BOL: Related items

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

BioJoker — Tue, 02 Apr 2019 21:54:55 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye

Short-read assembly using Spades !

Abhimanyu Singh — Mon, 31 Jan 2022 07:18:16 -0600

If we only had Illumina reads, we could also assemble these using the tool Spades.

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

illumina_R1.fastq.gz: the Illumina forward reads
illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

-1 is input file of forward reads
-2 is input file of reverse reads
--careful minimizes mismatches and short indels
--cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
-o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

Oxford Nanopore Sequencing, Hybrid Error Correction, and de novo Assembly of a Eukaryotic Genome

Jit — Wed, 29 Nov 2017 05:08:53 -0600

Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available that we used for sequencing the S. cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr (https://github.com/jgurtowski/nanocorr) specifically for Oxford Nanopore reads, as existing packages were incapable of assembling the long read lengths (5-50kbp) at such high error rate (between ~5 and 40% error). With this new method we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: the contig N50 length is more than ten-times greater than an Illumina-only assembly (678kb versus 59.9kbp), and has greater than 99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

Address of the bookmark: http://schatzlab.cshl.edu/data/nanocorr/

Protocol for De novo Genome Assembly using Illumina Reads

BioStar — Sat, 16 Jan 2021 21:42:11 -0600

In this protocol, we address and describe the de novo assembly method for small to medium-sized genomes.

What is de novo genome assembly?
The method of taking a large number of short DNA sequences and placing them back together to create a reflection of the original chromosomes from which the DNA originated relates to genome assembly. No previous knowledge of the source DNA sequence length, structure or composition is inferred by De novo genome assemblies. The DNA of the target organism is split up into millions of tiny parts and read on a sequencing computer in a genome sequencing experiment. Depending on the sequencing system used, these "reads" range from 20 to 1000 nucleotide base pairs (bp) in length. Usually, length reads of 36 - 150 bp are produced for Illumina style short read sequencing. These reads can be either “single ended” as described above or “paired end.”

Why genome assembly?
In basic research into why and how they live, as well as in applied topics, identifying the DNA sequence of an organism is useful. Awareness of a DNA sequence may be useful in virtually any biological research because of the relevance of DNA to living things. For example, it may be used in medicine to classify, diagnose and eventually improve genetic disorder therapies. Similarly, pathogens study can lead to treatments for infectious diseases.

Raw NGS data
Reads can be saved as a Fasta file as text or in a FastQ file with their attributes. FastQ is the most common read file format since this is what the Illumina sequencing pipeline creates. This will henceforth be the subject of our conversation.

In a nutshell the protocol:
Get the sequence file(s) read from the sequencing machine (s).
Look at the readings - have an idea of what you have and what the standard is like.
If required, raw data cleanup/quality trimming.
Choose an adequate parameter set for assembly.
Assemble the data into scaffolds/contigs.
Examine the assembly performance and determine the efficiency of the assembly.

Read Quality Control:
Check the qualiy with fastQC.
Script
https://bioinformaticsonline.com/snippets/view/42540/install-fastqc-using-conda

Quality trimming/cleanup of read files.
This function trims adapters, barcodes and other contaminants from the reads.
Script
https://bioinformaticsonline.com/snippets/view/42542/trimmomatic-command

Genome Assembly:
The object of this portion of the protocol is to explain the method of assembling the reads trimmed by quality into draft contigs.

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o result_of_spades_assembly_all_illumina

A significant range of short-read assemblers are available. Everyone with strengths and disadvantages of their own.
Some of the assemblers available include:
Velvet
SOAP-denovo
MIRA
ALLPATHS

Next step is to assess the suitability and what to do with a draft package of contiguous details for the remainder of the study now. Few stuff you can note about the contigs you just created: They're the draft Contigs. Any mis-assemblies can occur.

Mis-assembly checking and assembly metric tools:
QUAST - Quality assessment tool for genome assembly http://bioinf.spbau.ru/quast
Mauve assembly metrics - http://code.google.com/p/ngopt/wiki/How_To_Score_Genome_Assemblies_with_Mauve
InGAP-SV - https://sites.google.com/site/nextgengenomics/ingap and http://ingap.sourceforge.net/
inGAP is also useful for finding structural variants between genomes from read mappings.

Genome finishing tools:
Semi-automated gap fillers:
Gap filler - http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/gapfiller/

IMAGE (V2) - http://sourceforge.net/apps/mediawiki/image2/index.php?title=Main_Page

Genome visualisers and editors:
Artemis - http://www.sanger.ac.uk/resources/software/artemis/
IGV - http://www.broadinstitute.org/igv/

Automated and semi automated annotation tools:
Prokka - https://github.com/tseemann/prokka
RAST - http://www.nmpdr.org/FIG/wiki/view.cgi/FIG/RapidAnnotationServer
JCVI Annotation Service - http://www.jcvi.org/cms/research/projects/annotation-service/

Frequent command use for the analysis are at:

https://bioinformaticsonline.com/blog/view/38765/list-of-tools-frequently-used-while-genome-assembly
https://bioinformaticsonline.com/pages/view/42275/frequent-parameters-for-bioinformatics-tools

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

Jit — Fri, 04 May 2018 19:16:22 -0500

Flye is a de novo assembler for long and noisy reads, such as those produced by PacBio and Oxford Nanopore Technologies. The algorithm uses an A-Bruijn graph to find the overlaps between reads and does not require them to be error-corrected. After the initial assembly, Flye performs an extra repeat classification and analysis step to improve the structural accuracy of the resulting sequence. The package also includes a polisher module, which produces the final assembly of high nucleotide-level quality.

Address of the bookmark: https://github.com/fenderglass/Flye

LACHESIS: Genome Assembly with Hi-C-based Contact Probability Maps (LACHESIS)

Jit — Mon, 14 May 2018 04:26:30 -0500

LACHESIS is method that exploits contact probability map data (e.g. from Hi-C) for chromosome-scale de novo genome assembly.

Further information about LACHESIS, including source code, documentation and a user's guide are available at: http://shendurelab.github.io/LACHESIS.

Manuscript describing LACHESIS was published as: Burton JN#, Adey A, Patwardhan RP, Qiu R, Kitzman JO, Shendure J#. Chromosome-scale scaffolding of de novo genome assemblies based on chromatin interactions. Nature Biotechnology 2013 Dec;31(12):1119-25. doi: 10.1038/nbt.272. PubMed PMID: 24185095.

http://shendurelab.github.io/LACHESIS/

Address of the bookmark: http://shendurelab.github.io/LACHESIS/

HASLR: a hybrid assembler which uses both second and third generation sequencing reads

BioStar — Mon, 04 May 2020 02:04:03 -0500

HASLR, a hybrid assembler which uses both second and third generation sequencing reads to efficiently generate accurate genome assemblies. Our experiments show that HASLR is not only the fastest assembler but also the one with the lowest number of misassemblies on all the samples compared to other tested assemblers. Furthermore, the generated assemblies in terms of contiguity and accuracy are on par with the other tools on most of the samples. Availability. HASLR is an open source tool available at https://github.com/vpc-ccg/haslr.

Address of the bookmark: https://github.com/vpc-ccg/haslr

fragScaff: Genome Assembly with Contiguity Preserving Transposition

Jit — Mon, 14 May 2018 04:28:14 -0500

Contiguity preserving transposition and sequencing (CPT-seq) is an entirely in vitro means of generating libraries comprised of 9216 indexed pools, each of which contains thousands of sparsely sequenced long fragments ranging from 5 kilobases to >1 megabase. This software, fragScaff, leverages coincidences between the content of different pools as a source of contiguity information for scaffolding de novo genome assemblies. FragScaff is complementary to Lachesis, providing midrange contiguity to support robust, accurate chromosome-scale de novo genome assemblies without the need for laborious in vivo cloning steps.

Further information about fragScaff, including source code, is available at:https://sourceforge.net/projects/fragscaff/files.

Manuscript describing fragScaff was published as: Adey A, Kitzman JO, Burton JN, Daza R, Kumar A, Christiansen L, Ronaghi M, Amini S, L Gunderson K, Steemers FJ, Shendure J#. In vitro, long-range sequence information for de novo genome assembly via transposase contiguity. Genome Research 2014 Dec;24(12):2041-9. doi: 10.1101/gr.178319.114. PubMed PMID: 25327137.

Address of the bookmark: https://sourceforge.net/projects/fragscaff/files/

HASLR: a tool for rapid genome assembly of long sequencing reads

LEGE — Fri, 31 Jan 2020 05:50:15 -0600

HASLR is a tool for rapid genome assembly of long sequencing reads. HASLR is a hybrid tool which means it requires long reads generated by Third Generation Sequencing technologies (such as PacBio or Oxford Nanopore) together with Next Generation Sequencing reads (such as Illumina) from the same sample.

Address of the bookmark: https://github.com/vpc-ccg/haslr

Biological databases !

BioStar — Wed, 12 Feb 2020 01:16:29 -0600

Now a days there are a lots of genomics databases available around the world. This bookmark is created to provide all links in one place ...

ftp://ftp.ncbi.nih.gov/genomes/

https://hgdownload.soe.ucsc.edu/downloads.html

Address of the bookmark: ftp://ftp.ncbi.nih.gov/genomes/