BOL: Related items

Filtlong: quality filtering tool for long reads

Radha Agarkar — Wed, 13 May 2020 10:23:55 -0500

Filtlong is a tool for filtering long reads by quality. It can take a set of long reads and produce a smaller, better subset. It uses both read length (longer is better) and read identity (higher is better) when choosing which reads pass the filter.

Filtlong builds into a stand-alone executable:

git clone https://github.com/rrwick/Filtlong.git
cd Filtlong
make -j
bin/filtlong -h

Address of the bookmark: https://github.com/rrwick/Filtlong

Short-read assembly using Spades !

Abhimanyu Singh — Mon, 31 Jan 2022 07:18:16 -0600

If we only had Illumina reads, we could also assemble these using the tool Spades.

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

illumina_R1.fastq.gz: the Illumina forward reads
illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

-1 is input file of forward reads
-2 is input file of reverse reads
--careful minimizes mismatches and short indels
--cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
-o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

ACANA: An accurate and consistent alignment tool for DNA sequences

Jit — Wed, 06 Dec 2017 09:45:29 -0600

ACANA is an accurate and consistent alignment tool for DNA sequences. ACANA is specifically designed for aligning sequences that share only some moderately conserved regions and/or have a high frequency of long insertions or deletions. It attempts to combine the best of local and global alignments algorithms in searching for evolutionarily related regions of sequences in order to achieve the best alignment. ACANA is also robust to the small changes of alignment parameters, particularly the gap extension score. As an accurate alignment tool, ACANA is particularly useful in comparative sequence analysis for identifying conserved functional regulatory elements.

Address of the bookmark: https://www.niehs.nih.gov/research/resources/software/biostatistics/acana/index.cfm

D-GENIES: A tool for Dotplot large Genomes in an Interactive, Efficient and Simple way

Jit — Mon, 11 Jun 2018 09:41:22 -0500

D-GENIES – for Dotplot large Genomes in an Interactive, Efficient and Simple way – is an online tool designed to compare two genomes. It supports large genome and you can interact with the dot plot to improve the visualisation. We use minimap version 2 to align the two genomes. Then, the PAF file is parsed and plotted into an interactive plot written with d3.js library. D-Genies also allows to display dot plots from other aligners by uploading their PAF or MAF alignment file. http://dgenies.toulouse.inra.fr/

Address of the bookmark: http://dgenies.toulouse.inra.fr/

DMINDA2: an integrated web server for DNA motif identification and analyses

BioStar — Sun, 02 Feb 2020 14:26:01 -0600

DMINDA (DNA motif identification and analyses) is an integrated web server for DNA motif identification and analyses

More at http://bmbl.sdstate.edu/DMINDA2/

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4086085/

Address of the bookmark: http://bmbl.sdstate.edu/DMINDA2/

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop

Rainbow: an integrated tool for efficient clustering and assembling RAD-seq reads

Rahul Nayak — Fri, 19 Oct 2018 08:23:42 -0500

Rainbow is developed to provide an ultra-fast and memory-efficient solution to clustering and assembling short reads produced by RAD-seq. First, Rainbow clusters reads using a spaced seed method. Then, Rainbow implements a heterozygote calling like strategy to divide potential groups into haplotypes in a top–down manner. And along a guided tree, it iteratively merges sibling leaves in a bottom–up manner if they are similar enough. Here, the similarity is defined by comparing the 2nd reads of a RAD segment. This approach tries to collapse heterozygote while discriminate repetitive sequences. At last, Rainbow uses a greedy algorithm to locally assemble merged reads into contigs. Rainbow not only outputs the optimal but also suboptimal assembly results. Based on simulation and a real guppy RAD-seq data, we show that Rainbow is more competent than the other tools in dealing with RAD-seq data

Address of the bookmark: https://sourceforge.net/projects/bio-rainbow/files/

mixtureS: a novel tool for bacterial strain reconstruction from reads

BioStar — Fri, 21 Aug 2020 08:23:19 -0500

mixtureS that can de novo identify bacterial strains from shotgun reads of a clonal or metagenomic sample, without prior knowledge about the strains and their variations. Tested on 243 simulated datasets and 195 experimental datasets, mixtureS reliably identified the strains, their numbers and their abundance. Compared with three tools, mixtureS showed better performance in almost all simulated datasets and the vast majority of experimental datasets.

Availability

The source code and tool mixtureS is available at http://www.cs.ucf.edu/˜xiaoman/mixtureS/.

Address of the bookmark: http://www.cs.ucf.edu/~xiaoman/mixtureS/

iRNAD: a computational tool for identifying D modification sites in RNA sequence

Abhimanyu Singh — Thu, 16 May 2019 00:20:07 -0500

iRNAD, for identifying D modification sites in RNA sequence. In this predictor, the RNA samples derived from five species were encoded by nucleotide chemical property and nucleotide density. Support vector machine was utilized to perform the classification.

http://lin-group.cn/server/iRNAD/

Address of the bookmark: http://lin-group.cn/server/iRNAD/

Software and Tools to detect structure variation with long reads !!

Archana Malhotra — Wed, 15 Mar 2017 14:31:09 -0500

Uncovering the connection between genetics and heritable diseases requires an approach that looks at all the variant bases and types in a genome. While a PacBio de novo assembly resolves the most novel SV variants. 8-10X PacBio coverage of single genomes or trios reveals triple the SVs detectable by short-read data.

With Single Molecule, Real-Time (SMRT) Sequencing, you can access structural variations having a broad range of sizes, types, and GC content with the ability to:

Uncover missing heritability linked to structural variation
Unambiguously identify genomic context and variant breakpoints at the sequence level to unravel the genetic etiology of disease
Resolve structural variation across the complete size spectrum with basepair resolution

Following are the SV tools, which can assist you to achieve your goal.

Sniffles: Structural variation caller using third generation sequencing

Sniffles is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Please note the current version of Sniffles requires sorted output from BWA-MEM (use -M and -x parameter) or NGM-LR with the optional SAM attributes enabled!

More at https://github.com/fritzsedlazeck/Sniffles

MultiBreak-SV: It identifies structural variants from next-generation paired end data, third-generation long read data, or data from a combination of sequencing platforms.

There are two pieces of software in this release: (1) a pre-processor that takes machineformat (.m5) BLASR files, and (2) MultiBreak-SV. For installation and usage instructions, see doc/MultiBreakSV-Manual.txt.

More at https://github.com/raphael-group/multibreak-sv

Parliament: A Structural Variation Tool. Why ask a single sv-detection approach to find every variant when you can have a parliament of tools deciding?

Publication about the algorithm and “…the first long-read characterization of structural variation in a diploid human personal genome…” (HS1011) - “Assessing structural variation in a personal genome—towards a human reference diploid genome”

More at https://sourceforge.net/projects/parliamentsv/

https://www.dnanexus.com/papers/Parliament_Info_Sheet.pdf

PBHoney: the structural variation discovery tool

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Read The Paper http://www.biomedcentral.com/1471-2105/15/180/abstract

More at https://sourceforge.net/projects/pb-jelly/

SMRT-SV: Structural variant and indel caller for PacBio reads

Structural variant (SV) and indel caller for PacBio reads based on methods from Chaisson et al. 2014.

SMRT-SV provides an official software package for tools described in Chaisson et al. 2014 and adds several key features including the following.

Unified variant calling user interface with built-in cluster compute support
Small indel calling (2-49 bp)
Improved inversion calling (screenInversions)
Quality metric for SV calls based on number of local assemblies supporting each call
Higher sensitivity for SV calls using tiled local assemblies across the entire genome instead of "signature" regions
Genotyping of SVs with Illumina paired-end reads from WGS samples

More at https://github.com/EichlerLab/pacbio_variant_caller