Screen is like a window manager for your console. It will allow you to keep multiple terminal sessions running and easily switch between them. It also protects you from disconnection, because the screen session doesn’t end when you get disconnected.

You’ll need to make sure that screen is installed on the server you are connecting to. If that server is Ubuntu or Debian, just use this command:

sudo apt-get install screen

Now you can start a new screen session by just typing screen at the command line. You’ll be shown some information about screen. Hit enter, and you’ll be at a normal prompt.

To disconnect (but leave the session running)

Hit Ctrl + A and then Ctrl + D in immediate succession. You will see the message [detached]

To reconnect to an already running session

screen -r

To reconnect to an existing session, or create a new one if none exists

screen -D -r

To create a new window inside of a running screen session

Hit Ctrl + A and then C in immediate succession. You will see a new prompt.

To switch from one screen window to another

Hit Ctrl + A and then Ctrl + A in immediate succession.

To list open screen windows

Hit Ctrl + A and then W in immediate succession

Tasks:  239 total,   1 running,  238 sleeping,   0 stopped,   0 zombie

This line tells you how many processes are running. If you are using laptops machines it’s not so interesting because you really are the only one using this machine.

Cpu(s):  0.0%us,  0.0%sy,  0.0%ni,100.0%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st

This line contains the CPU load. The first two numbers are how busy the system is doing computation (“us” stands for “user”) and how busy the system is doing system-y things like accessing disks or network (“sy” stands for “system”). We’ll talk more about this later.

Mem:   49457320k total,    3492174k used,  14535596k free,    1435148k buffers

This should be easy to understand – how much memory you’re using!

Swap:   539356k total,   28332k used,   836562k free,    29862014k cached

Swap is just on-disk memory that can be used to “swap” out programs from main memory. Again, we’ll talk about this later.:

PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
  1 root      39   19  0  0  0 S  0.0  0.0   246:57.22 kipmi0
  2 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/0

And... finally! What’s actually running! The two most important numbers are the %CPU and %MEM towards the right, as well as the COMMAND. This tells you how compute- and memory-intensive your program is. Right now, nothing’s running so the numbers aren’t very interesting, but just wait until we run something...

Then I thaught it migh be a problem of graphical display and I opened the terminal out of curiosity, and I found out that there is no ~/Desktop folder at all. What happened? What do I need to do?

Then I google the problem and found this is a very common problem after updates. To fix this problem, follow these steps:

You need to edit the ~/.config/user-dirs.dirs file, and make sure the contents of the file are like the following:

XDG_DESKTOP_DIR="$HOME/Desktop"
XDG_DOWNLOAD_DIR="$HOME/Downloads"
XDG_TEMPLATES_DIR="$HOME/"
XDG_PUBLICSHARE_DIR="$HOME/Share"
XDG_DOCUMENTS_DIR="$HOME/Documents"
XDG_MUSIC_DIR="$HOME/Music"
XDG_PICTURES_DIR="$HOME/Pictures"
XDG_VIDEOS_DIR="$HOME/Videos"

Then restart nautilus:

killall nautilus

or

nautilus -q

Then, open nautilus via Unity menu (press the Super key) or using the run command (Alt+F2)

https://www.forbes.com/sites/jasonevangelho/2018/07/23/5-reasons-you-should-switch-from-windows-to-linux-right-now/#70c74923777b

The following table shows SLURM commands on the SOE cluster.

For more information, run man on the commands above. See some examples below.

1. Info about the partitions and nodes
List all the partitions available to you and the nodes therein:

sinfo

Nodes in state idle can accept new jobs.

Show a partition configuratuin, for example, SOE_main

scontrol show partition=SOE_main

Show current info about a specific node:

scontrol show node=<nodename>

You can also specify a group of nodes in the command above. For example, if your MPI job is running across soenode05,06,35,36, you can execute the command below to get the info on the nodes you are interested in:

scontrol show node=soenode[05-06,35-36]

An informative parameter in the output to look at would be CPULoad. It allows you to see how your application utilizes the CPUs on the running nodes.

2. Submit scripts
The header in a submit script specifies job name, partition (queue), time limit, memory allocation, number of nodes, number of cores, and files to collect standard output and error at run time, for example

#!/bin/bash

#SBATCH --job-name=OMP_run     # job name, "OMP_run"
#SBATCH --partition=SOE_main   # partition (queue)
#SBATCH -t 0-2:00              # time limit: (D-HH:MM) 
#SBATCH --mem=32000            # memory per node in MB 
#SBATCH --nodes=1              # number of nodes
#SBATCH --ntasks-per-node=16   # number of cores
#SBATCH --output=slurm.out     # file to collect standard output
#SBATCH --error=slurm.err      # file to collect standard errors

If the time limit is not specified in the submit script, SLURM will assign the default run time, 3 days. This means the job will be terminated by SLURM in 72 hrs. The maximum allowed run time is two weeks, 14-0:00.
If the memory limit is not requested, SLURM will assign the default 16 GB. The maximum allowed memory per node is 128 GB. To see how much RAM per node your job is using, you can run commands sacct or sstat to query MaxRSS for the job on the node - see examples below.
Depending on a type of application you need to run, the submit script may contain commands to create a temporary space on a computational node - see the discussion about using the file systems on the cluster.
Then it sets the environment specific to the application and starts the application on one or multiple nodes - see sbatch sample scripts in directory /usr/local/Samples on soemaster1.hpc.rutgers.edu.
You can submit your job to the cluster with sbatch command:

sbatch myscript.sh

3. Query job information
List all currently submitted jobs in running and pending states for a user:

squeue -u <username>

Command squeue can be run with format options to expose specific information, for example, when pending job #706 is scheduled to start running:

squeue -j 706 --format="%S"

START_TIME
2015-04-30T09:54:32

More info can be shown by placing additional format options, for example:

squeue -j 706 --format="%i %P %j %u %T %l %C %S"

JOBID PARTITION   NAME    USER STATE   TIMELIMIT  CPUS START_TIME
706   SOE_main  Par_job_3 mike PENDING 3-00:00:00 64   2015-04-30T09:54:32

To see when all the jobs, pending in the queue, are scheduled to start:

squeue --start 

List all running and completed jobs for a user

sqlog -u <username>

or

sqlog -j <JobID>

The following appreviations are used for the job states:

       CA   CANCELLED      Job was cancelled.

       CD   COMPLETED      Job completed normally.

       CG   COMPLETING     Job is in the process of completing.

       F    FAILED         Job termined abnormally.

       NF   NODE_FAIL      Job terminated due to node failure.

       PD   PENDING        Job is pending allocation.

       R    RUNNING        Job currently has an allocation.

       S    SUSPENDED      Job is suspended.

       TO   TIMEOUT        Job terminated upon reaching its time limit.

You can specify the fields you would like to see in the output of sqlog:

sqlog --format=list

The command below, for example, provides Job ID, user name, exit state, start date-time, and end date-time for job #2831:

sqlog -j 2831 --format=jid,user,state,start,end

List status info for a currently running job:

sstat -j <jobid>

A formatted output can be used to gain only a specific info, for example, the maximum resident RAM usage on a node:

sstat --format="JobID,MaxRSS" -j <jobid>

To get statistics on completed jobs by jobID:

sacct --format="JobID,JobName,MaxRSS,Elapsed" -j <jobid>

To view the same information for all jobs of a user:

sacct --format="JobID,JobName,MaxRSS,Elapsed" -u <username>

To print a list of fields that can be specified with the --format option:

sacct --helpformat

For example, to get Job ID, Job name, Exit state, start date-time, and end date-time for job #2831:

sacct -j 2831 --format="JobID,JobName,State,Start,End"

Another useful command to gain information about a running job is scontrol:

scontrol show job=<jobid>

4. Cancel a job
To cancel one job:

scancel <jobid>

To cancel one job and delete the TMP directory created by the submit script on a node:

sdel <jobid>

To cancel all the jobs for a user:

scancel -u <username>

To cancel one or more jobs by name:

scancel --name <myJobName>

Address of the bookmark: http://www.biotnet.org/training-materials/python-programmers

Back in August, van Rossum published a proposal on the Python mailing list recommending type-checking annotations as a valuable feature for the next version of Python to improve the performance of editors and IDEs, linter capabilities, standard notation, and refactoring. Van Rossum’s latest proposal, posted late last month, outlined plans to publish a Python Enhancement Proposal (PEP) in early January to put the feature now known as type hinting on track for inclusion in Python 3.5, slated for release this September.

Reference

https://quip.com/r69HA9GhGa7J

ICRISAT is headquartered in Patancheru near Hyderabad, India, with two regional hubs and five country offices in sub-Saharan Africa. ICRISAT, established in 1972, is a member of the CGIAR Consortium. For more details, see www.icrisat.org.

Responsibilities:Design efficient SQL queries for pulling large sequencing projects.
Serve as a technical adviser to the project leadership and provide computational perspective on product design and deliverability.
Develop and oversee a rapid and incremental software development and release schedule.
Design the software architecture, oversee the implementation and evolution of the design on appropriate hardware platforms.
Working collaboratively in a team environment to design, code, test, debug, and document programs for an integrated genomic analysis pipeline in a rapid and incremental software development and release schedule.
Supervise and review code development and ensure that software products meet project objectives in terms of functionality, scalability, robustness and user experience.
Implement and oversee the QA/QC practices to ensure the development team is adhering to quality standards.
Work closely with the application specialist to integrate feedbacks from teams in each CGIAR center into software customization and improvement.
Assist in training of breeders in the CGIAR centers to use software developed.
Personal Profile:

The applicant should have:

Understanding of genomics data and advanced knowledge of Java, and C/C++ as the programming languages and any of the scripting language like perl and/or Python, SQL
High Performance Computing, data architecture, database platforms and QA/QC practices in software engineering.
She/he should have solid experience in software development projects, preferably as a senior programmer or in the software project management role, and in projects involving big data.
Excellent communication skills are needed to work in this multi-disciplinary, multi-location and multi-cultural team.
Ability to mentor colleagues in quality software development practices is desired.
Educational Qualification : Ph. D or Masters Degree in Computational Biology / Computational Genomics or Equivalent with Research Experience in Mentioned Areas.

More at http://www.icrisat.org/careers/

The primary home page for DendroPy, with detailed tutorials and documentation, is at:

http://dendropy.org/

DendroPy is also hosted in the official Python repository:

http://packages.python.org/DendroPy/

Address of the bookmark: https://pypi.org/project/DendroPy/

What Is Julia Language?

Julia is a programming language that came into the limelight in 2012. It is a general-purpose programming language that was designed for solving scientific computations. Julia was meant to be an alternative to Python, R and other programming languages that were mainly used for manipulating data. This is because it has numerous features that can minimize the complexities of numerical computations. 

Julia optimizes on the best features of Python and R while at the same time overlooks their weaknesses. This explains why it is viewed as an alternative to these programming languages. For instance, it utilizes the readability and simplicity of Python then performs faster.

Julia is the most preferred programming language for data scientists and mathematicians. This is because its core features are similar to the ones that are used on most data software. Also, the language is ideal for these two subjects because its syntax is similar to the standard mathematical formulas.

Key Features Of Julia Language
Uses JIT Compilation
Parallelism
Dynamic Typing
Simple Syntax
Allows Metaprogramming
Accessible to Libraries
-1-Array Indexing

Julia Vs Python And R Programming Languages
1. Speed
Julia is faster than both Python and R. This is a very critical aspect that is given special attention in the big data programming. The high speed of Julia is because of JIT compilers. You will need to install external libraries on Python to achieve similar speed.

2. Syntax
Julia has a math-friendly syntax. The syntax of this programming language is similar to the mathematical formulas hence can be used to perform mathematical and scientific computations. This syntax makes it easier to learn than Python.

3. Parallelism
Although both Python and R use parallelism, Julia uses a top-level parallelism. Julia allows the processor to perform to the optimum level than what Python and R can achieve.

4. Versatility
Julia programming language is more versatile than Python and R. It allows a programmer to move from different codes and functions with ease.

The only area that Python and R are superior to Julia is in terms of community. Given that Julia is a new programming language, it has a small community as compared to others which have been around for years.

In overall Julia programming language is a better alternative that you can use to handle Big data projects. Despite having a small community, it is one of those programming languages that you can easily learn.