BOL: Related items

fragScaff: Genome Assembly with Contiguity Preserving Transposition

Jit — Mon, 14 May 2018 04:28:14 -0500

Contiguity preserving transposition and sequencing (CPT-seq) is an entirely in vitro means of generating libraries comprised of 9216 indexed pools, each of which contains thousands of sparsely sequenced long fragments ranging from 5 kilobases to >1 megabase. This software, fragScaff, leverages coincidences between the content of different pools as a source of contiguity information for scaffolding de novo genome assemblies. FragScaff is complementary to Lachesis, providing midrange contiguity to support robust, accurate chromosome-scale de novo genome assemblies without the need for laborious in vivo cloning steps.

Further information about fragScaff, including source code, is available at:https://sourceforge.net/projects/fragscaff/files.

Manuscript describing fragScaff was published as: Adey A, Kitzman JO, Burton JN, Daza R, Kumar A, Christiansen L, Ronaghi M, Amini S, L Gunderson K, Steemers FJ, Shendure J#. In vitro, long-range sequence information for de novo genome assembly via transposase contiguity. Genome Research 2014 Dec;24(12):2041-9. doi: 10.1101/gr.178319.114. PubMed PMID: 25327137.

Address of the bookmark: https://sourceforge.net/projects/fragscaff/files/

COPE: an accurate k-mer-based pair-end reads connection tool to facilitate genome assembly

Jit — Wed, 06 Dec 2017 02:08:14 -0600

An efficient tool called Connecting Overlapped Pair-End (COPE) reads, to connect overlapping pair-end reads using k-mer frequencies. We evaluated our tool on 30× simulated pair-end reads from Arabidopsis thaliana with 1% base error. COPE connected over 99% of reads with 98.8% accuracy, which is, respectively, 10 and 2% higher than the recently published tool FLASH. When COPE is applied to real reads for genome assembly, the resulting contigs are found to have fewer errors and give a 14-fold improvement in the N50 measurement when compared with the contigs produced using unconnected reads.

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope

ALPACA: A hybrid strategy for assembly of genomic DNA shotgun sequencing reads.

Seema Singh — Mon, 30 Apr 2018 04:38:40 -0500

ALPACA requires Celera Assembler 8.3 or later. It is recommended to build Celera Assembler from source. (Why? The pre-built binaries CA_8.3rc1 and CA8.3rc2 will work for any large data set.

Detail paper at https://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-017-3927-8

Address of the bookmark: https://github.com/VicugnaPacos/ALPACA

ChopStitch: exon annotation and splice graph construction using transcriptome assembly and whole genome sequencing data

Rahul Nayak — Tue, 03 Jul 2018 04:14:52 -0500

ChopStitch is a new method for finding putative exons and constructing splice graphs using an assembled transcriptome and whole genome shotgun sequencing (WGSS) data. ChopStitch identifies exon-exon boundaries in de novo assembled RNA-seq data with the help of a Bloom filter that represents the k-mer spectrum of WGSS reads. The algorithm also detects base substitutions in transcript sequences corresponding to sequencing or assembly errors, haplotype variations, or putative RNA editing events. The primary output of our tool is a FASTA file containing putative exons. Further, exon edges are interrogated for alternative exon-exon boundaries to detect transcript isoforms, which are reported as splice graphs in dot output format.

Address of the bookmark: https://github.com/bcgsc/ChopStitch

FinisherSC:a repeat-aware tool for upgrading de novo assembly using long reads

Jit — Mon, 20 Aug 2018 04:08:50 -0500

Here is the command to run the tool:

python finisherSC.py destinedFolder mummerPath

If you are running on server computer and would like to use multiple threads, then the following commands can generate 20 threads to run FinisherSC.

python finisherSC.py -par 20 destinedFolder mummerPath

Sometimes, if the names of raw reads and contigs consists of special characters/formats, FinisherSC/MUMmer may not parse them correctly. In that case, you want to have a quick renaming of the names of contigs/reads in contigs.fasta or raw_reads.fasta using the following command.

    perl -pe 's/>[^\$]*$/">Seg" . ++$n ."\n"/ge' raw_reads.fasta > newRaw_reads.fasta
    cp newRaw_reads.fasta raw_reads.fasta
    perl -pe 's/>[^\$]*$/">Seg" . ++$n ."\n"/ge' contigs.fasta > newContigs.fasta
    cp newContigs.fasta contigs.fasta

Address of the bookmark: https://github.com/kakitone/finishingTool

LR_Gapcloser: a tiling path-based gap closer that uses long reads to complete genome assembly

Rahul Nayak — Thu, 14 May 2020 15:09:52 -0500

LR_Gapcloser is a gap closing tool using long reads from studied species. The long reads could be downloaed from public read archive database (for instance, NCBI SRA database ) or be your own data. Then they are fragmented and aligned to scaffolds using BWA mem algorithm in BWA package. In the package, we provided a compiled bwa, so the user needn't to install bwa. LR_Gapcloser uses the alignments to find the bridging that cross the gap, and then fills the long read original sequence into the genomic gaps.

Address of the bookmark: https://github.com/CAFS-bioinformatics/LR_Gapcloser

Genome assembly tutorial "Genome Assembly for short and long reads"

Jit — Sat, 19 Jan 2019 17:29:53 -0600

In this lab we will perform de novo genome assembly of a bacterial genome. You will be guided through the genome assembly starting with data quality control, through to building contigs and analysis of the results. At the end of the lab you will know:

How to perform basic quality checks on the input data
How to run a short read assembler on Illumina data
How to run a long read assembler on Pacific Biosciences or Oxford Nanopore data
How to improve the accuracy of a long read assembly using short reads
How to assess the quality of an assembly

https://bioinformaticsdotca.github.io/high-throughput_biology_2017

Address of the bookmark: https://bioinformaticsdotca.github.io/high-throughput_biology_2017_module6_lab

Mitochondrial genome assembly tools !

Abhi — Wed, 06 Sep 2023 00:37:18 -0500

Mitochondrial genome assembly tools are specialized software and algorithms designed to accurately reconstruct the mitochondrial genome (mitogenome) from sequencing data, typically obtained through techniques like next-generation sequencing (NGS). The mitochondrial genome is relatively small compared to the nuclear genome, making it an ideal target for assembly. Here are some commonly used mitochondrial genome assembly tools:

MitoFinder: Mitofinder is a pipeline to assemble mitochondrial genomes and annotate mitochondrial genes from trimmed read sequencing data.

MitoHiFi: a python pipeline for mitochondrial genome assembly from PacBio high fidelity reads

MITObim: MITObim is a tool specifically developed for the iterative assembly of mitochondrial genomes. It starts with a reference mitogenome and iteratively refines the assembly using the read data.

MITOS: MITOS is a web-based platform that provides a pipeline for annotating mitochondrial genomes. It integrates multiple software tools for assembly, annotation, and visualization of mitogenomes.

MIRA: MIRA (Mimicking Intelligent Read Assembly) is a versatile genome assembly tool that can be used for mitochondrial genome assembly. It supports various sequencing technologies and allows for reference-based or de novo assembly.

NOVOPlasty: NOVOPlasty is a user-friendly tool designed for de novo assembly of organelle genomes, including mitochondria. It utilizes a seed-and-extend algorithm and is suitable for both short-read and long-read data.

MITOS2: MITOS2 is an updated version of the MITOS pipeline, which automates the annotation of mitochondrial genomes. It provides improved accuracy and additional features for mitochondrial genome analysis.

GetOrganelle: While primarily designed for chloroplast genome assembly, GetOrganelle can also be used for mitochondrial genome assembly. It is particularly useful for dealing with high-throughput sequencing data.

SPAdes: SPAdes (St. Petersburg genome assembler) is a versatile genome assembly tool that can be employed for mitochondrial genome assembly, especially when dealing with complex datasets that may contain nuclear mitochondrial DNA sequences (numts).

IDBA-UD: IDBA-UD (Iterative De Bruijn Graph De Novo Assembler) is another de novo assembly tool that can be used for mitochondrial genome assembly, especially in cases with relatively low coverage.

Velvet: Velvet is a de novo assembly tool that can be applied to mitochondrial genome assembly, especially when working with short-read data.

When selecting a mitochondrial genome assembly tool, it's important to consider the specific characteristics of your sequencing data, such as read length and coverage, as well as the complexity of the mitochondrial genome. Additionally, some tools are better suited for specific organisms or research objectives, so choosing the right tool will depend on your particular project requirements.

Understanding PacBio

Jitendra Narayan — Fri, 24 Feb 2017 10:17:36 -0600

This tutorial includes resources for learning more about PacBio data and bioinformatics analysis, and includes content suitable for both beginners and experts. Below are links to training modules (webinars and PowerPoint presentations) to help you get started with your data processing, as well as information for specialized applications.

Training Resources:

Specialized Applications:

Address of the bookmark: https://github.com/PacificBiosciences/Bioinformatics-Training/wiki

Multi-metagenome assembly

Radha Agarkar — Fri, 03 Mar 2017 10:14:18 -0600

This project contains scripts and tutorials on how to assemble individual microbial genomes from metagenomes, as described in:

Genome sequences of rare, uncultured bacteria obtained by differential coverage binning of multiple metagenomes

Mads Albertsen, Philip Hugenholtz, Adam Skarshewski, Gene W. Tyson, Kåre L. Nielsen and Per .H. Nielsen

Nature Biotechnology 2013, doi: 10.1038/nbt.2579

Address of the bookmark: https://github.com/MadsAlbertsen/multi-metagenome