BOL: Related items

QuorUM: An Error Corrector for Illumina Reads

Jit — Wed, 08 Nov 2017 11:40:41 -0600

Illumina Sequencing data can provide high coverage of a genome by relatively short (most often 100 bp to 150 bp) reads at a low cost. Even with low (advertised 1%) error rate, 100 × coverage Illumina data on average has an error in some read at every base in the genome. These errors make handling the data more complicated because they result in a large number of low-count erroneous k-mers in the reads. However, there is enough information in the reads to correct most of the sequencing errors, thus making subsequent use of the data (e.g. for mapping or assembly) easier. Here we use the term “error correction” to denote the reduction in errors due to both changes in individual bases and trimming of unusable sequence. We developed an error correction software called QuorUM. QuorUM is mainly aimed at error correcting Illumina reads for subsequent assembly. It is designed around the novel idea of minimizing the number of distinct erroneous k-mers in the output reads and preserving the most true k-mers, and we introduce a composite statistic π that measures how successful we are at achieving this dual goal. We evaluate the performance of QuorUM by correcting actual Illumina reads from genomes for which a reference assembly is available.

QuorUM is distributed as an independent software package and as a module of the MaSuRCA assembly software. Both are available under the GPL open source license at http://www.genome.umd.edu.

Address of the bookmark: http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0130821

Consed--A Finishing Package (BAM File Viewer, Assembly Editor, Autofinish, Autoreport, Autoedit, and Align Reads To Reference Sequence)

Neel — Fri, 07 Feb 2020 07:16:22 -0600

Supports Illumina, 454, other Next-Gen and Sanger Reads and allows mixtures of these read types
Consed includes BamScape which can view bam files with unlimited numbers of reads. BamScape can bring up consed to edit reads and the reference sequence in targeted regions.
Consed is compatible with Newbler, Cross_match, Phrap, MIRA, Velvet and PCAP output.
Quickly takes the user to each variant site for viewing (also available as an automated report)
Overview of assembly can help detect and fix misassemblies
Editing time reduced by the program's ability to pin-point problem areas
Editing is guided by error probabilities

Address of the bookmark: http://www.phrap.org/consed/consed.html

HapSolo: An optimization approach for removing secondary haplotigs during diploid genome assembly and scaffolding.

Jit — Mon, 26 Oct 2020 21:23:36 -0500

Despite marked recent improvements in long-read sequencing technology, the assembly of diploid genomes remains a difficult task. A major obstacle is distinguishing between alternative contigs that represent highly heterozygous regions. If primary and secondary contigs are not properly identified, the primary assembly will overrepresent both the size and complexity of the genome, which complicates downstream analysis such as scaffolding.

More at https://github.com/esolares/HapSolo

Address of the bookmark: https://github.com/esolares/HapSolo

Release Notes for Genome Workbench 2.10.5

Jit — Thu, 12 May 2016 13:49:41 -0500

New Features in latest release

New ProSplign tool integrated with Genome Workbench (Tutorial, Video)
New export function for BAM/cSRA coverage graphs (Tutorial)
New export function for alignments GFF3 format ((Tutorial))
Tree View: implemented new export mode based on selections (tutorial coming)
Tree View: added support for distance based circular trees
Tree View: new rooting mode (Midpoint Root) results in more balanced trees (Tutorial)
Tree View: added possibility to right-click on an edge between two nodes and "Place Root at Middle of Branch" – to re-root at mid-branch (Tutorial)

Mauve: a system for constructing multiple genome alignments in the presence of large-scale evolutionary events such as rearrangement and inversion

Jit — Sat, 24 Dec 2016 09:20:53 -0600

Mauve is a system for constructing multiple genome alignments in the presence of large-scale evolutionary events such as rearrangement and inversion. Multiple genome alignments provide a basis for research into comparative genomics and the study of genome-wide evolutionary dynamics.

Mauve has been developed with the idea that a multiple genome aligner should require only modest computational resources. It employs algorithmic techniques that scale well in the lengths of sequences being aligned. For example, a pair of Y. pestis genomes can be aligned in under a minute, while a group of 9 divergent Enterobacterial genomes can be aligned in a few hours. However, the current algorithm’s compute time (progressiveMauve) scales cubically in the number of genomes to align, making it unsuitable for datasets containing more than 50-100 bacterial genomes.

Address of the bookmark: http://darlinglab.org/mauve/mauve.html

gbtools: Interactive Visualization of Metagenome Bins in R

Jit — Sun, 26 Mar 2017 15:41:31 -0500

We have developed gbtools, a software package that allows users to visualize metagenomic assemblies by plotting coverage (sequencing depth) and GC values of contigs, and also to annotate the plots with taxonomic information. Different sets of annotations, including taxonomic assignments from conserved marker genes or SSU rRNA genes, can be imported simultaneously; users can choose which annotations to plot. Bins can be manually defined from plots, or be imported from third-party binning tools and overlaid onto plots, such that results from different methods can be compared side-by-side. gbtools reports summary statistics of bins including marker gene completeness, and allows the user to add or subtract bins with each other.

Tool at https://github.com/kbseah/genome-bin-tools

Address of the bookmark: http://journal.frontiersin.org/article/10.3389/fmicb.2015.01451/full

BBSplit: Read Binning Tool for Metagenomes and Contaminated Libraries

Poonam Mahapatra — Wed, 03 Jan 2018 00:25:27 -0600

BBSplit internally uses BBMap to map reads to multiple genomes at once, and determine which genome they match best. This is different than with ordinary mapping. If a genome (say, human) contains an exact repeat somewhere, reads mapping to it will be mapped ambiguously. But if you want to determine whether reads are mouse or human, it does not matter whether they map ambiguously within human, only whether they are ambiguous between human and mouse. BBSplit tracks this additional ambiguity information and decides how to use it based on the “ambig2” flag. The normal use of BBSplit is like Seal, either quantifying how many reads go to each reference, or splitting the reads into multiple output files, one per reference. BBSplit can only be run using references indexed with BBSplit, as they contain additional information regarding which sequences came from which reference file.

BBSplit is a tool that bins reads by mapping to multiple references simultaneously, using BBMap. The reads go to the bin of the reference they map to best. There are also disambiguation options, such that reads that map to multiple references can be binned with all of them, none of them, one of them, or put in a special "ambiguous" file for each of them. Paired reads will always be kept together.

For example, if you had a library of something that was contaminated with e.coli and salmonella, you could do this:

bbsplit.sh in=reads.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu=clean.fq int=t

This will produce 3 output files:
out_ecoli.fq (ecoli reads)
out_salmonella.fq (salmonella reads)
clean.fq (unmapped reads)

In this case, "int=t" means that the input file is paired and interleaved. For single-end reads you would leave that out. For paired reads in 2 files, you would do this:
bbsplit.sh in1=reads1.fq in2=reads2.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu1=clean1.fq outu2=clean2.fq

BBSplit is available here:
https://sourceforge.net/projects/bbmap/

The sensitivity can be raised to be equivalent to BBMap with these flags: "minratio=0.56 minhits=1 maxindel=16000"

MGERT: Mobile Genetic Elements Retrieving Tool

Neel — Sat, 18 May 2019 08:58:01 -0500

MGERT is a computational pipeline for easy retrieving of MGE's coding sequences of a particular family from genome assemblies. MGERT utilizes several established bioinformatic tools combined into single pipeline which hides different technical quirks from an inexperienced user.

Address of the bookmark: https://github.com/andrewgull/MGERT

Panacus : A Counting Tool for Pangenome Graphs

Neel — Fri, 14 Jun 2024 14:42:28 -0500

panacus is a tool for calculating statistics for GFA files. It supports GFA files with P and W lines, but requires that the graph is blunt, i.e., nodes do not overlap and consequently, each link (L) points from the end of one segment (S) to the start of another.

panacus supports the following calculations:

coverage histogram
pangenome growth statistics
path-/group-resolved coverage table

Address of the bookmark: https://github.com/marschall-lab/panacus

DAVI: Deep learning-based tool for alignment and single nucleotide variant identification

Jit — Tue, 16 Mar 2021 05:41:33 -0500

DAVI consists of models for both global and local alignment and for variant calling. We have evaluated the performance of DAVI against existing state-of-the-art tool sets and found that its accuracy and performance is comparable to existing tools used for bench-marking. We further demonstrate that while existing tools are based on data generated from a specific sequencing technology, the models proposed in DAVI are generic and can be used across different NGS technologies as well as across different species

https://iopscience.iop.org/article/10.1088/2632-2153/ab7e19/pdf

Address of the bookmark: https://github.com/gguptaiitd/NEAT