BOL: Related items

Alignment-free sequence comparison tools available for next-generation sequencing data analysis

Abhimanyu Singh — Tue, 07 Nov 2017 05:33:33 -0600

kallisto

Transcript abundance quantification from RNA-seq data (uses pseudoalignment for rapid determination of read compatibility with targets)

Software (C++)

https://pachterlab.github.io/kallisto/

Sailfish

Estimation of isoform abundances from reference sequences and RNA-seq data (k-mer based)

Software (C++)

http://www.cs.cmu.edu/~ckingsf/software/sailfish/

Salmon

Quantification of the expression of transcripts using RNA-seq data (uses k-mers)

https://combine-lab.github.io/salmon/

RNA-Skim

RNA-seq quantification at transcript-level (partitions the transcriptome into disjoint transcript clusters; uses sig-mers, a special type of k-mers)

Software (C++)

http://www.csbio.unc.edu/rs/

Variant calling

ChimeRScope

Fusion transcript prediction using gene k-mers profiles of the RNA-seq paired-end reads

Software (Java)

https://github.com/ChimeRScope/ChimeRScope/wiki

FastGT

Genotyping of known SNV/SNP variants directly from raw NGS sequence reads by counting unique k-mers

Software (C)

https://github.com/bioinfo-ut/GenomeTester4/

Phy-Mer

Reference-independent mitochondrial haplogroup classifier from NGS data (k-mer based)

Software (Python)

https://github.com/danielnavarrogomez/phy-mer

LAVA

Genotyping of known SNPs (dbSNP and Affymetrix's Genome-Wide Human SNP Array) from raw NGS reads (k-mer based)

Software (C)

http://lava.csail.mit.edu/

MICADo

Detection of mutations in targeted third-generation NGS data (can distinguish patients’ specific mutations; algorithm uses k-mers and is based on colored de Bruijn graphs)

Software (Python)

http://github.com/cbib/MICADo

General mapper

Minimap

Lightweight and fast read mapper and read overlap detector (uses the concept of “minimazers”, a special type of k-mers)

Software (C)

https://github.com/lh3/minimap

Assembly

De novo genome assembly

MHAP

Produces highly continuous assembly (fully resolved chromosome arms) from third-generation long and noisy reads (10 kbp) using a dimensionality reduction technique MinHash

Software (Java)

https://github.com/marbl/MHAP

Miniasm

Assembler of long noisy reads (SMRT, ONT) using the Overlap-Layout Consensus (OLC) approach without the necessity of an error correction stage (uses minimap)

Software (C)

https://github.com/lh3/miniasm

LINKS

Scaffolding genome assembly with error-containing long sequence (e.g., ONT or PacBio reads, draft genomes)

Software (Perl)

https://github.com/warrenlr/LINKS/

Read clustering

afcluster

Clustering of reads from different genes and different species based on k-mer counts

Software (C++)

https://github.com/luscinius/afcluster

QCluster

Clustering of reads with alignment-free measures (k-mer based) and quality values

Software (C++)

http://www.dei.unipd.it/~ciompin/main/qcluster.html

Reads error correction

Lighter

Correction of sequencing errors in raw, whole genome sequencing reads (k-mer based)

Software (C++)

https://github.com/mourisl/Lighter

QuorUM

Error corrector for Illumina reads using k-mers

Software (C++)

https://github.com/gmarcais/Quorum

Trowel

Software (C++)

https://sourceforge.net/projects/trowel-ec/

Metagenomics

Assembly-free phylogenomics

AAF

Phylogeny reconstruction directly from unassembled raw sequence data from whole genome sequencing projects; provides bootstrap support to assess uncertainty in the tree topology (k-mer based)

Software (Python)

https://github.com/fanhuan/AAF

kSNP v3

Reference-free SNP identification and estimation of phylogenetic trees using SNPs (based on k-mer analysis)

Software (C)

https://sourceforge.net/projects/ksnp/files/

NGS-MC

Phylogeny of species based on NGS reads using alignment-free sequence dissimilarity measures d2* and d2 S under different Markov chain models (using k-words)

R package

http://www-rcf.usc.edu/~fsun/Programs/NGS-MC/NGS-MC.html

Species identification/taxonomic profiling

CLARK

Taxonomic classification of metagenomic reads to known bacterial genomes using k-mer search and LCA assignment

Software (C++)

http://clark.cs.ucr.edu/

FOCUS

Reports organisms present in metagenomic samples and profiles their abundances (uses composition-based approach and non-negative least squares for prediction)

Web service Software (Python)

http://edwards.sdsu.edu/FOCUS/

GSM

Estimation of abundances of microbial genomes in metagenomic samples (k-mer based)

Software (Go)

https://github.com/pdtrang/GSM

Mash

Species identification using assembled or unassembled Illumina, PacBio, and ONT data (based on MinHash dimensionality-reduction technique)

Software (C++)

https://github.com/marbl/mash

Kraken

Taxonomic assignment in metagenome analysis by exact k-mer search; LCA assignment of short reads based on a comprehensive sequence database

Software (C++)

https://ccb.jhu.edu/software/kraken/

LMAT

Assignment of taxonomic labels to reads by k-mers searches in precomputed database

Software (C++/Python)

https://sourceforge.net/projects/lmat/

stringMLST

k-mer-based tool for MLST directly from the genome sequencing reads

Software (Python)

http://jordan.biology.gatech.edu/page/software/stringMLST

Taxonomer

k-mer-based ultrafast metagenomics tool for assigning taxonomy to sequencing reads from clinical and environmental samples

Web service

http://taxonomer.iobio.io/

Other

d2-tools

Word-based (k-tuple) comparison (pairwise dissimilarity matrix using d2S measure) of metatranscriptomic samples from NGS reads

Software (Python/R)

https://code.google.com/p/d2-tools/

VirHostMatcher

Prediction of hosts from metagenomic viral sequences based on ONF using various distance measures (e.g., d2)

Software (C++)

https://github.com/jessieren/VirHostMatcher

MetaFast

Statistics calculation of metagenome sequences and the distances between them based on assembly using de Bruijn graphs and Bray–Curtis dissimilarity measure

Software (Java)

https://github.com/ctlab/metafast

AIRVF: a filtering toolbox for precise variant calling in Ion Torrent sequencing

BioStar — Fri, 22 Dec 2017 00:31:06 -0600

AIRVF that works on flowgram, raw and mapped reads and called variants to reduce artifact-driven false variant calls. Tests on sequencing data of standard reference material showed up to ∼98% reduction of false variants when combined to conventional public pipelines and ∼48% to the in-house commercial solution, with a minimal loss of sensitivity

The program with a detailed manual is available at https://sourceforge.net/projects/airvf/

Address of the bookmark: https://sourceforge.net/projects/airvf/

ALPACA: A hybrid strategy for assembly of genomic DNA shotgun sequencing reads.

Seema Singh — Mon, 30 Apr 2018 04:38:40 -0500

ALPACA requires Celera Assembler 8.3 or later. It is recommended to build Celera Assembler from source. (Why? The pre-built binaries CA_8.3rc1 and CA8.3rc2 will work for any large data set.

Detail paper at https://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-017-3927-8

Address of the bookmark: https://github.com/VicugnaPacos/ALPACA

HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies

Jit — Tue, 15 May 2018 07:35:26 -0500

HapCUT2 is a maximum-likelihood-based tool for assembling haplotypes from DNA sequence reads, designed to "just work" with excellent speed and accuracy. We found that previously described haplotype assembly methods are specialized for specific read technologies or protocols, with slow or inaccurate performance on others. With this in mind, HapCUT2 is designed for speed and accuracy across diverse sequencing technologies, including but not limited to: NGS short reads (Illumina HiSeq) clone-based sequencing (Fosmid or BAC clones) SMRT reads (PacBio) Oxford Nanopore reads 10X Genomics Linked-Reads proximity-ligation (Hi-C) reads high-coverage sequencing (>40x coverage-per-SNP) using above technologies combinations of the above technologies (e.g. scaffold long reads with Hi-C reads) See below for specific examples of command line options and best practices for some of these technologies. NOTE: At this time HapCUT2 is for diploid organisms only. VCF input should contain diploid variants. If you use HapCUT2 in your research, please cite: Edge, P., Bafna, V. & Bansal, V. HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies. Genome Res. gr.213462.116 (2016). doi:10.1101/gr.213462.116

Address of the bookmark: https://github.com/vibansal/HapCUT2

npScarf: real-time scaffolder using SPAdes contigs and Nanopore sequencing reads

Shruti Paniwala — Mon, 11 Jun 2018 05:14:57 -0500

npScarf (jsa.np.npscarf) is a program that connect contigs from a draft genomes to generate sequences that are closer to finish. These pipelines can run on a single laptop for microbial datasets. In real-time mode, it can be integrated with simple structural analyses such as gene ordering, plasmid forming.

Address of the bookmark: http://japsa.readthedocs.io/en/latest/tools/jsa.np.npscarf.html

Indexcov: fast coverage quality control for whole-genome sequencing

Jit — Wed, 29 Aug 2018 09:20:46 -0500

indexcov, an efficient estimator of whole-genome sequencing coverage to rapidly identify samples with aberrant coverage profiles, reveal large-scale chromosomal anomalies, recognize potential batch effects, and infer the sex of a sample. Indexcov is available at https://github.com/brentp/goleft under the MIT license.

Address of the bookmark: https://github.com/brentp/goleft

d2Tools: The toolbox for counting the frequency of k-tuple from sequencing datasets and calculate the dissimilarity

Jit — Thu, 20 Sep 2018 08:38:29 -0500

d2Tools are the toolbox for counting the frequency of K-tuple from sequencing datasets and then calculating the pairwise dissimilarity matrix between samples with the d2-style(d2/d2*/d2S representing d2/d2Star/d2shepp, respectively) measures. Hao, Dai, Eucliean, Mahattan, and Chebyshev distance measures are also included in d2Tools.

Manual at https://code.google.com/archive/p/d2-tools/wikis/d2ToolMannual.wiki

Address of the bookmark: https://code.google.com/archive/p/d2-tools/

sim3C: Read-pair simulation of 3C-based sequencing methodologies (HiC, Meta3C, DNase-HiC)

Jit — Tue, 13 Nov 2018 07:25:38 -0600

Required python modules

biopython
intervaltree
numpy
scipy
tqdm
PyYAML

Address of the bookmark: https://github.com/cerebis/sim3C

NGS Platforms launched by BGI’s MGI Tech

Jit — Thu, 10 Jan 2019 04:42:06 -0600

MGI Tech Co., Ltd. (MGI), a subsidiary of BGI Group, is committed to enabling effective and affordable healthcare solutions for all. Based on its proprietary technology, MGI produces sequencing devices, equipment, consumables and reagents to support life science research, medicine and healthcare. MGI's multi-omics platforms include genetic sequencing, mass spectrometry and medical imaging. Providing real-time, comprehensive, life-long solutions, its mission is to develop and promote advanced life science tools for future healthcare.

MGI, a subsidiary of global genomics leader BGI Group, announced pricing and its first early access customer for the new ultra high-throughput sequencer, MGISEQ-T7, saying it has driven down sequencing cost to $5 per gigabyte, with exceptionally high accuracy. Such innovations are helping more people to realize the benefits of genomic information.

In October, MGI launched the MGISEQ-T7, a highly flexible production-scale platform that is the most powerful sequencer to date. It can produce as many as 60 whole human genomes in one day. The instrument sells for $1 million.

The T7 enables simultaneous but independent operation of up to four flow cells, which means different applications such as single-cell RNA sequencing, whole exome sequencing and whole genome sequencing can be run in different flow cells at the same time. This helps to reduce costs, allowing MGI to offer the most competitive sequencing price in the market.

Powered by DNBseq™, MGISEQ delivers quality data with accuracy for SNP and Indel calling rate of 99.9% and 99%, respectively, along with decreased duplication rate down to less than 2 percent, and almost zero Index mis-assignment rate.

SOURCE MGI

https://www.bgi.com/global/company/news/bgis-mgi-tech-launches-two-new-ngs-platforms/

http://en.mgitech.cn/

jackalope: A swift, versatile phylogenomic and high-throughput sequencing simulator

Abhimanyu Singh — Fri, 26 Jul 2019 00:58:12 -0500

jackalope simply and efficiently simulates (i) variants from reference genomes and (ii) reads from both Illumina and Pacific Biosciences (PacBio) platforms. It can either read reference genomes from FASTA files or simulate new ones. Genomic variants can be simulated using summary statistics, phylogenies, Variant Call Format (VCF) files, and coalescent simulations—the latter of which can include selection, recombination, and demographic fluctuations. jackalope can simulate single, paired-end, or mate-pair Illumina reads, as well as reads from Pacific Biosciences These simulations include sequencing errors, mapping qualities, multiplexing, and optical/PCR duplicates. All outputs can be written to standard file formats.

A swift, versatile phylogenomic and high-throughput sequencing simulator https://jackalope.lucasnell.com

Address of the bookmark: https://github.com/lucasnell/jackalope