During the first phase of ENCODE, published in 2007, microarray-based technologies were used to detect regions associated with transcription factors, certain histone modifications and open chromatin within a pre-specified 1% of the human genome.

ENCODE’s second phase saw a switch to sequencing-based technologies, the addition of new assay types and the analysis of functional elements genome-wide, described in a collection of research articles in 2012.

The Encyclopedia paper of ENCODE 3, published in Nature, gives an overview of the various assays that were performed in human and mouse cell lines and tissues and describes a Registry of human and mouse candidate cis-regulatory elements (cCREs).

More at https://www.nature.com/immersive/d42859-020-00027-2/index.html

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

• illumina_R1.fastq.gz: the Illumina forward reads
• illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

• -1 is input file of forward reads
• -2 is input file of reverse reads
• --careful minimizes mismatches and short indels
• --cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
• -o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

MitoFinder: Mitofinder is a pipeline to assemble mitochondrial genomes and annotate mitochondrial genes from trimmed read sequencing data.

MitoHiFi: a python pipeline for mitochondrial genome assembly from PacBio high fidelity reads

MITObim: MITObim is a tool specifically developed for the iterative assembly of mitochondrial genomes. It starts with a reference mitogenome and iteratively refines the assembly using the read data.

MITOS: MITOS is a web-based platform that provides a pipeline for annotating mitochondrial genomes. It integrates multiple software tools for assembly, annotation, and visualization of mitogenomes.

MIRA: MIRA (Mimicking Intelligent Read Assembly) is a versatile genome assembly tool that can be used for mitochondrial genome assembly. It supports various sequencing technologies and allows for reference-based or de novo assembly.

NOVOPlasty: NOVOPlasty is a user-friendly tool designed for de novo assembly of organelle genomes, including mitochondria. It utilizes a seed-and-extend algorithm and is suitable for both short-read and long-read data.

MITOS2: MITOS2 is an updated version of the MITOS pipeline, which automates the annotation of mitochondrial genomes. It provides improved accuracy and additional features for mitochondrial genome analysis.

GetOrganelle: While primarily designed for chloroplast genome assembly, GetOrganelle can also be used for mitochondrial genome assembly. It is particularly useful for dealing with high-throughput sequencing data.

SPAdes: SPAdes (St. Petersburg genome assembler) is a versatile genome assembly tool that can be employed for mitochondrial genome assembly, especially when dealing with complex datasets that may contain nuclear mitochondrial DNA sequences (numts).

IDBA-UD: IDBA-UD (Iterative De Bruijn Graph De Novo Assembler) is another de novo assembly tool that can be used for mitochondrial genome assembly, especially in cases with relatively low coverage.

Velvet: Velvet is a de novo assembly tool that can be applied to mitochondrial genome assembly, especially when working with short-read data.

When selecting a mitochondrial genome assembly tool, it's important to consider the specific characteristics of your sequencing data, such as read length and coverage, as well as the complexity of the mitochondrial genome. Additionally, some tools are better suited for specific organisms or research objectives, so choosing the right tool will depend on your particular project requirements.

We have developed panHiTE, a comprehensive and accurate pipeline for TE detection in large-scale population genomes. It has been successfully applied to hundreds of plant population genomes, demonstrating its effectiveness and scalability.

For detailed instructions, please refer to the panHiTE tutorial.

Address of the bookmark: https://github.com/CSU-KangHu/HiTE

java -Xms2G -Xmx4G -jar GenomeFinisher.jar  \
    -i target_contigs.fasta  \
    -ds alternative_assemblies.fasta -ref reference.fasta  \
    -o outputDirectory

Address of the bookmark: http://gfinisher.sourceforge.net

An algorithmically novel approach to construct a genome graph representation of long-read-based de novo sequence assemblies. We then provide a proof of principle by creating a genome graph of seven ethnically-diverse human genomes.

https://f1000research.com/articles/7-1391/v1

Address of the bookmark: https://github.com/NCBI-Hackathons/NovoGraph

Address of the bookmark: https://github.com/agshumate/Liftoff

https://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-020-6568-2

Address of the bookmark: https://github.com/HuffordLab/GenomeQC