BOL: Related items

Short-read assembly using Spades !

Abhimanyu Singh — Mon, 31 Jan 2022 07:18:16 -0600

If we only had Illumina reads, we could also assemble these using the tool Spades.

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

illumina_R1.fastq.gz: the Illumina forward reads
illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

-1 is input file of forward reads
-2 is input file of reverse reads
--careful minimizes mismatches and short indels
--cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
-o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

Mitochondrial genome assembly tools !

Abhi — Wed, 06 Sep 2023 00:37:18 -0500

Mitochondrial genome assembly tools are specialized software and algorithms designed to accurately reconstruct the mitochondrial genome (mitogenome) from sequencing data, typically obtained through techniques like next-generation sequencing (NGS). The mitochondrial genome is relatively small compared to the nuclear genome, making it an ideal target for assembly. Here are some commonly used mitochondrial genome assembly tools:

MitoFinder: Mitofinder is a pipeline to assemble mitochondrial genomes and annotate mitochondrial genes from trimmed read sequencing data.

MitoHiFi: a python pipeline for mitochondrial genome assembly from PacBio high fidelity reads

MITObim: MITObim is a tool specifically developed for the iterative assembly of mitochondrial genomes. It starts with a reference mitogenome and iteratively refines the assembly using the read data.

MITOS: MITOS is a web-based platform that provides a pipeline for annotating mitochondrial genomes. It integrates multiple software tools for assembly, annotation, and visualization of mitogenomes.

MIRA: MIRA (Mimicking Intelligent Read Assembly) is a versatile genome assembly tool that can be used for mitochondrial genome assembly. It supports various sequencing technologies and allows for reference-based or de novo assembly.

NOVOPlasty: NOVOPlasty is a user-friendly tool designed for de novo assembly of organelle genomes, including mitochondria. It utilizes a seed-and-extend algorithm and is suitable for both short-read and long-read data.

MITOS2: MITOS2 is an updated version of the MITOS pipeline, which automates the annotation of mitochondrial genomes. It provides improved accuracy and additional features for mitochondrial genome analysis.

GetOrganelle: While primarily designed for chloroplast genome assembly, GetOrganelle can also be used for mitochondrial genome assembly. It is particularly useful for dealing with high-throughput sequencing data.

SPAdes: SPAdes (St. Petersburg genome assembler) is a versatile genome assembly tool that can be employed for mitochondrial genome assembly, especially when dealing with complex datasets that may contain nuclear mitochondrial DNA sequences (numts).

IDBA-UD: IDBA-UD (Iterative De Bruijn Graph De Novo Assembler) is another de novo assembly tool that can be used for mitochondrial genome assembly, especially in cases with relatively low coverage.

Velvet: Velvet is a de novo assembly tool that can be applied to mitochondrial genome assembly, especially when working with short-read data.

When selecting a mitochondrial genome assembly tool, it's important to consider the specific characteristics of your sequencing data, such as read length and coverage, as well as the complexity of the mitochondrial genome. Additionally, some tools are better suited for specific organisms or research objectives, so choosing the right tool will depend on your particular project requirements.

npScarf: Scaffolding and Completing Assemblies in Real-time Fashion

Jit — Tue, 23 May 2017 04:53:29 -0500

npScarf (jsa.np.npscarf) is a program that scaffolds and completes draft genomes assemblies in real-time with Oxford Nanopore sequencing. The pipeline can run on a computing cluster as well as on a laptop computer for microbial datasets. It also facilitates the real-time analysis of positional information such as gene ordering and the detection of genes from mobile elements (plasmids and genomic islands).

Complete paper at https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5321748/

Address of the bookmark: https://github.com/mdcao/npScarf

WAAFLE: a Workflow to Annotate Assemblies and Find LGT Events.

Neel — Thu, 23 Sep 2021 14:31:06 -0500

Lateral gene transfer (LGT) is an important mechanism for genome diversification in microbial communities, including the human microbiome. While methods exist to identify LGTs from sequenced isolate genomes, identifying LGTs from community metagenomes remains an open problem. To address this, we developed WAAFLE: a Workflow to Annotate Assemblies and Find LGT Events.

Address of the bookmark: http://huttenhower.sph.harvard.edu/waafle

Circlator: automated circularization of genome assemblies using long sequencing reads

Poonam Mahapatra — Tue, 15 May 2018 09:42:32 -0500

A tool to circularize genome assemblies. The algorithm and benchmarks are described in the Genome Biology manuscript. Citation: "Circlator: automated circularization of genome assemblies using long sequencing reads", Hunt et al, Genome Biology 2015 Dec 29;16(1):294. doi: 10.1186/s13059-015-0849-0. PMID: 26714481.

Address of the bookmark: http://sanger-pathogens.github.io/circlator/

ARC: pipeline which facilitates iterative, reference guided de novo assemblies

Jit — Thu, 26 Jul 2018 09:20:26 -0500

ARC is a pipeline which facilitates iterative, reference guided de novo assemblies with the intent of:

Reducing time in analysis and increasing accuracy of results by only considering those reads which should assemble together.
Reducing/removing reference bias as compared to mapping based approaches.

The software is designed to work in situations where a whole-genome assembly is not the objective, but rather when the researcher wishes to assemble discreet 'targets' contained within next-generation shotgun sequence data. ARC decomplexifies the traditionally difficult problem of assembly by breaking the reads into small, manageable subsets which can then be assembled quickly and efficiently in parallel. Applications include those in which the researcher wishes to de novo assemble specific content and a set of semi-similar reference targets is available to initialize the assembly process.

https://ibest.github.io/ARC/

Address of the bookmark: https://ibest.github.io/ARC/

SKESA: strategic k-mer extension for scrupulous assemblies

Jit — Wed, 14 Nov 2018 04:45:41 -0600

SKESA is a DeBruijn graph-based de-novo assembler designed for assembling reads of microbial genomes sequenced using Illumina. Comparison with SPAdes and MegaHit shows that SKESA produces assemblies that have high sequence quality and contiguity, handles low-level contamination in reads, is fast, and produces an identical assembly for the same input when assembled multiple times with the same or different compute resources.

Source code for SKESA is freely available at https://github.com/ncbi/SKESA/releases.

Research Paper @ Link

SKESA algorithm are as follows:

Address of the bookmark: https://github.com/ncbi/SKESA/releases

Hawkeye: an interactive visual analytics tool for genome assemblies

Abhimanyu Singh — Tue, 01 Jan 2019 11:56:17 -0600

Genome sequencing remains an inexact science, and genome sequences can contain significant errors if they are not carefully examined. Hawkeye is our new visual analytics tool for genome assemblies, designed to aid in identifying and correcting assembly errors. Users can analyze all levels of an assembly along with summary statistics and assembly metrics, and are guided by a ranking component towards likely mis-assemblies. Hawkeye is freely available and released as part of the open source AMOS project http://amos.sourceforge.net/hawkeye.

https://genomebiology.biomedcentral.com/articles/10.1186/gb-2007-8-3-r34

Address of the bookmark: http://amos.sourceforge.net/wiki/index.php?title=Hawkeye

CrossMap: program for genome coordinates conversion between different assemblies

Rahul Nayak — Tue, 25 Jan 2022 17:59:32 -0600

CrossMap is a program for genome coordinates conversion between different assemblies (such as hg18 (NCBI36) <=> hg19 (GRCh37)). It supports commonly used file formats including BAM, CRAM, SAM, Wiggle, BigWig, BED, GFF, GTF, MAF VCF, and gVCF.

Address of the bookmark: http://crossmap.sourceforge.net/

Automatic Filtering, Trimming, Error Removing and Quality Control for fastq data

Rahul Nayak — Mon, 13 Nov 2017 05:10:23 -0600

Automatic Filtering, Trimming, Error Removing and Quality Control for fastq data
AfterQC can simply go through all fastq files in a folder and then output three folders: good, bad and QC folders, which contains good reads, bad reads and the QC results of each fastq file/pair.
Currently it supports processing data from HiSeq 2000/2500/3000/4000, Nextseq 500/550, MiniSeq...and other Illumina 1.8 or newer formats

Address of the bookmark: https://github.com/OpenGene/AfterQC