Structural variants (SVs) such as deletions, insertions, duplications, inversions and translocations litter genomes and are often associated with gene expression changes and severe phenotypes (ie. genetic diseases in humans). Recent studies on the functional aspects of different types of SVs have unveiled several cases of adaptive evolution. For example, inversions have been associated with ecological adaptations and may facilitate speciation. Due to their prevalent nature, SVs arguably have a large impact on genome evolution and should not be neglected when studying the genetics of adaptation and speciation. SVs were classically defined as chromosomal rearrangements larger than 1kb, but due to a higher resolution of new detection methods, smaller variants (between 50 and 1000 base pairs) can now be accurately assessed. Besides various methods of detection in next generation sequencing data (paired end mapping, split reads, and depth of coverage), array-based approaches have proven to be particularly useful for detecting copy number variations (CNVs). These technologies have enabled researchers to catalog a wide spectrum of SVs in many organisms and infer the effects of selection shaping their evolutionary trajectories.

Structure variation sequencing signature (Source: NatRev Genetics)

Related tools, databases and publications are listed below. If you know any interesing papers, please let us know in comment section:

Key concepts

Structural variation includes balanced variants such as inversions and translocations, and unbalanced ones such as duplications and deletions (copy number variations or CNVs).

Structural variants can arise by several mechanisms, including nonallelic homologous recombination (NAHR), nonhomologous end‐joining (NHEJ) and DNA replication‐based fork stalling and template switching (FoSTeS).

CNV is closely linked to segmental duplication, but is not exactly the same. Segmental duplications can stimulate CNV formation by NAHR, and themselves arise from CNVs that have become fixed.

Segmental duplications did not appear uniformly during the evolution of the Great Ape species, but rather during a burst of activity around the time of the divergence of gorilla from the human/chimpanzee ancestor.

Duplicated genes play a critical role in the evolution of a genome as they act as ‘spare parts’ than can evolve to perform new or more specialized functions.

Effects of structural variation on gene expression can be identified but only a few examples of the consequences for species biology have been documented.

Tools

CNVnatora tool for CNV discovery and genotyping from depth of read mapping.2011a,2011b

AGEa tools that implements an algorithm for optimal alignment of sequences with SVs.2011

BreakSeqa pipeline for annotation, classification and analysis of SVs at single nucleotide resolution.2010

PEMera computational and simulation framework for discovering SVs by paired-end read mapping.2009,2007

GASV https://code.google.com/archive/p/gasv/

PAIROSCOPE http://pairoscope.sourceforge.net/

SVDetect http://svdetect.sourceforge.net/Site/Home.html

BreakPtr, discovery of unbalanced structural variants (copy-number variants) with tiling microarrays Link 

R Package https://www.bioconductor.org/help/course-materials/2010/EMBL2010/Practical-4-StructuralVariants.pdf

BreakSeq, structural variant genotyping using split reads Link 

CopySeq, genotyping of unbalanced structural variants (copy-number variants) using read-depth Link 

DELLY2, integrated structural variant discovery, genotyping and visualization in deep sequencing data Link 

PEMer, structural variant discovery in 454 sequencing data by paired-end mapping Link 

TIGER, transduction inference in germline genomes using short read data Link 

MANTA https://github.com/Illumina/manta

SV-Bay https://github.com/InstitutCurie/SV-Bay

BreakDancer http://breakdancer.sourceforge.net/

Variation Hunter http://compbio.cs.sfu.ca/software-variation-hunter

Lumpy https://github.com/arq5x/lumpy-sv

ForestSV http://sebatlab.ucsd.edu/index.php/software-data 

PBSuites for long reads https://sourceforge.net/projects/pb-jelly/

Visualization

The SV visualization tool: http://genomesavant.com/savant/

InGAP-SV (http://ingap.sourceforge.net/) that is nice tools for both detection and visualisation of severals kind of structural variations (Large insertions, translocation, deletion, inversions....) 

Tools table: http://www.nature.com/nbt/journal/v29/n8/fig_tab/nbt.1904_T2.html

Variation Viewer https://www.ncbi.nlm.nih.gov/variation/view/

Papers

http://www.nature.com/nmeth/journal/v9/n2/full/nmeth.1858.html

http://journal.frontiersin.org/researchtopic/1412/structural-variations-in-genomes-ecological-and-evolutionary-implications

http://www.mi.fu-berlin.de/wiki/pub/ABI/GenomicsLecture10Materials/structural-variation.pdf

http://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-015-1479-3

https://www.ncbi.nlm.nih.gov/dbvar/content/overview/

http://www.nature.com/subjects/structural-variation

https://eichlerlab.gs.washington.edu/news/NatMeth_Feb2012.pdf

https://www.ncbi.nlm.nih.gov/pubmed/19477992 ***

https://www.ncbi.nlm.nih.gov/pubmed/22452995

http://biorxiv.org/content/early/2016/09/06/073833

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4479793/

http://www.nature.com/articles/srep18501

http://www.genetics.org/content/202/1/351

http://www.cs.cmu.edu/~sssykim/teaching/s13/slides/Lecture_SVI.pdf

https://www.omicsonline.org/open-access/structural-variation-detection-from-next-generation-sequencing-2469-9853-S1-007.php?aid=69055

http://schatzlab.cshl.edu/presentations/2016/2016.01.12.PAG.Structural%20Variations.pdf

• paired-end (PE) and/or mate-pair libraries (NGS-based mode)
• long reads (NGS-based mode)
• synteny to the genome of some related species (reference-based mode)

Scaffolding 

In reference-based mode, pyScaf uses synteny to the genome of closely related species in order to order contigs and estimate distances between adjacent contigs.

Contigs are aligned globally (end-to-end) onto reference chromosomes, ignoring:

• matches not satisfying cut-offs (--identity and --overlap)
• suboptimal matches (only best match of each query to reference is kept)
• and removing overlapping matches on reference.

In preliminary tests, pyScaf performed superbly on simulated heterozygous genomes based on C. parapsilosis (13 Mb; CANPA) and A. thaliana (119 Mb; ARATH) chromosomes, reconstructing correctly all chromosomes always for CANPA and nearly always for ARATH (Figures in dropbox, CANPA table, ARATH table).
Runs took ~0.5 min for CANPA on 4 CPUs and ~2 min for ARATH on 16 CPUs.

Important remarks:

• Reduce your assembly before (fasta2homozygous.py) as any redundancy will likely break the synteny.
• pyScaf works better with contigs than scaffolds, as scaffolds are often affected by mis-assemblies (no de novo assembler / scaffolder is perfect...), which breaks synteny.
• pyScaf works very well if divergence between reference genome and assembled contigs is below 20% at nucleotide level.
• pyScaf deals with large rearrangements ie. deletions, insertion, inversions, translocations. Note however, this is experimental implementation!
• Consider closing gaps after scaffolding.

Address of the bookmark: https://github.com/lpryszcz/pyScaf

C Chiang, R M Layer, G G Faust, M R Lindberg, D B Rose, E P Garrison, G T Marth, A R Quinlan, and I M Hall. SpeedSeq: ultra-fast personal genome analysis and interpretation. Nat Meth (2015). doi:10.1038/nmeth.3505.

http://www.nature.com/nmeth/journal/vaop/ncurrent/full/nmeth.3505.html

Address of the bookmark: https://github.com/hall-lab/speedseq

Samtools

Reading/writing/editing/indexing/viewing SAM/BAM/CRAM format

BCFtools

Reading/writing BCF2/VCF/gVCF files and calling/filtering/summarising SNP and short indel sequence variants

HTSlib

A C library for reading/writing high-throughput sequencing data

Samtools and BCFtools both use HTSlib internally, but these source packages contain their own copies of htslib so they can be built independently.

Address of the bookmark: http://www.htslib.org/

http://sfg.stanford.edu/denovo.html

http://sfg.stanford.edu/sequencing.html

http://sfg.stanford.edu/BLAST.html

http://sfg.stanford.edu/denovo.html 

Address of the bookmark: http://sfg.stanford.edu/guide.html

Address of the bookmark: https://github.com/vice87/gam-ngs

The overview section of the BEDOPS v2.4.26 documentation summarizes the toolkit, functionality and performance enhancements. The reference table offers documentation for all applications and scripts.

Address of the bookmark: https://github.com/bedops/bedops

ABySS Explorer

Interactive Java application that uses a novel graph-based representation to display a sequence assembly and associated metadata

http://www.bcgsc.ca/platform/bioinfo/software/abyss-explorer

BamView

Genome browser and annotation tool that allows visualization of sequence features, next-generation sequencing (NGS) data and the results of analyses within the context of the sequence, and also its six-frame translation

http://www.sanger.ac.uk/resources/software/artemis/

DNannotator 

Annotation web toolkit for regional genomic sequences

http://bioapp.psych.uic.edu/DNannotator.htm

JVM 

Java Visual Mapping tool for NGS reads

http://www.springer.com/cda/content/document/cda_downloaddocument/9789401792448-c2.pdf?SGWID=0-0-45-1487072-p176815501

LookSeq 

Web-based visualization of sequences derived from multiple sequencing technologies. Low- or high-depth read pileups and easy visualization of putative single nucleotide and structural variation

http://lookseq.sourceforge.net

MagicViewer 

Visualization of short read alignment, identification of genetic variation and association with annotation information of a reference genome

http://bioinformatics.zj.cn/magicviewer/

MapView 

Alignments of huge-scale single-end and pair-end short reads

http://omictools.com/mapview-s1367.html

MultiPipMaker

Computes alignments of similar regions in two DNA sequences. The resulting alignments are summarized with a ‘percent identity plot’ (pip)

http://pipmaker.bx.psu.edu/pipmaker/

PileLineGUI 

Handling genome position files in NGS studies

http://sing.ei.uvigo.es/pileline/pilelinegui.html

SAMtools tview 

Simple and fast text alignment viewer; NGS compatible

http://www.htslib.org/

SEWAL

Uses a locality-sensitive hashing algorithm to enumerate all unique sequences in an entire Illumina sequencing run

http://www.sourceforge.net/projects/sewal

STAR 

A web-based integrated solution to management and visualization of sequencing data

http://wanglab.ucsd.edu/star/browser

SVA 

Software for annotating and visualizing sequenced human genomes

http://www.svaproject.org

Viewer (IGV) 

Visualization of large heterogeneous datasets, providing a smooth and intuitive user experience at all levels of genome resolution

https://www.broadinstitute.org/igv/

ZOOM Lite 

NGS data mapping and visualization software

http://bioinfor.com/zoom/lite/

## Package Plan ##

environment location: /home/urbe/anaconda3

added / updated specs:
- salmon

The following packages will be downloaded:

package | build
---------------------------|-----------------
boost-1.64.0 | py36_4 331 KB conda-forge
jemalloc-5.1.0 | hfc679d8_0 8.2 MB conda-forge
boost-cpp-1.64.0 | 1 17.8 MB conda-forge
salmon-0.10.2 | 1 3.7 MB bioconda
conda-4.5.5 | py36_0 624 KB conda-forge
tbb-2018_20171205 | 0 1.2 MB conda-forge
------------------------------------------------------------
Total: 31.8 MB

The following NEW packages will be INSTALLED:

boost: 1.64.0-py36_4 conda-forge
boost-cpp: 1.64.0-1 conda-forge
jemalloc: 5.1.0-hfc679d8_0 conda-forge
salmon: 0.10.2-1 bioconda
tbb: 2018_20171205-0 conda-forge

The following packages will be UPDATED:

conda: 4.5.4-py36_0 conda-forge --> 4.5.5-py36_0 conda-forge

Proceed ([y]/n)? y

Downloading and Extracting Packages
boost-1.64.0 | 331 KB | ####################################################################################################################################### | 100%
jemalloc-5.1.0 | 8.2 MB | ####################################################################################################################################### | 100%
boost-cpp-1.64.0 | 17.8 MB | ####################################################################################################################################### | 100%
salmon-0.10.2 | 3.7 MB | ####################################################################################################################################### | 100%
conda-4.5.5 | 624 KB | ####################################################################################################################################### | 100%
tbb-2018_20171205 | 1.2 MB | ####################################################################################################################################### | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done