BOL: Related items

FastProNGS: fast preprocessing of next-generation sequencing reads

Rahul Nayak — Sat, 26 Dec 2020 08:35:21 -0600

FastProNGS to integrate the quality control process with automatic adapter removal. Parallel processing was implemented to speed up the process by allocating multiple threads. Compared with similar up-to-date preprocessing tools, FastProNGS is by far the fastest.

Address of the bookmark: https://github.com/Megagenomics/FastProNGS

LR_Gapcloser: a tiling path-based gap closer that uses long reads to complete genome assembly

Rahul Nayak — Thu, 14 May 2020 15:09:52 -0500

LR_Gapcloser is a gap closing tool using long reads from studied species. The long reads could be downloaed from public read archive database (for instance, NCBI SRA database ) or be your own data. Then they are fragmented and aligned to scaffolds using BWA mem algorithm in BWA package. In the package, we provided a compiled bwa, so the user needn't to install bwa. LR_Gapcloser uses the alignments to find the bridging that cross the gap, and then fills the long read original sequence into the genomic gaps.

Address of the bookmark: https://github.com/CAFS-bioinformatics/LR_Gapcloser

wtdbg2: A fuzzy Bruijn graph approach to long noisy reads assembly

BioStar — Mon, 04 Feb 2019 04:53:47 -0600

Wtdbg2 is a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore Technologies (ONT). It assembles raw reads without error correction and then builds the consensus from intermediate assembly output.

./wtdbg2 -x rs -g 4.6m -t 16 -i reads.fa.gz -fo prefix
./wtpoa-cns -t 16 -i prefix.ctg.lay.gz -fo prefix.ctg.fa

Address of the bookmark: https://github.com/ruanjue/wtdbg2

FinisherSC: a repeat-aware and scalable tool for upgrading de novo assembly using long reads

Jit — Mon, 27 Feb 2017 09:49:45 -0600

FinisherSC, a repeat-aware and scalable tool for upgrading de novo assembly using long reads. Experiments with real data suggest that FinisherSC can provide longer and higher quality contigs than existing tools while maintaining high concordance.

Address of the bookmark: http://kakitone.github.io/finishingTool/

DBG2OLC:Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies

Jit — Wed, 19 Apr 2017 10:09:51 -0500

DBG2OLC:Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies

Our work is published in Scientific Reports:

Ye, C. et al. DBG2OLC: Efficient Assembly of Large Genomes Using Long Erroneous Reads of the Third Generation Sequencing Technologies. Sci. Rep. 6, 31900; doi: 10.1038/srep31900 (2016).

http://www.nature.com/articles/srep31900

The manual can be downloaded from:

https://github.com/yechengxi/DBG2OLC/raw/master/Manual.docx

To use precompiled versions,please go to:

https://github.com/yechengxi/DBG2OLC/tree/master/compiled

Address of the bookmark: https://github.com/yechengxi/DBG2OLC

npScarf: real-time scaffolder using SPAdes contigs and Nanopore sequencing reads

Shruti Paniwala — Mon, 11 Jun 2018 05:14:57 -0500

npScarf (jsa.np.npscarf) is a program that connect contigs from a draft genomes to generate sequences that are closer to finish. These pipelines can run on a single laptop for microbial datasets. In real-time mode, it can be integrated with simple structural analyses such as gene ordering, plasmid forming.

Address of the bookmark: http://japsa.readthedocs.io/en/latest/tools/jsa.np.npscarf.html

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Jit — Mon, 10 Feb 2020 02:45:53 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Address of the bookmark: https://github.com/rrwick/Deepbinner

TAREAN: A computational tool for identification and characterization of satellite DNA from unassembled short reads

Surabhi Chaudhary — Tue, 15 May 2018 02:53:11 -0500

TAndem REpeat ANalyzer -TAREAN – is a computational pipeline for unsupervised identification of satellite repeats from unassembled sequence reads. The pipeline uses low-pass whole genome sequence reads and performs their graph-based clustering. Resulting clusters, representing all types of repeats, are then examined for the presence of circular structures and putative satellite repeats are reported.

How to use TAREAN:

Install a local instance of the pipeline using its source code available from bitbucket repository.
Use public Galaxy-based server at https://repeatexplorer-elixir.cerit-sc.cz/. The server is provided in frame of the Elixir CZ project and is maintained by CESNET and CERIT-SC. Simple registration is required to use this service.

Development of TAREAN was supported by ELIXIR CZ research infrastructure project (MEYS Grant No: LM2015047).

References

Novak, P., Avila Robledillo, L., Koblizkova, A., Vrbova, I., Neumann, P., Macas, J. (2017) – TAREAN: a computational tool for identification and characterization of satellite DNA from unassembled short reads. Nucleic Acids Res., doi:10.1093/nar/gkx257

Address of the bookmark: https://bitbucket.org/petrnovak/repex_tarean

WhatsHap: fast and accurate read-based phasing

Jit — Mon, 28 May 2018 09:52:16 -0500

WhatsHap is a software for phasing genomic variants using DNA sequencing reads, also called read-based phasing or haplotype assembly. It is especially suitable for long reads, but works also well with short reads.

Features

Very accurate results (Martin et al., WhatsHap: fast and accurate read-based phasing)

Works well with Illumina, PacBio, Oxford Nanopore and other types of reads

It phases SNVs, indels and even “complex” variants (such as TCG → AGAA)

Pedigree phasing mode uses reads from related individuals (such as trios) to improve results and to reduce coverage requirements (Garg et al., Read-Based Phasing of Related Individuals).

WhatsHap is easy to install

It is easy to use: Pass in a VCF and one or more BAM files, get out a phased VCF. Supports multi-sample VCFs.

It produces standard-compliant VCF output by default

If desired, get output that is compatible with ReadBackedPhasing

Open Source (MIT license)

Address of the bookmark: https://whatshap.readthedocs.io/en/latest/

Rcorrector: efficient and accurate error correction for Illumina RNA-seq reads

BioStar — Tue, 04 Feb 2020 23:23:16 -0600

Rcorrector has an accuracy higher than or comparable to existing methods, including the only other method (SEECER) designed for RNA-seq reads, and is more time and memory efficient. With a 5 GB memory footprint for 100 million reads, it can be run on virtually any desktop or server. The software is available free of charge under the GNU General Public License from https://github.com/mourisl/Rcorrector/.

Usage: perl run_rcorrector.pl [OPTIONS]
OPTIONS:
	Required
	-s seq_files: comma separated files for single-end data sets
	-1 seq_files_left: comma separated files for the first mate in the paried-end data sets
	-2 seq_files_right: comma separated files for the second mate in the paired-end data sets
	-i seq_files_interleaved: comma sperated files for interleaved paired-end data sets
	Optional
	-k INT: kmer_length (<=32, default: 23)
	-od STRING: output_file_directory (default: ./)
	-t INT: number of threads to use (default: 1)
	-trim : allow trimming (default: false)
	-maxcorK INT: the maximum number of correction within k-bp window (default: 4)
	-wk FLOAT: the proportion of kmers that are used to estimate weak kmer count threshold, lower for more divergent genome (default: 0.95)
	-ek INT: expected number of kmers; does not affect the correctness of program but affects the memory usage (default: 100000000)
	-stdout: output the corrected reads to stdout (default: not used)
	-verbose: output some correction information to stdout (default: not used)
	-stage INT: start from which stage (default: 0)
		0-start from begining(storing kmers in bloom filter) ;
		1-start from count kmers showed up in bloom filter;
		2-start from dumping kmer counts into a jf_dump file;
		3-start from error correction.

Address of the bookmark: https://github.com/mourisl/Rcorrector/