BOL: Related items

Gooey: Turn (almost) any Python command line program into a full GUI application with one line

BioStar — Fri, 01 Nov 2019 00:29:27 -0500

Turn (almost) any Python command line program into a full GUI application with one line

The easiest way to install Gooey is via pip

pip install Gooey

Alternatively, you can install Gooey by cloning the project to your local directory

git clone https://github.com/chriskiehl/Gooey.git

run setup.py

python setup.py install

Address of the bookmark: https://github.com/chriskiehl/Gooey

CrossMap: program for genome coordinates conversion between different assemblies

Rahul Nayak — Tue, 25 Jan 2022 17:59:32 -0600

CrossMap is a program for genome coordinates conversion between different assemblies (such as hg18 (NCBI36) <=> hg19 (GRCh37)). It supports commonly used file formats including BAM, CRAM, SAM, Wiggle, BigWig, BED, GFF, GTF, MAF VCF, and gVCF.

Address of the bookmark: http://crossmap.sourceforge.net/

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

ARCS: scaffolding genome drafts with linked reads

Rahul Nayak — Tue, 06 Mar 2018 16:35:26 -0600

ARCS, an application that utilizes the barcoding information contained in linked reads to further organize draft genomes into highly contiguous assemblies. We show how the contiguity of an ABySS H.sapiensgenome assembly can be increased over six-fold, using moderate coverage (25-fold) Chromium data. We expect ARCS to have broad utility in harnessing the barcoding information contained in linked read data for connecting high-quality sequences in genome assembly drafts.

Address of the bookmark: https://github.com/bcgsc/ARCS/

pbalign: maps PacBio reads to reference sequences and saves alignments to a BAM file

Jit — Thu, 24 May 2018 10:06:52 -0500

pbalign aligns PacBio reads to reference sequences, filters aligned reads according to user-specific filtering criteria, and converts the output to either the SAM format or PacBio Compare HDF5 (e.g., .cmp.h5) format. The output Compare HDF5 file will be compatible with Quiver if --forQuiver option is specified.

Address of the bookmark: https://github.com/PacificBiosciences/pbalign

P_RNA_scaffolder: a fast and accurate genome scaffolder using paired-end RNA-sequencing reads

Jit — Tue, 12 Jun 2018 08:14:41 -0500

P_RNA_scaffolder, a fast and accurate tool using paired-end RNA-sequencing reads to scaffold genomes. This tool aims to improve the completeness of both protein-coding and non-coding genes. After this tool was applied to scaffolding human contigs, the structures of both protein-coding genes and circular RNAs were almost completely recovered and equivalent to those in a complete genome, especially for long proteins and long circular RNAs.

Address of the bookmark: http://www.fishbrowser.org/software/P_RNA_scaffolder/

LR_Gapcloser: a tiling path-based gap closer that uses long reads to complete genome assembly

Rahul Nayak — Thu, 14 May 2020 15:09:52 -0500

LR_Gapcloser is a gap closing tool using long reads from studied species. The long reads could be downloaed from public read archive database (for instance, NCBI SRA database ) or be your own data. Then they are fragmented and aligned to scaffolds using BWA mem algorithm in BWA package. In the package, we provided a compiled bwa, so the user needn't to install bwa. LR_Gapcloser uses the alignments to find the bridging that cross the gap, and then fills the long read original sequence into the genomic gaps.

Address of the bookmark: https://github.com/CAFS-bioinformatics/LR_Gapcloser

LRCstats: a tool for evaluating long reads correction methods

Aaryan Lokwani — Wed, 22 Aug 2018 11:05:04 -0500

LRCstats is an open-source pipeline for benchmarking DNA long read correction algorithms for long reads outputted by third generation sequencing technology such as machines produced by Pacific Biosciences. The reads produced by third generation sequencing technology, as the name suggests, are longer in length than reads produced by next generation sequencing technologies, such as those produced by Illumina. However, long reads are plagued by high error rates, which can cause issues in downstream analysis. Long read correction algorithms reduce the error rate of long reads either through self-correcting methods or using accurate, short reads outputted by next generation sequencing technologies to correct long reads.

Address of the bookmark: https://github.com/cchauve/lrcstats

Rainbow: an integrated tool for efficient clustering and assembling RAD-seq reads

Rahul Nayak — Fri, 19 Oct 2018 08:23:42 -0500

Rainbow is developed to provide an ultra-fast and memory-efficient solution to clustering and assembling short reads produced by RAD-seq. First, Rainbow clusters reads using a spaced seed method. Then, Rainbow implements a heterozygote calling like strategy to divide potential groups into haplotypes in a top–down manner. And along a guided tree, it iteratively merges sibling leaves in a bottom–up manner if they are similar enough. Here, the similarity is defined by comparing the 2nd reads of a RAD segment. This approach tries to collapse heterozygote while discriminate repetitive sequences. At last, Rainbow uses a greedy algorithm to locally assemble merged reads into contigs. Rainbow not only outputs the optimal but also suboptimal assembly results. Based on simulation and a real guppy RAD-seq data, we show that Rainbow is more competent than the other tools in dealing with RAD-seq data

Address of the bookmark: https://sourceforge.net/projects/bio-rainbow/files/

ARCS: scaffolding genome drafts with linked reads

Jit — Mon, 17 Dec 2018 17:40:28 -0600

ARCS requires two input files:

Draft assembly fasta file
Interleaved linked reads file (Barcode sequence expected in the BX tag of the read header or in the form "@readname_barcode" ; Run Long Ranger basic on raw chromium reads to produce this interleaved file)

Address of the bookmark: https://github.com/bcgsc/ARCS/