbe 176K Apr 10 11:41 metagenomics_ovl_analyses
-rwxrwxr-x 1 urbe urbe 297K Apr 10 11:41 olap-from-seeds
-rwxrwxr-x 1 urbe urbe 275K Apr 10 11:41 outputLayout
-rwxrwxr-x 1 urbe urbe 229K Apr 10 11:41 overlapInCore
-rwxrwxr-x 1 urbe urbe 144K Apr 10 11:40 overlap_partition
-rwxrwxr-x 1 urbe urbe 179K Apr 10 11:41 overlapStats
-rwxrwxr-x 1 urbe urbe 179K Apr 10 11:41 overlapStore
-rwxrwxr-x 1 urbe urbe 153K Apr 10 11:41 overlapStoreBucketizer
-rwxrwxr-x 1 urbe urbe 175K Apr 10 11:41 overlapStoreBuild
-rwxrwxr-x 1 urbe urbe 33K Apr 10 11:41 overlapStoreIndexer
-rwxrwxr-x 1 urbe urbe 48K Apr 10 11:41 overlapStoreSorter
-rwxrwxr-x 1 urbe urbe 604K Apr 10 11:40 overmerry
lrwxrwxrwx 1 urbe urbe 4 Apr 10 11:41 pacBioToCA -> PBcR
-rwxrwxr-x 1 urbe urbe 131K Apr 10 11:41 PBcR
-rwxrwxr-x 1 urbe urbe 2,9M Apr 10 11:41 pbdagcon
-rwxrwxr-x 1 urbe urbe 1,9M Apr 10 11:41 pbutgcns
-rwxrwxr-x 1 urbe urbe 201K Apr 10 11:40 remove_fragment
-rwxrwxr-x 1 urbe urbe 153K Apr 10 11:40 removeMateOverlap
-rwxrwxr-x 1 urbe urbe 2,5K Apr 10 11:41 replaceUIDwithName-fastq
-rwxrwxr-x 1 urbe urbe 1,2K Apr 10 11:41 replaceUIDwithName-posmap
-rwxrwxr-x 1 urbe urbe 1,3M Apr 10 11:41 resolveSurrogates
-rwxrwxr-x 1 urbe urbe 139K Apr 10 11:41 rewriteCache
-rwxrwxr-x 1 urbe urbe 232K Apr 10 11:41 runCA
-rwxrwxr-x 1 urbe urbe 88K Apr 10 11:41 runCA-dedupe
-rwxrwxr-x 1 urbe urbe 14K Apr 10 11:41 runCA-overlapStoreBuild
-rwxrwxr-x 1 urbe urbe 3,6K Apr 10 11:41 run_greedy.csh
-rwxrwxr-x 1 urbe urbe 297K Apr 10 11:40 sffToCA
-rwxrwxr-x 1 urbe urbe 13K Apr 10 11:40 show-corrects
-rwxrwxr-x 1 urbe urbe 557K Apr 10 11:41 splitUnitigs
-rwxrwxr-x 1 urbe urbe 1,4M Apr 10 11:41 terminator
drwxrwxr-x 2 urbe urbe 4,0K Apr 10 11:41 TIGR
-rwxrwxr-x 1 urbe urbe 526K Apr 10 11:41 tigStore
-rwxrwxr-x 1 urbe urbe 35K Apr 10 11:41 tracearchiveToCA
-rwxrwxr-x 1 urbe urbe 35K Apr 10 11:41 tracedb-to-frg.pl
-rwxrwxr-x 1 urbe urbe 44K Apr 10 11:41 trimFastqByQVWindow
-rwxrwxr-x 1 urbe urbe 18K Apr 10 11:40 uidclient
-rwxrwxr-x 1 urbe urbe 589K Apr 10 11:41 unitigger
-rwxrwxr-x 1 urbe urbe 42K Apr 10 11:40 upgrade-v8-to-v9
-rwxrwxr-x 1 urbe urbe 42K Apr 10 11:40 upgrade-v9-to-v10
-rwxrwxr-x 1 urbe urbe 854 Apr 10 11:41 utg2fasta
-rwxrwxr-x 1 urbe urbe 731K Apr 10 11:41 utgcns
-rwxrwxr-x 1 urbe urbe 561K Apr 10 11:41 utgcnsfix

Address of the bookmark: http://wgs-assembler.sourceforge.net/wiki/index.php/Main_Page

Which are the best statistical programming languages to study for a bioinformatician?

Jitendra Narayan — Wed, 10 Jul 2013 14:35:34 -0500

In Bio-informatics based genome sequencing and predicting metabolic pathways research jobs I used Matlab, SAS, SPSS, R and several Bioconductor packages. Matlab had a lot of powerful tools and was easy to use, whereas SPSS is for non-programmers and R need programming skills. I am wondering what other people think is best? or there might not be one specific language but a few that lend themselves best to Bio-informatics work that is math heavy and deals with a large amount of data.

Postdoctoral Associate - Bioinformatics at Duke University Medical Center

Sat, 10 Aug 2013 18:38:38 -0500

The Department of Biostatistics and Bioinformatics at Duke University Medical Center is seeking a Postdoctoral Associate for a one year appointment to work on several high-dimensional research projects. The specific goals of the project are to identify genes or molecular markers that are predictive of clinical outcomes in renal and prostate cancer.

Candidates must have: a PhD degree in statistics, biostatistics or bioinformatics, extensive experience in analyzing high-dimensional data (microarray, SNP, CNVs) and of validation approaches. In addition, experience in penalized regression methods, data base manipulation; and strong programming skills in order to conduct Monte Carlo studies and applications (R). Candidate must have excellent communication skills (verbal, written and presentation), a strong proficiency in Linux system.

This position is available immediately and will be filled as soon as possible. Appointment could be extended beyond the first year based on additional funding.

For more information about the Department of Biostatistics and Bioinformatics, please visit our website: http://www.biostat.duke.edu.

For more info: http://biostat.duke.edu/sites/biostat.duke.edu/files/Halabi%20-%20Postdoc%20Job%20Posting%202013%20updated.pdf

Duke University is an Equal Opportunity/Affirmative Action Employer.

RNA-Seq Data Pathway and Gene-set Analysis Workflows

Jit — Fri, 25 Oct 2013 08:00:48 -0500

It describe the GAGE (Luo et al., 2009) /Pahview (Luo and Brouwer, 2013) workflows on RNA-Seq data pathway analysis and gene-set analysis. The gage package (2.12.0) now includes a new tutorial, “RNA-Seq Data Pathway and Gene-set Analysis Workflows“.

First cover a full workflow from preparation, reads counting, data preprocessing, gene set test, to pathway visualization in about 40 lines of codes. The same workflow can be used for GO analysis or other types of gene set analysis too. We also describe joint workflows, i.e. to do gene-level analysis using one of the major RNA-Seq analysis tools, DEseq/DEseq2, edgeR, limma and Cufflinks, and feed the results into GAGE/Pahview for pathway analysis or visualization. All these workflows are implemented in R/Bioconductor.

The work ows cover the most common situations and issues for RNA-Seq data pathway analysis. Issues like data quality assessment are relevant for data analysis in general yet out the scope of this tutorial. Although we focus on RNA-Seq data here, but pathway analysis work ow remains similar for microarray, particularly step 3-4 would be the same. Please check gage and pathview vigenttes for details.

Note: You need to update to current release versions of R(3.0.2)/ Bioconductor(2.13) to use all the features.

Reference:

Please check it out:
http://bioconductor.org/packages/release/bioc/html/gage.html
http://bioconductor.org/packages/release/bioc/vignettes/gage/inst/doc/RNA-seqWorkflow.pdf

Surrogate Variable Analysis (SVA)

Jit — Thu, 30 Oct 2014 08:01:58 -0500

The sva package contains functions for removing batch effects and other unwanted variation in high-throughput experiment. Specifically, the sva package contains functions for the identifying and building surrogate variables for high-dimensional data sets. Surrogate variables are covariates constructed directly from high-dimensional data (like gene expression/RNA sequencing/methylation/brain imaging data) that can be used in subsequent analyses to adjust for unknown, unmodeled, or latent sources of noise. The sva package can be used to remove artifacts in three ways:

(1) identifying and estimating surrogate variables for unknown sources of variation in high-throughput experiments (Leek and Storey 2007 PLoS Genetics,2008 PNAS),

(2) directly removing known batch effects using ComBat (Johnson et al. 2007 Biostatistics) and

(3) removing batch effects with known control probes (Leek 2014 biorXiv).

Removing batch effects and using surrogate variables in differential expression analysis have been shown to reduce dependence, stabilize error rate estimates, and improve reproducibility, see (Leek and Storey 2007 PLoS Genetics, 2008 PNAS or Leek et al. 2011 Nat. Reviews Genetics).

More at http://www.bioconductor.org/packages/release/bioc/html/sva.html