BOL: Related items

Oxford Nanopore Sequencing, Hybrid Error Correction, and de novo Assembly of a Eukaryotic Genome

Jit — Wed, 29 Nov 2017 05:08:53 -0600

Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available that we used for sequencing the S. cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr (https://github.com/jgurtowski/nanocorr) specifically for Oxford Nanopore reads, as existing packages were incapable of assembling the long read lengths (5-50kbp) at such high error rate (between ~5 and 40% error). With this new method we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: the contig N50 length is more than ten-times greater than an Illumina-only assembly (678kb versus 59.9kbp), and has greater than 99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

Address of the bookmark: http://schatzlab.cshl.edu/data/nanocorr/

MeDuSa: a multi-draft based scaffolder

Abhimanyu Singh — Wed, 14 Feb 2018 02:49:00 -0600

MeDuSa (Multi-Draft based Scaffolder), an algorithm for genome scaffolding. MeDuSa exploits information obtained from a set of (draft or closed) genomes from related organisms to determine the correct order and orientation of the contigs. MeDuSa formalises the scaffolding problem by means of a combinatorial optimisation formulation on graphs and implements an efficient constant factor approximation algorithm to solve it. In contrast to currently used scaffolders, it does not require either prior knowledge on the microrganisms dataset under analysis (e.g. their phylogenetic relationships) or the availability of paired end read libraries.

Address of the bookmark: https://github.com/combogenomics/medusa

Ranbow: a haplotype assembler for polyploid genomes

Jit — Fri, 01 Jun 2018 07:21:54 -0500

Ranbow is a haplotype assembler for polyploid genomes. It has been developed for the haplotype assembly of the hexaploid sweet potato genome, which is highly heterozygous. Ranbow can also be applied to other polyploid genomes. After a first phasing, Ranbow utilizes the assembled haplotypes to improve the accuracy of variant calling results and to infer the evolutionary history of the organism´s genome. Ranbow has three main modes of function: ranbow hap: for haplotyping ranbow eval: for evaluating of the assemble haplotypes by gold standard (long) reads ranbow phylo: for the phylogenetic analysis

Address of the bookmark: https://www.molgen.mpg.de/ranbow

Phased Human Genome Assembly !

Rahul Nayak — Mon, 08 Oct 2018 09:10:54 -0500

The new publicly available assembly (PacBio HG00733) has the fewest gaps of any human genome assembly, with more than half of the genome contained in gapless sequence at least 27 Mb long. The primary contig assembly is 2.89 Gb long and consists of 865 contigs that were assembled with PacBio data generated with the company’s Sequel® System. Using the FALCON-Unzip assembler, maternal and paternal haplotypes were resolved over more than 80% of the genome. Maternal and paternal haplotype blocks were then further phased using Hi-C technology and the FALCON-Phase methoddeveloped in collaboration with Phase Genomics. The genome was then de novo scaffolded using Phase Genomics’ Proximo Hi-C platform, resulting in the first chromosome-scale diploid assembly of a single individual accomplished with only two technologies. More specific details about the assembly are included on the PacBio blog.

The data are available using NCBI accession IDs: BioProject: (PRJNA483067), assembly: [RBJD00000000] and sequence data (SRP155659).

Additional Resources

Interactive map showcasing global initiatives underway to generate reference-quality human genome assemblies for diverse populations
BioReport Podcast on the value of ethnic-specific reference genomes
Nature Reviews Genetics paper from NHGRI: Prioritizing diversity in human genomics research
Article in The Journal of Precision Medicine: “Minority Report – Ethnic Diversity and the Real Promise for Precision Medicine”
Article in Bio-IT World: “Genomic Data Standards Are a Necessity”
NHGRI Project Award: High Quality Human and Non-Human Primate Genome Assemblies

More details are available on the PacBio website:

Blog post: Data Release: Highest-Quality, Most Contiguous Individual Human Genome Assembly to Date
Blog post: For Reference-Grade Human Genome Assemblies, SMRT Sequencing Yields Optimal Results
Webinar: Assembling High-Quality Human Reference Genomes for Global Populations
FALCON-Phase press release and article preprint
PacBio research focus webpage about Human Population Genetics

Ref: https://stockguru.com/2018/10/08/pacific-biosciences-releases-highest-quality-most-contiguous-individual-human-genome-assembly-to-date/

RaGOO: Fast Reference-Guided Scaffolding of Genome Assembly Contigs

BioJoker — Wed, 17 Apr 2019 19:45:22 -0500

Alonge M, Soyk S, Ramakrishnan S, Wang X, Goodwin S, Sedlazeck FJ, Lippman ZB, Schatz MC: Fast and accurate reference-guided scaffolding of draft genomes. bioRxiv 2019.

RaGOO is a tool for coalescing genome assembly contigs into pseudochromosomes via minimap2 alignments to a closely related reference genome. The focus of this tool is on practicality and therefore has the following features:

Good performance. On a MacBook Pro using Arabidopsis data, pseudochromosome construction takes less than a minute and the whole pipeline with SV calling takes ~2 minutes.
Intact ordering and orienting of contigs.
Chimeric contig correction
GFF lift-over
Structural variant calling with and integrated version of Assemblytics
Confidence scores associated with the grouping, localization, and orientation for each contig.

Address of the bookmark: https://github.com/malonge/RaGOO

Apollo: A Sequencing-Technology-Independent, Scalable, and Accurate Assembly Polishing Algorithm

BioStar — Mon, 16 Mar 2020 10:09:26 -0500

Apollo is an assembly polishing algorithm that attempts to correct the errors in an assembly. It can take multiple set of reads in a single run and polish the assemblies of genomes of any size. Described by Firtina et al. (preliminary version at https://arxiv.org/pdf/1902.04341.pdf

More at https://academic.oup.com/bioinformatics/advance-article/doi/10.1093/bioinformatics/btaa179/5804978?rss=1

Address of the bookmark: https://github.com/CMU-SAFARI/Apollo

MitoFinder

Neel — Tue, 29 Aug 2023 02:13:01 -0500

Allio, R., Schomaker-Bastos, A., Romiguier, J., Prosdocimi, F., Nabholz, B., & Delsuc, F. (2020) Mol Ecol Resour. 20, 892-905. (publication link)

Mitofinder is a pipeline to assemble mitochondrial genomes and annotate mitochondrial genes from trimmed read sequencing data.

MitoFinder is also designed to find and annotate mitochondrial sequences in existing genomic assemblies (generated from Hifi/PacBio/Nanopore/Illumina sequencing data...)

MitoFinder is distributed under the license.

Address of the bookmark: https://github.com/RemiAllio/MitoFinder

Peregrine & SHIMMER Genome Assembly Toolkit

Abhi — Thu, 16 Dec 2021 02:50:19 -0600

Peregrine is a fast genome assembler for accurate long reads (length > 10kb, accuracy > 99%). It can assemble a human genome from 30x reads within 20 cpu hours from reads to polished consensus. It uses Sparse HIereachical MimiMizER (SHIMMER) for fast read-to-read overlaping without quadratic comparisions used in other OLC assemblers.

Address of the bookmark: https://github.com/cschin/Peregrine

CLAW: Chloroplast Long-read Assembly Workflow

LEGE — Wed, 21 Feb 2024 12:37:46 -0600

CLAW (Chloroplast Long-read Assembly Workflow) is an mostly-automated Snakemake-based workflow for the assembly of chloroplast genomes. CLAW uses chloroplast long-reads, which are baited out of larger read libraries (e.g., an Oxford Nanopore Technologies MinION read library derived from photosynthetic tissue), for assembly with Flye and/or Unicycler. CLAW was designed with the novice bioinformatician in mind - it is easy to install and easy to use, requiring only minimal user input.

Address of the bookmark: https://github.com/aaronphillips7493/CLAW

Mike Ritchie Lab

Wed, 02 Oct 2013 15:25:45 -0500

Mike Ritchie Lab primary research focus is the detection of susceptibility genes for common diseases such as cancer, diabetes, hypertension, and cardiovascular disease, among others. The approaches will involve the development and application of new statistical methods with a focus on the detection of gene-gene interactions associated with human disease.

Gene expression and protein expression patterns between normal and non-normal tissues is a growing area of research that may lead to the identification of candidate genes for understanding the etiology of common, complex diseases.

Lab homepage @ http://ritchielab.psu.edu/ritchielab/