BOL: Related items

BBMap/BBTools package: Multipurpose tool designed for converting reads or other nucleotide data between different formats.

Jit — Mon, 13 Jun 2016 05:47:21 -0500

Reformatis a member of the BBMap/BBTools package. It is a multipurpose tool designed for converting reads or other nucleotide data between different formats. It supports, and can inter-convert:

fastq
fasta
fasta+qual
sam
scarf (an old Illumina format)
bam (if samtools is installed)
gzip
zip
ascii-33 (sanger)
ascii-64 (old Illumina)
paired files
interleaved files

It is multithreaded and can process data at over 500 megabytes per second, and can accept streams from standard in and write to standard out, allowing it to be easily dropped into the middle of a pipeline for format conversion. Reformat autodetects formats based on file extensions and content, making it very easy to use; and the autodetection can be overridden, allowing flexibility for people who don't like to follow naming conventions, or out-of-spec fastq files with qualities values like -17 or 120.

The program has been gradually expanded, and can now perform various other functions. None of these will break pairing, if the input is paired.

Quality trimming (either or both ends)
Quality filtering
Fixed-length trimming
Generation of histograms (base composition, quality, etc)
Subsampling (to a fraction of input reads, or an exact number of reads or bases)
Changing fasta line-wrapping length
Reverse-complementing (all reads or only read 2)
Adding /1 and /2 suffix to read names
GC-content filtering
Length-filtering
Testing for corrupted interleaved files

Reformat is compatible with any platform that supports Java 1.7 or higher. It also has a bash shellscript for simpler invocation. Typical usage examples:

Reformat fastq into fasta:
reformat.sh in=x.fq out=y.fa

Interleave paired reads:
reformat.sh in1=x1.fq in2=x2.fq out=y.fq

Note - you can actually use a shortcut if paired read files have the same name with a 1 and a 2. This is equivalent to the above command:
reformat.sh in=x#.fq out=y.fq

De-interleave reads:
reformat.sh in=x.fq out1=y1.fq out2=y2.fq

Verify that interleaving appears correct, assuming Illumina namimg conventions:
reformat.sh in=x.fq vint

Convert ASCII-33 to ASCII-64:
reformat.sh in=x.fq out=y.fq qin=33 qout=64

Quality-trim paired reads to Q10 on the left and right ends and discard reads shorter than 50bp after trimming:
reformat.sh in1=x1.fq in2=x2.fq out1=y1.fq out2=y2.fq outsingle=singletons.fq qtrim=rl trimq=10 minlength=50

Subsample 10% of the first 20000 pairs in an interleaved file:
reformat.sh in=x.fq out=y.fq reads=20000 samplerate=0.1 int=t
(in this case "int=t" overrides interleaving autodetection, to ensure reads are treated as pairs)

Pipe in a gzipped sam file and pipe out fasta:
reformat.sh in=stdin.sam.gz out=stdout.fa

Reverse-complement reads:
reformat.sh in=x.fq out=y.fq rcomp

For reformatting a file with very long sequences, Reformat will need more memory; just add the additional flag "-Xmx2g". For example, to change the line-wrapping length on the human genome (which has individual sequences over 200Mbp long) to 70 characters:
reformat.sh -Xmx2g in=HG19.fa.gz out=HG19_wrapped.fa.gz fastawrap=70

For additional functions, please run the shellscript with no arguments, or just read it with a text editor. If you have any questions, please post them in this thread.

For people using a non-bash terminal, you may need to type "bash reformat.sh" instead of just "reformat.sh".
For users of Windows or other platforms that do not support bash shellscripts, replace "reformat.sh" with "java -ea -Xmx200m /path/to/bbmap/current/ jgi.ReformatReads"
for example,
java -ea -Xmx200m C:\bbmap\current\ jgi.ReformatReads in=x.fq out=y.fa

Reformat can be downloaded with BBTools here:
https://sourceforge.net/projects/bbmap/

EXCAVATOR2tool

Bulbul — Wed, 30 Nov 2016 04:09:19 -0600

EXCAVATOR2 is a collection of bash, R and Fortran scripts and codes that analyses Whole Exome Sequencing (WES) data to identify CNVs. EXCAVATOR2 enhances the identification of all genomic CNVs, both overlapping and non-overlapping targeted exons by integrating the analysis of In-targets and Off- targets reads. Specifically, it improves the precision of calling CNVs overlapping targeted exons from WES data and enlarges the spectrum of detectable CNVs to off-target events.
EXCAVATOR2 can be effectively employed for the identification of CNVs in small as well as large-scale re-sequencing population and cancer studies. Lastly, it’s of particular interest that all WES experiments can be re-analysed using our method with the beneficial effect to identify novelCNVs in extra-exonic regions by having the full-genome CN profile.

Address of the bookmark: https://sourceforge.net/projects/excavator2tool/

YAHA

Jit — Fri, 20 Jan 2017 05:38:05 -0600

YAHA, a fast and flexible hash-based aligner. YAHA is as fast and accurate as BWA-SW at finding the single best alignment per query and is dramatically faster and more sensitive than both SSAHA2 and MegaBLAST at finding all possible alignments. Unlike other aligners that report all, or one, alignment per query, or that use simple heuristics to select alignments, YAHA uses a directed acyclic graph to find the optimal set of alignments that cover a query using a biologically relevant breakpoint penalty. YAHA can also report multiple mappings per defined segment of the query. We show that YAHA detects more breakpoints in less time than BWA-SW across all SV classes, and especially excels at complex SVs comprising multiple breakpoints.

Availability: YAHA is currently supported on 64-bit Linux systems. Binaries and sample data are freely available for download from http://faculty.virginia.edu/irahall/YAHA.

Contact:

http://genome.wustl.edu/people/groups/detail/hall-lab/

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3463118/

Pacbio Long Reads Compatible Software and Tools

Archana Malhotra — Wed, 15 Mar 2017 14:19:01 -0500

The following software packages are known to be compatible with PacBio® data, in addition to PacBio's own SMRT® Analysis suite. All packages are believed to be open source or freely available for non-commercial use. See the individual project sites for up-to-date license information. A separate page lists commercial software.

Know of any other open source software for PacBio data? Email us.

Software categories:

Address of the bookmark: https://github.com/PacificBiosciences/DevNet/wiki/Compatible-Software

The "Ifs" and "Buts" of NGS Quality Control and Trimming

BioStar — Thu, 02 Jan 2025 20:11:07 -0600

Next-Generation Sequencing (NGS) has revolutionized biological research, providing vast amounts of data for a wide range of applications. However, the reliability of NGS analyses heavily depends on the quality of raw sequencing data. Quality control (QC) and trimming are critical preprocessing steps that can make or break your downstream analyses. In this blog, we explore the "ifs" (why you should perform QC and trimming) and the "buts" (challenges or considerations) of this vital step in NGS workflows.

The "Ifs" of NGS QC and Trimming

Ensures Data Integrity
If you want to minimize errors in downstream analyses, QC and trimming remove low-quality reads and bases, ensuring high-confidence data. This step is essential for reliable variant calling, assembly, and other applications.
Removes Contaminants
If adapter sequences or contaminants are present in the raw reads, trimming can eliminate them. This prevents issues like misalignment or incorrect biological interpretations, ensuring cleaner data for analysis.
Improves Mapping and Assembly
If your goal is better alignment to a reference genome or improved de novo assembly, trimming low-quality bases and adapters is critical. High-quality reads map more efficiently and generate more accurate assemblies.
Reduces Computational Load
If you want to save computational resources, trimming reduces the dataset size, which speeds up processing and analysis. Clean datasets mean less computational time spent on processing low-quality data.
Prepares for Standardized Analyses
If your project involves multiple datasets, QC and trimming ensure uniformity across them. This standardization makes comparisons valid and reproducible, particularly in large collaborative studies.

The "Buts" of NGS QC and Trimming

Risk of Over-Trimming
But excessive trimming can lead to the loss of informative sequences, reducing read depth and potentially discarding biologically relevant data. This is especially critical in studies with limited sequencing depth.
Bias Introduction
But trimming algorithms might introduce biases, especially if they inadvertently remove sequences with specific biological patterns. This can skew results and compromise biological insights.
Loss of Context in Paired-End Reads
But trimming one read in a pair more than the other can lead to loss of pairing information. This complicates downstream analyses that rely on paired-end data, such as structural variant detection.
Time and Resource Intensive
But running QC and trimming for large datasets can be computationally expensive and time-consuming. As sequencing depth increases, preprocessing becomes a bottleneck in the analysis pipeline.
Variable Standards
But the criteria for trimming (e.g., quality threshold, minimum read length) can vary between tools and datasets. This variability may affect reproducibility and comparability of results across studies.

Balancing the "Ifs" and "Buts"

To maximize the benefits of QC and trimming while mitigating the challenges, consider the following best practices:

Use QC Tools Wisely: Start with tools like FastQC to identify quality issues in your raw data. Visualizing quality metrics helps tailor your trimming parameters.
Choose Reliable Trimming Tools: Tools like Trimmomatic, Cutadapt, and BBduk offer adaptive and customizable trimming options. Select one that aligns with your dataset and project goals.
Set Reasonable Parameters: Avoid over-trimming by setting quality thresholds and minimum read lengths that balance data retention and quality improvement.
Test Downstream Effects: Validate the impact of QC and trimming on downstream analyses, such as alignment efficiency, variant calling accuracy, or assembly quality.
Document Your Workflow: Maintain detailed records of the parameters and tools used for QC and trimming. This ensures reproducibility and enables better troubleshooting.

Conclusion

NGS quality control and trimming are essential steps to ensure reliable and accurate data for analysis. While the "ifs" highlight the clear benefits of these steps, the "buts" remind us of the potential pitfalls. By adopting best practices and carefully balancing these considerations, you can optimize your preprocessing workflow and unlock the full potential of your sequencing data.

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

BioJoker — Tue, 02 Apr 2019 21:54:55 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye

Gene Finding and Predictions

Poonam Mahapatra — Fri, 26 Aug 2016 07:26:27 -0500

In this exercise, a previously annotated gene will be used to measure the accuracy of different gene finding approaches. GRAIL, GENSCAN, geneid, FGENESH, GenomeScan, GrailEXP and GENEWISE will be used to annotate the sequence. Both search by signal, content and homology (protein and cDNA sequences) methods will be employed in order to improve the ab initio results. Weak conservation of Start codons will lead to wrong prediction of initial exons in most cases.

http://genome.crg.es/courses/Bioinformatics2003_genefinding/

Address of the bookmark: http://genome.crg.es/courses/Bioinformatics2003_genefinding/

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads

Jit — Wed, 07 Jun 2017 04:18:16 -0500

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads http://www.nature.com/ncomms/2016/160415/ncomms11307/full/ncomms11307.html

Features

    Mapping position agnostic to alignment parameters.
    Consistently very high sensitivity and precision across different error profiles, rates and sequencing technologies even with default parameters.
    Circular genome handling to resolve coverage drops near ends of the genome.
    E-value.
    Meaningful mapping quality.
    Various alignment strategies (semiglobal bit-vector and Gotoh, anchored).
    Overlapping of reads for de novo assembly.
    Transcriptome mapping through internal construction of a transcriptome from a given genomic reference and a GTF file.
    ...and much more.

GraphMap is also used as an overlapper in a new de novo genome assembly project called Ra (https://github.com/mariokostelac/ra-integrate).
Ra attempts to create de novo assemblies from raw nanopore and PacBio reads without requiring error correction, for which a highly sensitive overlapper is required.

Currently, development of a new spliced-alignment mode for mapping RNA-seq reads is under way.
Description of the current effort as well as how to reach the experimental implementation can be found here: doc/rnaseq.md.

Address of the bookmark: https://github.com/isovic/graphmap

SALSA: A tool to scaffold long read assemblies with Hi-C

Jit — Fri, 15 Jun 2018 04:01:15 -0500

This code is used to scaffold your assemblies using Hi-C data. This version implements some improvements in the original SALSA algorithm. If you want to use the old version, it can be found in the old_salsa branch. To use the latest version, first run the following commands: cd SALSA make To run the code, you will need Python 2.7, BOOST libraries and Networkx(version lower than 1.2). If you consider using this tool, please cite our publication which describes the methods used for scaffolding. Ghurye, J., Pop, M., Koren, S., Bickhart, D., & Chin, C. S. (2017). Scaffolding of long read assemblies using long range contact information. BMC genomics, 18(1), 527. Link Ghurye, J., Rhie, A., Walenz, B.P., Schmitt, A., Selvaraj, S., Pop, M., Phillippy, A.M. and Koren, S., 2018. Integrating Hi-C links with assembly graphs for chromosome-scale assembly. bioRxiv, p.261149 Link For any queries, please either ask on github issue page or send an email to Jay Ghurye (jayg@cs.umd.edu).

Address of the bookmark: https://github.com/machinegun/SALSA

LR_Gapcloser: a tiling path-based gap closer that uses long reads to complete genome assembly

Rahul Nayak — Thu, 14 May 2020 15:09:52 -0500

LR_Gapcloser is a gap closing tool using long reads from studied species. The long reads could be downloaed from public read archive database (for instance, NCBI SRA database ) or be your own data. Then they are fragmented and aligned to scaffolds using BWA mem algorithm in BWA package. In the package, we provided a compiled bwa, so the user needn't to install bwa. LR_Gapcloser uses the alignments to find the bridging that cross the gap, and then fills the long read original sequence into the genomic gaps.

Address of the bookmark: https://github.com/CAFS-bioinformatics/LR_Gapcloser