BOL: Related items

Chromonomer: a tool set for repairing and enhancing assembled genomes through integration of genetic maps and conserved synteny

Jit — Mon, 17 Feb 2020 05:38:46 -0600

Chromonomer is a program designed to integrate a genome assembly with a genetic map. Chromonomer tries very hard to identify and remove markers that are out of order in the genetic map, when considered against their local assembly order; and to identify scaffolds that have been incorrectly assembled according to the genetic map, and split those scaffolds.

Address of the bookmark: http://catchenlab.life.illinois.edu/chromonomer/

Published a dataset of 363 genomes from approximately 92 percent of bird families

Jit — Thu, 19 Nov 2020 07:04:41 -0600

A research team published a dataset of 363 genomes from approximately 92 percent of bird families and showed the significance of sampling dense organisms for biodiversity research. The study was jointly conducted by Chinese and international institutions and museums and was led by researchers from the Kunming Institute of Zoology (KIZ) of the Chinese Academy of Sciences (CAS). Total of 267 were newly published among the 363 sequenced genomes. They were mainly taken from samples of avian tissue kept in museums around the world, enabling researchers to sequence rare and endangered birds' genomes.

Its descendants have adapted to a wide variety of ecological niches since the first bird formed more than 150 million years ago, giving rise to small, hovering hummingbirds, plunge-diving pelicans and showy paradise birds. More than 10,000 bird species live on the planet today - and now scientists are well on their way to capturing a full genetic image of that diversity.

B10K is expanding its efforts to encompass the next stage of avian classification with 363 genomes complete. The team will sequence thousands of extra genomes in this process, attempting to represent each of the approximately 2,300 bird genera.

The genomic resource is expected to provide new insights on evolutionary processes in cross-species comparative studies and assist in efforts to protect species, according to the research findings reported as a cover story in the journal Nature.

Ref at Dense sampling of bird diversity increases power of comparative genomics https://www.nature.com/articles/s41586-020-2873-9

Synorth: exploring the evolution of synteny and long-range regulatory interactions in vertebrate genomes

LEGE — Mon, 06 May 2024 06:21:10 -0500

Genomic regulatory blocks are chromosomal regions spanned by long clusters of highly conserved noncoding elements devoted to long-range regulation of developmental genes, often immobilizing other, unrelated genes into long-lasting syntenic arrangements. Synorth http://synorth.genereg.net/ is a web resource for exploring and categorizing the syntenic relationships in genomic regulatory blocks across multiple genomes, tracing their evolutionary fate after teleost whole genome duplication at the level of genomic regulatory block loci, individual genes, and their phylogenetic context.

More at https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2745767/

Address of the bookmark: http://synorth.genereg.net/

INC-Seq: accurate single molecule reads using nanopore sequencing

Jit — Mon, 27 Nov 2017 10:38:56 -0600

INC-Seq reads enabled accurate species-level classification, identification of species at 0.1 % abundance and robust quantification of relative abundances, providing a cheap and effective approach for pathogen detection and microbiome profiling on the MinION system.

Address of the bookmark: https://github.com/CSB5/INC-Seq

pbalign: maps PacBio reads to reference sequences and saves alignments to a BAM file

Jit — Thu, 24 May 2018 10:06:52 -0500

pbalign aligns PacBio reads to reference sequences, filters aligned reads according to user-specific filtering criteria, and converts the output to either the SAM format or PacBio Compare HDF5 (e.g., .cmp.h5) format. The output Compare HDF5 file will be compatible with Quiver if --forQuiver option is specified.

Address of the bookmark: https://github.com/PacificBiosciences/pbalign

SimLoRD: A read simulator for third generation sequencing reads

Aaryan Lokwani — Wed, 22 Aug 2018 10:40:27 -0500

SimLoRD is a read simulator for third generation sequencing reads and is currently focused on the Pacific Biosciences SMRT error model.

Reads are simulated from both strands of a provided or randomly generated reference sequence.

The reference can be read from a FASTA file or randomly generated with a given GC content. It can consist of several chromosomes, whose structure is respected when drawing reads. (Simulation of genome rearrangements may be incorporated at a later stage.)
The read lengths can be determined in four ways: drawing from a log-normal distribution (typical for genomic DNA), sampling from an existing FASTQ file (typical for RNA), sampling from a a text file with integers (RNA), or using a fixed length
Quality values and number of passes depend on fragment length.
Provided subread error probabilities are modified according to number of passes
Outputs reads in FASTQ format and alignments in SAM format

Address of the bookmark: https://bitbucket.org/genomeinformatics/simlord/

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Neel — Tue, 27 Nov 2018 03:38:49 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Reasons to use Deepbinner:
- To minimise the number of unclassified reads (use Deepbinner by itself).
- To minimise the number of misclassified reads (use Deepbinner in conjunction with Albacore demultiplexing).
- You plan on running signal-level downstream analyses, like Nanopolish. Deepbinner can demultiplex the fast5 fileswhich makes this easier.
Reasons to not use Deepbinner:
- You only have basecalled reads not the raw fast5 files (which Deepbinner requires).
- You have a small/slow computer. Deepbinner is more computationally intensive than Porechop.
- You used a sequencing/barcoding kit other than the ones Deepbinner was trained on.

Address of the bookmark: https://github.com/rrwick/Deepbinner

Rcorrector: efficient and accurate error correction for Illumina RNA-seq reads

BioStar — Tue, 04 Feb 2020 23:23:16 -0600

Rcorrector has an accuracy higher than or comparable to existing methods, including the only other method (SEECER) designed for RNA-seq reads, and is more time and memory efficient. With a 5 GB memory footprint for 100 million reads, it can be run on virtually any desktop or server. The software is available free of charge under the GNU General Public License from https://github.com/mourisl/Rcorrector/.

Usage: perl run_rcorrector.pl [OPTIONS]
OPTIONS:
	Required
	-s seq_files: comma separated files for single-end data sets
	-1 seq_files_left: comma separated files for the first mate in the paried-end data sets
	-2 seq_files_right: comma separated files for the second mate in the paired-end data sets
	-i seq_files_interleaved: comma sperated files for interleaved paired-end data sets
	Optional
	-k INT: kmer_length (<=32, default: 23)
	-od STRING: output_file_directory (default: ./)
	-t INT: number of threads to use (default: 1)
	-trim : allow trimming (default: false)
	-maxcorK INT: the maximum number of correction within k-bp window (default: 4)
	-wk FLOAT: the proportion of kmers that are used to estimate weak kmer count threshold, lower for more divergent genome (default: 0.95)
	-ek INT: expected number of kmers; does not affect the correctness of program but affects the memory usage (default: 100000000)
	-stdout: output the corrected reads to stdout (default: not used)
	-verbose: output some correction information to stdout (default: not used)
	-stage INT: start from which stage (default: 0)
		0-start from begining(storing kmers in bloom filter) ;
		1-start from count kmers showed up in bloom filter;
		2-start from dumping kmer counts into a jf_dump file;
		3-start from error correction.

Address of the bookmark: https://github.com/mourisl/Rcorrector/

SHAMAN: a user-friendly website for metataxonomic analysis from raw reads to statistical analysis

BioStar — Mon, 17 Aug 2020 05:21:09 -0500

SHAMAN is a shiny application for differential analysis of metagenomic data (16S, 18S, 23S, 28S, ITS and WGS) including bioinformatics treatment of raw reads for targeted metagenomics, statistical analysis and results visualization with a large variety of plots (barplot, boxplot, heatmap, …).
The bioinformatics treatment is based on Vsearch [Rognes 2016] which showed to be both accurate and fast [Wescott 2015].The statistical analysis is based on DESeq2 R package [Anders and Huber 2010] which robustly identifies the differential abundant features as suggested in [McMurdie and Holmes 2014] and [Jonsson2016]. SHAMAN robustly identifies the differential abundant genera with the Generalized Linear Model implemented in DESeq2 [Love 2014].
SHAMAN is compatible with standard formats for metagenomic analysis (.csv, .tsv, .biom) and figures can be downloaded in several formats. A presentation about SHAMAN is available here and a poster here.

More at https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-020-03666-4

Address of the bookmark: https://github.com/aghozlane/shaman

FastProNGS: fast preprocessing of next-generation sequencing reads

Rahul Nayak — Sat, 26 Dec 2020 08:35:21 -0600

FastProNGS to integrate the quality control process with automatic adapter removal. Parallel processing was implemented to speed up the process by allocating multiple threads. Compared with similar up-to-date preprocessing tools, FastProNGS is by far the fastest.

Address of the bookmark: https://github.com/Megagenomics/FastProNGS