BOL: Related items

Circlator: automated circularization of genome assemblies using long sequencing reads

Poonam Mahapatra — Tue, 15 May 2018 09:42:32 -0500

A tool to circularize genome assemblies. The algorithm and benchmarks are described in the Genome Biology manuscript. Citation: "Circlator: automated circularization of genome assemblies using long sequencing reads", Hunt et al, Genome Biology 2015 Dec 29;16(1):294. doi: 10.1186/s13059-015-0849-0. PMID: 26714481.

Address of the bookmark: http://sanger-pathogens.github.io/circlator/

ARC: pipeline which facilitates iterative, reference guided de novo assemblies

Jit — Thu, 26 Jul 2018 09:20:26 -0500

ARC is a pipeline which facilitates iterative, reference guided de novo assemblies with the intent of:

Reducing time in analysis and increasing accuracy of results by only considering those reads which should assemble together.
Reducing/removing reference bias as compared to mapping based approaches.

The software is designed to work in situations where a whole-genome assembly is not the objective, but rather when the researcher wishes to assemble discreet 'targets' contained within next-generation shotgun sequence data. ARC decomplexifies the traditionally difficult problem of assembly by breaking the reads into small, manageable subsets which can then be assembled quickly and efficiently in parallel. Applications include those in which the researcher wishes to de novo assemble specific content and a set of semi-similar reference targets is available to initialize the assembly process.

https://ibest.github.io/ARC/

Address of the bookmark: https://ibest.github.io/ARC/

SKESA: strategic k-mer extension for scrupulous assemblies

Jit — Wed, 14 Nov 2018 04:45:41 -0600

SKESA is a DeBruijn graph-based de-novo assembler designed for assembling reads of microbial genomes sequenced using Illumina. Comparison with SPAdes and MegaHit shows that SKESA produces assemblies that have high sequence quality and contiguity, handles low-level contamination in reads, is fast, and produces an identical assembly for the same input when assembled multiple times with the same or different compute resources.

Source code for SKESA is freely available at https://github.com/ncbi/SKESA/releases.

Research Paper @ Link

SKESA algorithm are as follows:

Address of the bookmark: https://github.com/ncbi/SKESA/releases

Hawkeye: an interactive visual analytics tool for genome assemblies

Abhimanyu Singh — Tue, 01 Jan 2019 11:56:17 -0600

Genome sequencing remains an inexact science, and genome sequences can contain significant errors if they are not carefully examined. Hawkeye is our new visual analytics tool for genome assemblies, designed to aid in identifying and correcting assembly errors. Users can analyze all levels of an assembly along with summary statistics and assembly metrics, and are guided by a ranking component towards likely mis-assemblies. Hawkeye is freely available and released as part of the open source AMOS project http://amos.sourceforge.net/hawkeye.

https://genomebiology.biomedcentral.com/articles/10.1186/gb-2007-8-3-r34

Address of the bookmark: http://amos.sourceforge.net/wiki/index.php?title=Hawkeye

CrossMap: program for genome coordinates conversion between different assemblies

Rahul Nayak — Tue, 25 Jan 2022 17:59:32 -0600

CrossMap is a program for genome coordinates conversion between different assemblies (such as hg18 (NCBI36) <=> hg19 (GRCh37)). It supports commonly used file formats including BAM, CRAM, SAM, Wiggle, BigWig, BED, GFF, GTF, MAF VCF, and gVCF.

Address of the bookmark: http://crossmap.sourceforge.net/

Meraculous: De Novo Genome Assembly with Short Paired-End Reads

Jit — Tue, 07 Nov 2017 04:36:10 -0600

We describe a new algorithm, meraculous, for whole genome assembly of deep paired-end short reads, and apply it to the assembly of a dataset of paired 75-bp Illumina reads derived from the 15.4 megabase genome of the haploid yeast Pichia stipitis. More than 95% of the genome is recovered, with no errors; half the assembled sequence is in contigs longer than 101 kilobases and in scaffolds longer than 269 kilobases. Incorporating fosmid ends recovers entire chromosomes. Meraculous relies on an efficient and conservative traversal of the subgraph of the k-mer (deBruijn) graph of oligonucleotides with unique high quality extensions in the dataset, avoiding an explicit error correction step as used in other short-read assemblers. A novel memory-efficient hashing scheme is introduced. The resulting contigs are ordered and oriented using paired reads separated by ∼280 bp or ∼3.2 kbp, and many gaps between contigs can be closed using paired-end placements. Practical issues with the dataset are described, and prospects for assembling larger genomes are discussed.

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3158087/

Tools for bacterial whole genome annotation

Radha Agarkar — Sat, 16 Dec 2017 17:37:47 -0600

RAST – Web tool (upload contigs), uses the subsystems in the SEED database and provides detailed annotation and pathway analysis. Takes several hours per genome but I think this is the best way to get a high quality annotation (if you have only a few genomes to annotate).

Prokka – Standalone command line tool, takes just a few minutes per genome. This is the best way to get good quality annotation in a flash, which is particularly useful if you have loads of genomes or need to annotate a pangenome or metagenome. Note however that the quality of functional information is not as good as RAST, and you will need several extra steps if you want to do functional profiling and pathway analysis of your genome(s)… which is in-built in RAST.

NCBI Prokaryotic Genome Annotation Pipeline is designed to annotate bacterial and archaeal genomes (chromosomes and plasmids).

Genome annotation is a multi-level process that includes prediction of protein-coding genes, as well as other functional genome units such as structural RNAs, tRNAs, small RNAs, pseudogenes, control regions, direct and inverted repeats, insertion sequences, transposons and other mobile elements.

PGAP: NCBI has developed an automatic prokaryotic genome annotation pipeline that combines ab initio gene prediction algorithms with homology based methods. The first version of NCBI Prokaryotic Genome Automatic Annotation Pipeline (PGAAP; see Pubmed Article) developed in 2005 has been replaced with an upgraded version that is capable of processing a larger data volume. NCBI's annotation pipeline depends on several internal databases and is not currently available for download or use outside of the NCBI environment.

BEACON (automated tool for Bacterial GEnome Annotation ComparisON), a fast tool for an automated and a systematic comparison of different annotations of single genomes. The extended annotation assigns putative functions to many genes with unknown functions. BEACON is available under GNU General Public License version 3.0 and is accessible at: http://www.cbrc.kaust.edu.sa/BEACON/.

BlastKOLA: Assigns K numbers to the user's sequence data by BLAST searches, respectively, against a nonredundant set of KEGG GENES. KOALA (KEGG Orthology And Links Annotation) is KEGG's internal annotation tool for K number assignment of KEGG GENES using SSEARCH computation. Annotate Sequence in KEGG Mapper and Pathogen Checker in KEGG Pathogen are special interfaces to this server and can be executed in an interactive mode. BlastKOALA is suitable for annotating fully sequenced genomes.

PAGIT: Provides a toolkit for improving the quality of genome assemblies created via an assembly software. PAGIT compiled four tools: (i) ABACAS which classifies and orientates contigs and estimates the sizes of gaps between them; (ii) IMAGE uses paired-end reads to extend contigs and close gaps within the scaffolds; (iii) ICORN for identifying and correcting small errors in consensus sequences and; (iv) RATT for help annotation. The software was mainly created to analyze parasite genomes of up to about 300 Mb.

MAKER: A portable and easily configurable genome annotation pipeline. MAKER allows smaller eukaryotic and prokaryotic genome projects to independently annotate their genomes and to create genome databases. It identifies repeats, aligns ESTs and proteins to a genome, produces ab-initio gene predictions and automatically synthesizes these data into gene annotations having evidence-based quality values. MAKER's inputs are minimal and its ouputs can be directly loaded into a Generic Model Organism Database (GMOD). They can also be viewed in the Apollo genome browser; this feature of MAKER provides an easy means to annotate, view and edit individual contigs and BACs without the overhead of a database. MAKER is available for download and can be tested online via the MAKER Web Annotation Service (MWAS).

MyPro is a software pipeline for high-quality prokaryotic genome assembly and annotation. It was validated on 18 oral streptococcal strains to produce submission-ready, annotated draft genomes. MyPro installed as a virtual machine and supported by updated databases will enable biologists to perform quality prokaryotic genome assembly and annotation with ease.

List of visualization tools for genome alignments

Rahul Nayak — Fri, 02 Feb 2018 13:25:33 -0600

Genome browsers are useful not only for showing final results but also for improving analysis protocols, testing data quality, and generating result drafts. Its integration in analysis pipelines allows the optimization of parameters, which leads to better results. But sometime, we need publication ready figure of genomes. Following are the list of genome alignment visualization tools, which could be useful for analysis and interpretation of results:

ABySS Explorer

Interactive Java application that uses a novel graph-based representation to display a sequence assembly and associated metadata

http://www.bcgsc.ca/platform/bioinfo/software/abyss-explorer

BamView

Genome browser and annotation tool that allows visualization of sequence features, next-generation sequencing (NGS) data and the results of analyses within the context of the sequence, and also its six-frame translation

http://www.sanger.ac.uk/resources/software/artemis/

DNannotator

Annotation web toolkit for regional genomic sequences

http://bioapp.psych.uic.edu/DNannotator.htm

JVM

Java Visual Mapping tool for NGS reads

http://www.springer.com/cda/content/document/cda_downloaddocument/9789401792448-c2.pdf?SGWID=0-0-45-1487072-p176815501

LookSeq

Web-based visualization of sequences derived from multiple sequencing technologies. Low- or high-depth read pileups and easy visualization of putative single nucleotide and structural variation

http://lookseq.sourceforge.net

MagicViewer

Visualization of short read alignment, identification of genetic variation and association with annotation information of a reference genome

http://bioinformatics.zj.cn/magicviewer/

MapView

Alignments of huge-scale single-end and pair-end short reads

http://omictools.com/mapview-s1367.html

MultiPipMaker

Computes alignments of similar regions in two DNA sequences. The resulting alignments are summarized with a ‘percent identity plot’ (pip)

http://pipmaker.bx.psu.edu/pipmaker/

PileLineGUI

Handling genome position files in NGS studies

http://sing.ei.uvigo.es/pileline/pilelinegui.html

SAMtools tview

Simple and fast text alignment viewer; NGS compatible

http://www.htslib.org/

SEWAL

Uses a locality-sensitive hashing algorithm to enumerate all unique sequences in an entire Illumina sequencing run

http://www.sourceforge.net/projects/sewal

STAR

A web-based integrated solution to management and visualization of sequencing data

http://wanglab.ucsd.edu/star/browser

SVA

Software for annotating and visualizing sequenced human genomes

http://www.svaproject.org

Viewer (IGV)

Visualization of large heterogeneous datasets, providing a smooth and intuitive user experience at all levels of genome resolution

https://www.broadinstitute.org/igv/

ZOOM Lite

NGS data mapping and visualization software

http://bioinfor.com/zoom/lite/

mScaffolder: A comparative genome scaffolding tool

Jit — Fri, 15 Jun 2018 04:48:01 -0500

A comparative genome scaffolding tool based on MUMmer

mScaffolder scaffolds a genome using an existing high quality genome as the reference. It aligns the two genomes using nucmer utility from MUMmer and then orders and orients the contigs of the candidate genome guided by their alignments to the reference genome. Please send your questions and comments to mchakrab@uci.edu.

Citation https://www.nature.com/articles/s41588-017-0010-y

Address of the bookmark: https://github.com/mahulchak/mscaffolder

Genome U-Plot: a whole genome visualization

Rahul Nayak — Fri, 13 Jul 2018 19:50:41 -0500

Genome U-Plot for producing clear and intuitive graphs that allows researchers to generate novel insights and hypotheses by visualizing SVs such as deletions, amplifications, and chromoanagenesis events. The main features of the Genome U-Plot are its layered layout, its high spatial resolution and its improved aesthetic qualities.

https://github.com/gaitat/GenomeUPlot

Address of the bookmark: https://github.com/gaitat/GenomeUPlot