BOL: Related items

GeneProf: analysis of high-throughput sequencing experiment

Jit — Wed, 05 Jul 2017 16:47:05 -0500

GeneProf is a web-based, graphical software suite that allows users to analyse data produced using high-throughput sequencing platforms (RNA-seq and ChIP-seq; "Next-Generation Sequencing" or NGS): Next-gen analysis for next-gen data!

Some of GeneProf's highlights include:

Easy-to-use web-based interface:Access your data at any time from any computer with a working internet connection -- no need to install software! (cp. Section 'System Requirements').
Analysis wizards make your life easy:Step-by-step workflows make it easy to analyse high-throughput data within a minimum of hands-on time. (cp. SubConcept 'Analysis Wizards').
Versatile modules:Advanced users and data analysis experts benefit from GeneProf's broad range of analysis modules, which can be combined freely into sophisticated workflows (cp. Concept 'Workflows').
Integrated Analysis:Analysis of ChIP-seq and RNA-seq data in one place, plus support for the integration of other external data (e.g. from microarrays).
Comprehensive Resource:GeneProf provides a comprehensive resource of fully analyzed next-generation sequencing data. Experimental results can be easily accessed and compared and the analysis procedures employed to produce the data are fully transparent (cp. Tutorial 'Examining Public Next-Gen Data..').
Extensibility:Algorithm developers and computer programmers can develop their own modules and extend GeneProf. Existing software can be easily wrapped in the workflow framework (cp. Section 'Module Development: Adding new..') and data from GeneProf may be used externally (cp. Section 'Web API: Retrieving Data from ..').

GeneProf is academic software developed at the Centre for Regenerative Medicine / Institute for Stem Cell Research, University of Edinburgh and has benefited from funding by the Medical Research Council and the EU Framework 7 Project "EuroSyStem".

Address of the bookmark: https://www.geneprof.org/GeneProf/index.jsp

Magic-BLAST: a tool for mapping large next-generation RNA or DNA sequencing runs against a whole genome or transcriptome.

Jit — Tue, 26 Dec 2017 22:23:39 -0600

Magic-BLAST is a tool for mapping large next-generation RNA or DNA sequencing runs against a whole genome or transcriptome. Each alignment optimizes a composite score, taking into account simultaneously the two reads of a pair, and in case of RNA-seq, locating the candidate introns and adding up the score of all exons. This is very different from other versions of BLAST, where each exon is scored as a separate hit and read-pairing is ignored.

Magic-BLAST incorporates within the NCBI BLAST code framework ideas developed in the NCBI Magic pipeline, in particular hit extensions by local walk and jump (http://www.ncbi.nlm.nih.gov/pubmed/26109056), and recursive clipping of mismatches near the edges of the reads, which avoids accumulating artefactual mismatches near splice sites and is needed to distinguish short indels from substitutions near the edges.

Address of the bookmark: https://ncbi.github.io/magicblast/

Indexcov: fast coverage quality control for whole-genome sequencing

Jit — Wed, 29 Aug 2018 09:20:46 -0500

indexcov, an efficient estimator of whole-genome sequencing coverage to rapidly identify samples with aberrant coverage profiles, reveal large-scale chromosomal anomalies, recognize potential batch effects, and infer the sex of a sample. Indexcov is available at https://github.com/brentp/goleft under the MIT license.

Address of the bookmark: https://github.com/brentp/goleft

VariantBam: Filtering and profiling of next-generational sequencing data using region-specific rules

Rahul Nayak — Thu, 04 Oct 2018 16:30:44 -0500

VariantBam is a tool to extract/count specific sets of sequencing reads from next-generational sequencing files. To save money, disk space and I/O, one may not want to store an entire BAM on disk. In many cases, it would be more efficient to store only those read-pairs or reads who intersect some region around the variant locations. Alternatively, if your scientific question is focused on only one aspect of the data (e.g. breakpoints), many reads can be removed without losing the information relevant to the problem.

Address of the bookmark: https://github.com/broadinstitute/VariantBam

NanoPack: visualizing and processing long-read sequencing data

Jit — Tue, 25 Dec 2018 21:20:50 -0600

The NanoPack tools are written in Python3 and released under the GNU GPL3.0 License. The source code can be found at https://github.com/wdecoster/nanopack, together with links to separate scripts and their documentation. The scripts are compatible with Linux, Mac OS and the MS Windows 10 subsystem for Linux and are available as a graphical user interface, a web service at http://nanoplot.bioinf.be and command line tools.

Address of the bookmark: https://github.com/wdecoster/nanopack

Prof. Dr. med. Andreas Ramming

Wed, 07 Aug 2019 03:25:48 -0500

In many autoimmune diseases, a misdirected immune response leads to chronic inflammation and subsequently to fibrotic and degenerative tissue remodeling. Therapeutic options are available for inflammatory joint diseases, but only about 40% of patients respond to these existing therapies on a permanent basis. In the remaining cases, these therapies miss their target from the beginning or later during the course of treatment failure. There are currently no causal therapies available for the treatment of fibrotic autoimmune diseases such as systemic sclerosis. Therefore, there is an urgent need to develop new therapeutic options for the treatment of fibrotic and synovitic autoimmune diseases. His group is therefore deal with the molecular mechanisms of these misdirected signaling pathways for the development of novel, targeted therapies

http://www.medizin3.uk-erlangen.de/forschung/arbeitsgruppen/matrixbiologie-entzuendliche-signalwege-in-arthritis-und-fibrose/

PhD position in Translational Medicine

Sat, 15 Feb 2020 06:07:19 -0600

https://www.jobvector.de/jobs-stellenangebote/biologie-life-sciences/wissenschaftliche-r-mitarbeiter-in/phd-position-translational-medicine-129981.html?suid=1b510358c7578e8f75cf04a464fc21a404a574ca

Essential experience / qualifications:
Master / Diploma in Biology, Biochemistry, Molecular Medicine or similar; solid knowledge of molecular and cell biological techniques; good English knowledge

Applications:
Please send your application (including CV, letter of motivation, contact information of two references, and list of publication) by 13.03.2020 at the latest to:

Universitätsklinikum Erlangen
Chirurgische Klinik
Translational Research Center
Prof. Dr. rer. nat. Michael Stürzl
Schwabachanlage 12
91054 Erlangen
E-Mail: michael.stuerzl@uk-erlangen.de

Ktrim: an extra-fast and accurate adapter- and quality-trimmer for sequencing data

Jit — Thu, 11 Feb 2021 21:39:05 -0600

Ktrim is written in C++ for GNU Linux/Unix platforms. After uncompressing the source package, you can find an executable file ktrim under bin/ directory compiled using g++ v4.8.5 and linked with libz v1.2.7 for Linux x86_64 system. If you could not run it (which is usually caused by low version of libc++ or libz library) or you want to build a version optimized for your system, you can re-compile the programs:

user@linux$ make clean && make

Address of the bookmark: https://github.com/hellosunking/Ktrim

Pollux: platform independent error correction of single and mixed genomes

Jit — Fri, 19 May 2017 09:41:27 -0500

Pollux: General-purpose error corrector that corrects errors introduced by Illumina, Ion Torrent, and Roche 454 sequencing technologies and can be applied to single- or mixed-genome data. In addition to correcting substitution errors, we locate and correct insertion, deletion, and homopolymer errors while remaining sensitive to low coverage areas of sequencing projects. Using published data sets, we correct 94% of Illumina MiSeq errors, 88% of Ion Torrent PGM errors, 85% of Roche 454 GS Junior errors. Introduced errors are 20 to 70 times more rare than successfully corrected errors. Furthermore, we show that the quality of assemblies improves when reads are corrected by our software.

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-014-0435-6

Address of the bookmark: https://github.com/emarinier/pollux

FERMI

Jit — Fri, 09 Sep 2016 05:37:13 -0500

Fermi is a de novo assembler with a particular focus on assembling Illumina short sequence reads from a mammal-sized genome. In addition to the role of a typical assembler, fermi also aims to preserve heterozygotes which are often collapsed by other assemblers. Its ultimate goal is to find a minimal set of
unitigs to represent all the information in raw reads.

Fermi follows the overlap-layout-consensus paradigm and uses the FM-DNA-index (FMD-index) as the key data structure. It is inspired by the string graph assembler (Simpson and Durbin, 2010 and 2012) and has a similar workflow.

As a typical de novo assembler, fermi tends to produce contigs with slightly longer N50. However, the major weakness of fermi is the high misassembly rate. Although fermi provides a tool to fix misassemblies by using paired-end reads to achieve an accuracy comparable to other assemblers, this is not a favorable solution.

Fermi is designed to be used on a multi-core Linux machine with large shared memory. The easiest way to run fermi is to use the run-fermi.pl script. It generates a Makefile. The actual assembly is done by invoking make. Premature assembly processes can be resumed. Here is an example:

run-fermi.pl -dAPe ./fermi -p NA12878 -t16 -f18 reads*.fq.gz > NA12878.mak
make -f NA12878.mak -j16

Address of the bookmark: https://github.com/lh3/fermi