https://github.com/gaitat/GenomeUPlot

Address of the bookmark: https://github.com/gaitat/GenomeUPlot

• Step 1. Run mugsy to get multiple sequence alignment results.
• Step 2 & 3. Extraction of the Coordinates of Core Blocks, Construction of Synteny Blocks and Generating Signed Permutations.
• Step 4. Generate pairwise genome rearrangement scenarios and find repeats at the breakpoints of each rearrangement events.

https://github.com/DanwangJessica/GRSR

Address of the bookmark: https://github.com/DanwangJessica/GRSR

Address of the bookmark: https://github.com/Magdoll/Cogent

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

Once a query gene has been entered, it is displayed in its genomic context in parallel to the genomic context of all its orthologous and paralogous copies in all the other sequenced metazoan genomes. Moreover, Genomicus stores and displays the predicted ancestral genome structure in all the ancestral species within the phylogenetic range of interest.

All the data on extant species displayed in this browser are from Ensembl.

Summary statistics of Genomicus version 105.01: (view species tree in pdf or newick)

Address of the bookmark: https://www.genomicus.bio.ens.psl.eu/genomicus-105.01/cgi-bin/search.pl

With Single Molecule, Real-Time (SMRT) Sequencing, you can access structural variations having a broad range of sizes, types, and GC content with the ability to:

• Uncover missing heritability linked to structural variation
• Unambiguously identify genomic context and variant breakpoints at the sequence level to unravel the genetic etiology of disease
• Resolve structural variation across the complete size spectrum with basepair resolution

Following are the SV tools, which can assist you to achieve your goal.

Sniffles: Structural variation caller using third generation sequencing

Sniffles is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Please note the current version of Sniffles requires sorted output from BWA-MEM (use -M and -x parameter) or NGM-LR with the optional SAM attributes enabled! 

More at https://github.com/fritzsedlazeck/Sniffles

MultiBreak-SV: It identifies structural variants from next-generation paired end data, third-generation long read data, or data from a combination of sequencing platforms.

There are two pieces of software in this release: (1) a pre-processor that takes machineformat (.m5) BLASR files, and (2) MultiBreak-SV. For installation and usage instructions, see doc/MultiBreakSV-Manual.txt.

More at https://github.com/raphael-group/multibreak-sv

Parliament: A Structural Variation Tool. Why ask a single sv-detection approach to find every variant when you can have a parliament of tools deciding?

Publication about the algorithm and “…the first long-read characterization of structural variation in a diploid human personal genome…” (HS1011) - “Assessing structural variation in a personal genome—towards a human reference diploid genome”

More at https://sourceforge.net/projects/parliamentsv/

https://www.dnanexus.com/papers/Parliament_Info_Sheet.pdf

PBHoney: the structural variation discovery tool 

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Read The Paper http://www.biomedcentral.com/1471-2105/15/180/abstract

More at https://sourceforge.net/projects/pb-jelly/

SMRT-SV: Structural variant and indel caller for PacBio reads

Structural variant (SV) and indel caller for PacBio reads based on methods from Chaisson et al. 2014.

SMRT-SV provides an official software package for tools described in Chaisson et al. 2014 and adds several key features including the following.

• Unified variant calling user interface with built-in cluster compute support
• Small indel calling (2-49 bp)
• Improved inversion calling (screenInversions)
• Quality metric for SV calls based on number of local assemblies supporting each call
• Higher sensitivity for SV calls using tiled local assemblies across the entire genome instead of "signature" regions
• Genotyping of SVs with Illumina paired-end reads from WGS samples

More at https://github.com/EichlerLab/pacbio_variant_caller

NAME OF THE POST : Bioinformatician (Part time 3 days in a week) (One Position only)

DURATION : One Year

NAME OF THE PROJECT : Next generation sequencing facility

EDUCATIONAL QUALIFICATIONS : At least a Masters degree in Bioinformatics and Bachelors degree in any stream of life sciences

REQUIREMENTS :

Around 5 years of experience and proven track record in next generation sequence data analysis (supported by publications in peer-reviewed journals), ability to analyze transcriptomics, Chip-seq, and small RNA –seq data.

: Should have the ability to analyze raw primary data generated by Illumina next generation sequencing platforms and create / troubleshoot custom analysis Pipelines.

Should have ability to handle all downstream secondary and tertiary data analysis using commercially available as well as open source softwares (transcriptomics, ChIP-seq, small RNA-seq)

Apart from these, the applicant should have knowledge of the following: Programming: Perl and Python. Operating system:

Linux and Windows. NGS Analysis tools: Maq, BWA, Bowtie, SAM tools, BEDTools, MACS, Galaxy, FastQC, Bismark, MEDIPS, Tophat, Cufflinks, AvadisNGS, CLC Genomics Workbench, Galaxy, BaseSpace, Trinity Statistics: Microsoft Excel and R. Database: MySQL Genome Browser: UCSC, Ensemble, IGV, IGB Motif Analysis Tools: MEME Suite, Transfac and RSAT Functional Annotation Tools: DAVID, GeneCodis, Gene Cards Networking Tools: Cytoscape

EMOLUMENTS : The incumbent will be paid a fee of Rs. 2000/- per sitting/ per day.

SCIENTIST NAME : Dr. Arnab Mukhopadhyay,

Staff Scientific V Next generation sequencing facility

SCIENTIST’S E-MAIL ID : arnab@nii.ac.in

WALK IN INTERVIEW ON : 18th September, 2015

REGISTRATION OF CANDIDATES: 10.30 AM to 11.00 AM

PLEASE NOTE- 1. CANDIDATE MAY FILL UP APPLICATION IN THE PRECRIBED FORMAT ALONG WITH NECESSARY DOCUMENTS FOR VERIFICATION. 2. APPLICATIONS CONTAINING INCOMPLETE INFORMATION SHALL NOT BE ENTERTAINED. 3. DATE OF PASSING THE EXAMINATIONS MUST BE INDICATED CLEARLY. 4. ONLY REGISTERED CANDIDATES WILL BE INTERVIEWED. 5. NO TA/DA WILL BE PAID FOR ATTENDING THE INTERVIEW PRESCRIBED FORM 1. NAME 2. FATHER’S NAME 3. MOTHER’S NAME 4. DATE OF BIRTH 5. SEX (MALE/FEMALE) 6. CATEGORY (SC/ ST/ OBC/ PH) 7. ADDRESS a. (CORRSPONDENCE) b. (PERMANENT) 8. E MAIL, TELEPHONE NO. & MOBILE No (if any) 9. ACADEMIC & PROFESSIONAL QUALIFICATIONS NAME OF EXAMINATION PASSED WITH SUBJECTS YEAR OF PASSING BOARD/ UNIVERSITY PERCENTAGE/ DIVISION REMARKS 10. PAST EXPERIENCE & PRESENT EMPLOYMENT, IF ANY 11. CANDIDATES SHOULD STATE CLEARLY WHETHER THEY HAVE BEEN AWARDED PH.D DEGREE OR THESIS HAS BEEN SUBMITTED. 12. HAVE YOU APPLIED FOR A POSITION EARLIER IN THE INSTITUTE? IF SO:- (1) THE DETAILS OF THE PROJECT AND PROJECT INVESTIGATOR (2) IF CALLED FOR INVERVIEW, RESULTS THEREOF

More at http://www1.nii.res.in/sites/default/files/walkininterview-18sept2015.pdf

Using AlignGraph

AlignGraph --read1 reads_1.fa --read2 reads_2.fa --contig contigs.fa --genome genome.fa --distanceLow distanceLow --distanceHigh distancehigh --extendedContig extendedContigs.fa --remainingContig remainingContigs.fa [--kMer k --insertVariation insertVariation --coverage coverage --part p --fastMap --ratioCheck --iterativeMap --misassemblyRemoval --resume]

Address of the bookmark: https://github.com/baoe/AlignGraph

The tool should be compatible with most UNIX flavors and has been successfully tested on the following operating systems:

• Mac OS X 10.11.1
• Mac OS X 10.10.3
• Ubuntu 14.04 LTS

Address of the bookmark: https://github.com/mculinovic/EAGLER