BOL: Related items

BUSCO: Assessing genome assembly and annotation completeness with Benchmarking Universal Single-Copy Orthologs

Anjana — Tue, 10 May 2016 07:46:24 -0500

High-throughput genomics has revolutionized biological research, however, while the number of sequenced genomes grows by the day, quality assessment of the resulting assembled sequences remains complicated and mostly limited to technical measures like N50.
BUSCO provides measures for quantitative assessment of genome assembly, gene set, and transcriptome completeness based on evolutionarily informed expectations of gene content from near-universal single-copy orthologs selected from OrthoDB.
BUSCO assessments are implemented in open-source software, with comprehensive lineage-specific sets of Benchmarking Universal Single-Copy Orthologs for arthropods, vertebrates, metazoans, fungi, eukaryotes, and bacteria.
These conserved orthologs are ideal candidates for large-scale phylogenomics studies, and the annotated BUSCO gene models built during genome assessments provide a comprehensive gene predictor training set for use as part of genome annotation pipelines.
BUSCO assessments offer intuitive metrics, based on evolutionarily informed expectations of gene content from hundreds of species, to gauge completeness of rapidly accumulating genomic data and satisfy an Iberian's quest for quality - "Busco calidad/qualidade".

Address of the bookmark: http://busco.ezlab.org/

Cutadapt

Bulbul — Wed, 14 Dec 2016 09:59:52 -0600

Cutadapt finds and removes adapter sequences, primers, poly-A tails and other types of unwanted sequence from your high-throughput sequencing reads.

Cutadapt helps with these trimming tasks by finding the adapter or primer sequences in an error-tolerant way. It can also modify and filter reads in various ways. Adapter sequences can contain IUPAC wildcard characters. Also, paired-end reads and even colorspace data is supported. If you want, you can also just demultiplex your input data, without removing adapter sequences at all.

Cutadapt comes with an extensive suite of automated tests and is available under the terms of the MIT license.

If you use cutadapt, please cite DOI:10.14806/ej.17.1.200 .

More at https://github.com/marcelm/cutadapt

Address of the bookmark: http://cutadapt.readthedocs.io/en/stable/guide.html

A Post-assembly genome-improvement toolkit (PAGIT) to obtain annotated genomes from contigs

Abhimanyu Singh — Fri, 12 May 2017 10:50:29 -0500

PAGIT addresses the need for software to generate high quality draft genomes. It is based on a series of programs that we developed:

ABACAS, that is able to contiguate contigs from a de novo assembly against a closely related reference.

IMAGE, an iterative approach for closing gaps in assembled genomes using mate pair information. It is able to close gaps left open by the assembler in a draft genome, even when using the same data sets as used by the original assembler.

iCORN, that enables errors in the consensus sequence to be corrected by iteratively mapping reads to the current assembly. An improved version, especially correction Pacfic Bioscience assemblies (PacBio) can be found here.

RATT, a tool to transfer the annotation from a reference genome, or an earlier assembly, onto the latest assembly.

PAGIT bundles these software and makes them more accessible for users.

Address of the bookmark: http://www.sanger.ac.uk/science/tools/pagit

HINGE: Long-Read Assembly Achieves Optimal Repeat Resolution

Jit — Wed, 07 Feb 2018 09:40:22 -0600

Software accompanying "HINGE: Long-Read Assembly Achieves Optimal Repeat Resolution"

Preprint: http://biorxiv.org/content/early/2016/08/01/062117
Paper: http://genome.cshlp.org/content/27/5/747.full
An ipython notebook to reproduce results in the paper can be found in this repository.

HINGE is an OLC(Overlap-Layout-Consensus) assembler. The idea of the pipeline is shown below.

Address of the bookmark: https://github.com/HingeAssembler/HINGE

SPADes team announce new version SPADes v3.15

BioStar — Fri, 15 Jan 2021 10:24:27 -0600

New SPAdes 3.15.0.0. announced by the SPADes team This release includes such new features as:
- CoronaSPAdes pipeline for the assembly of transcriptomic and metatranscriptomic data of full-length coronaviridae genomes;
- Meta-Viral and RNA-Viral pipelines for metagenomic and metatranscriptomic data defining viral genomes;
-New trusted contiguous use algorithm;
-Switched to the memory allocator mimalloc;
- PlasmidSPAdes and bgcSPAdes are now provided as an input assembly graph;
- Important improvements and corrections to the metaplasmid pipeline;
- Multiple performance improvements in procedures for simplification and repeat resolving.
Please, consider updating.

Check out more at https://cab.spbu.ru/software/spades/

kWIP: The k-mer weighted inner product, a de novo estimator of genetic similarity

Rahul Nayak — Tue, 29 May 2018 08:37:53 -0500

The k-mer Weighted Inner Product.

This software implements a de novo, alignment free measure of sample genetic dissimilarity which operates upon raw sequencing reads. It is able to calculate the genetic dissimilarity between samples without any reference genome, and without assembling one.

De novo estimates of genetic relatedness from next-gen sequencing data https://kwip.readthedocs.org

Address of the bookmark: https://github.com/kdmurray91/kwip

Ribbon: Visualizing complex genome alignments and structural variation:

Jit — Wed, 29 Nov 2017 07:40:22 -0600

Ribbon can be used for long reads, short reads, paired-end reads, and assembly/genome alignments. Instructions for each data format are available by clicking on "instructions" in each tab on the right.

Local installation:

You can install Ribbon locally from Github by following the instructions here: https://github.com/MariaNattestad/Ribbon

Address of the bookmark: http://genomeribbon.com/

Mugsy: multiple whole genome alignment tool

Jit — Fri, 08 Dec 2017 17:41:14 -0600

Mugsy is a multiple whole genome aligner. Mugsy uses Nucmer for pairwise alignment, a custom graph based segmentation procedure for identifying collinear regions, and the segment-based progressive multiple alignment strategy from Seqan::TCoffee. Mugsy accepts draft genomes in the form of multi-FASTA files and does not require a reference genome.

To cite Mugsy, use:

Angiuoli SV and Salzberg SL. Mugsy: Fast multiple alignment of closely related whole genomes.Bioinformatics 2011 27(3):334-4

Address of the bookmark: http://mugsy.sourceforge.net/

G-compass: a comparative genome browser

Jit — Thu, 12 Apr 2018 10:00:27 -0500

G-compass (http://www.h-invitational.jp/g-compass/) is a comparative genome browser. It visualizes evolutionarily conserved genomic regions between human and other 12 vertebrates based on original genome alignments pursuing higher coverage (1,2). Annotations of human genes/transcripts and their ortholog information were derived from H-InvDB and its subdatabase Evola, respectively. G-compass is available for free of charge. [ Sample ]

Address of the bookmark: http://www.h-invitational.jp/g-compass/

Download blasr 1.3 version

Jit — Fri, 15 Jun 2018 03:01:20 -0500

DOWNLOAD LINK: https://github.com/BioInf-Wuerzburg/proovread/raw/master/util/blasr-1.3.1/blasr

I'm running "OPERA-LG_v2.0.5/bin/preprocess_reads.pl" and have the following error:

fail to open file './temporarySam'

[bwa_aln_core] write to the disk... 0.09 sec
[bwa_aln_core] 70778880 sequences have been processed.
[bwa_aln_core] calculate SA coordinate... 161.35 sec
[bwa_aln_core] write to the disk... 0.06 sec
[bwa_aln_core] 70989574 sequences have been processed.
[main] Version: 0.7.15-r1140
[main] CMD: bwa aln -t 30 all_p_ctg.fa -
[main] Real time: 2402.523 sec; CPU: 53429.488 sec
[E::hts_open_format] Failed to open file temporarySam
samtools sort: can't open "temporarySam": No such file or directory
[bwa_aln_core] convert to sequence coordinate... 1.00 sec
[bwa_aln_core] refine gapped alignments... 6.07 sec
[bwa_aln_core] print alignments... PREPROCESS:
Fastq format is recognized
[Thu Jun 14 18:16:47 2018] Building bwa index...
bwa index -p all_p_ctg.fa /home/urbe/Tools/OPERA-LG_v2.0.6/all_p_ctg.fa
[Thu Jun 14 18:18:35 2018] Finding the SA coordinates of the reads using BWA aln...
[Thu Jun 14 18:58:37 2018] Generate alignments of reads using bwa sampe...
bwa samse -n 1 all_p_ctg.fa read.sai - | grep '\(^@\|XT:A:U\)' | /usr/local/bin/samtools view -S -h -b -F 0x4 - | /usr/local/bin/samtools sort -@ 20 -no - temporarySam > FALCON-Unzip-Scaff.bam
Mapping long-reads using blasr...
/home/urbe/Tools/SSpace/SSPACE-LongRead_v1-1/blasr -nproc 40 -m 1 -minMatch 5 -bestn 10 -noSplitSubreads -advanceExactMatches 1 -nCandidates 1 -maxAnchorsPerPosition 1 -sdpTupleSize 7 /media/urbe/MyDDrive/ONTdata/allONT/allONT.fasta /home/urbe/Tools/OPERA-LG_v2.0.6/all_p_ctg.fa | cut -d ' ' -f1-5,7-12 | sed 's/ /\t/g' > FALCON-Unzip-Scaff.map
sh: 1: /home/urbe/Tools/SSpace/SSPACE-LongRead_v1-1/blasr: Permission denied
Sorting mapping results...
sort -k1,1 -k9,9g FALCON-Unzip-Scaff.map > FALCON-Unzip-Scaff.map.sort
Analyzing sorted results...
Extracting linking information...
i3 2000 5000
i2 1000 2000
i4 5000 15000
i0 -200 300
i5 15000 40000
i1 300 1000
Repeat detection...
/home/urbe/Tools/OPERA-LG_v2.0.6/bin//filter_conflicting_edge.pl pairedEdges_i0 contig_length.dat 100 2
Illegal division by zero at /home/urbe/Tools/OPERA-LG_v2.0.6/bin//filter_conflicting_edge.pl line 93.
readline() on closed filehandle FILE at bin/OPERA-long-read.pl line 250.
rm anchor_contig_info.dat contig_length.dat filtered_edges.dat filtered_edges_cov.dat *.sai
rm: cannot remove 'anchor_contig_info.dat': No such file or directory
mv FALCON-Unzip-Scaff.bam FALCON-Unzip-Scaff-with-repeat.bam
/home/urbe/Tools/OPERA-LG_v2.0.6/bin//filter_repeat.pl FALCON-Unzip-Scaff-with-repeat.bam repeat.dat | /usr/local/bin/samtools view - -h -S -b > FALCON-Unzip-Scaff.bam
rm FALCON-Unzip-Scaff-with-repeat.bam
/home/urbe/Tools/OPERA-LG_v2.0.6/bin/OPERA-LG config > log
Analyzing 1 library: FALCON-Unzip-Scaff.bam
min library mean : 0
minimum contig length is 500
Current library: 1 out of 7
Analyzing file: pairedEdges_no_repeat_i0
Analyzing file: pairedEdges_no_repeat_i1
Analyzing file: pairedEdges_no_repeat_i2
Analyzing file: pairedEdges_no_repeat_i3
Analyzing file: pairedEdges_no_repeat_i4
Analyzing file: pairedEdges_no_repeat_i5
ln -s results/scaffoldSeq.fasta scaffoldSeq.fasta

To resolve this, try downloading blasr version 1.3 above and re-run :)