BOL: Related items

RepeatModeler

Jit — Thu, 18 Aug 2016 09:57:15 -0500

RepeatModeler is a de-novo repeat family identification and modeling package. At the heart of RepeatModeler are two de-novo repeat finding programs ( RECON and RepeatScout ) which employ complementary computational methods for identifying repeat element boundaries and family relationships from sequence data. RepeatModeler assists in automating the runs of RECON and RepeatScout given a genomic database and uses the output to build, refine and classify consensus models of putative interspersed repeats.

Address of the bookmark: http://www.repeatmasker.org/RepeatModeler.html

TGNet

Shruti Paniwala — Wed, 24 Aug 2016 05:36:36 -0500

Recent technological progress has greatly facilitated de novo genome sequencing. However, de novo assemblies consist in many pieces of contiguous sequence (contigs) arranged in thousands of scaffolds instead of small numbers of chromosomes. Confirming and improving the quality of such assemblies is critical for subsequent analysis.

Visualization and quality assessment of de novo genome assemblies

Citation

This software is fully described in the paper:
Riba-Grognuz, Keller, Falquet, Xenarios & Wurm (2011) Visualization and quality assessment of de novo genome assemblies.

In brief, our scripts create Cytoscape files to visualize transcript evidence that suggests adjacency between scaffolds and contigs.

Software requirements

BLAT (tested with Standalone BLAT v. 32×1). Source Binaries .
Cytoscape (tested with versions 2.7.0, 2.8.2)
a UNIX machine (tested on Mac OS X 10.6 and CentOS 4.6)

Address of the bookmark: https://github.com/ksanao/TGNet

Useful Bioinformatics Tools

Poonam Mahapatra — Mon, 29 Aug 2016 04:08:12 -0500

Collections of few handy tools for bioinformatician

http://molbiol-tools.ca/Convert.htm

Address of the bookmark: http://molbiol-tools.ca/Convert.htm

BRAKER: pipeline for fully automated prediction of protein coding genes with GeneMark-ES/ET and AUGUSTUS in novel eukaryotic genomes

Jit — Thu, 01 Sep 2016 08:02:59 -0500

Gene finding in eukaryotic genomes is notoriously difficult to automate. The task is to design a work flow with a minimal set of tools that would reach state-of-the-art performance across a wide range of species. GeneMark-ET is a gene prediction tool that incorporates RNA-Seq data into unsupervised training and subsequently generates ab initio gene predictions. AUGUSTUS is a gene finder that usually requires supervised training and uses information from RNA-Seq reads in the prediction step. Complementary strengths of GeneMark-ET and AUGUSTUS provided motivation for designing a new combined tool for automatic gene prediction.

http://www.ncbi.nlm.nih.gov/pubmed/26559507

Address of the bookmark: http://bioinf.uni-greifswald.de/bioinf/braker/

Structural variants PPT

Jit — Wed, 07 Sep 2016 03:16:09 -0500

1000 Genomes data tutorial at ASHG

Structural variants presentation by

Jan Korbel

European Molecular Biology Laboratory (EMBL) Heidelberg Genome Biology Research Unit

Reference:

https://www.genome.gov/pages/research/der/1000genomesprojecttutorials/structuralvariants-jankorbel.pdf

BBMap help

Shruti Paniwala — Mon, 10 Oct 2016 06:29:03 -0500

BBMAP • a solution for everything

That content has been reformatted and it is being expanded to include more information.

There are common options for most BBMap suite programs and depending on the file extension the input/output format is automatically chosen/set.

Using BBMap

Mapping Nanopore reads

BBMap.sh has a length cap of 6kbp. Reads longer than this will be broken into 6kbp pieces and mapped independently.

More at https://www.biostarhandbook.com/tools/bbmap/bbmap-help.html

Address of the bookmark: https://www.biostarhandbook.com/tools/bbmap/bbmap-help.html

Ribbon !!

Jit — Fri, 21 Oct 2016 04:54:30 -0500

Visualization has played an extremely important role in the current genomic revolution to inspect and understand variants, expression patterns, evolutionary changes, and a number of other relationships. However, most of the information in read-to-reference or genome-genome alignments is lost for structural variations in the one-dimensional views of most genome browsers showing only reference coordinates. Instead, structural variations captured by long reads or assembled contigs often need more context to understand, including alignments and other genomic information from multiple chromosomes. We have addressed this problem by creating Ribbon (genomeribbon.com) an interactive online visualization tool that displays alignments along both reference and query sequences, along with any associated variant calls in the sample. This way Ribbon shows patterns in alignments of many reads across multiple chromosomes, while allowing detailed inspection of individual reads (Supplementary Note 1). For example, here we show a gene fusion in the SK-BR-3 breast cancer cell line linking the genes CYTH1 and EIF3H. While it has been found in the transcriptome previously, genome sequencing did not identify a direct chromosomal fusion between these two genes. After SMRT sequencing, Ribbon shows that there are indeed long reads that span from one gene to the other, going through not one but two variants, for the first time showing the genomic link between these two genes (Figure 1a). More gene fusions of this cancer cell line are investigated in Supplementary Note 2. Figure 1b shows another complex event in this sample made simple in Ribbon: the translocation of a 4.4 kb sequence deleted from chr19 and inserted into chr16 (Figure 1b). Thus, Ribbon enables understanding of complex variants, and it may also help in the detection of sequencing and sample preparation issues, testing of aligners and variant-callers, and rapid curation of structural variant candidates (Supplementary Note 3). In addition to SAM and BAM files with long, short, or paired-end reads, Ribbon can also load coordinate files from whole genome aligners such as MUMmer. Therefore, Ribbon can be used to test assembly algorithms or inspect the similarity between species. Supplementary Note 4 shows a comparison of gorilla and human genomes using Ribbon, highlighting major structural differences. In conclusion, Ribbon is a powerful interactive web tool for viewing complex genomic alignments.

Script at https://github.com/MariaNattestad/ribbon

Address of the bookmark: http://genomeribbon.com/

Graph Genome Suite

Jit — Fri, 28 Oct 2016 07:59:54 -0500

Seven Bridges is the biomedical data analysis company accelerating breakthroughs in genomics research for cancer, drug development and precision medicine. We build self-improving systems to analyze millions of genomes, including the Graph Genome Suite — the most advanced population genomics tools in the world.

Address of the bookmark: https://www.sbgenomics.com/graph/

HybPiper

Jit — Fri, 04 Nov 2016 05:02:10 -0500

HybPiper was designed for targeted sequence capture, in which DNA sequencing libraries are enriched for gene regions of interest, especially for phylogenetics. HybPiper is a suite of Python scripts that wrap and connect bioinformatics tools in order to extract target sequences from high-throughput DNA sequencing reads.

Targeted bait capture is a technique for sequencing many loci simultaneously based on bait sequences. HybPiper pipeline starts with high-throughput sequencing reads (for example from Illumina MiSeq), and assigns them to target genes using BLASTx or BWA. The reads are distributed to separate directories, where they are assembled separately using SPAdes. The main output is a FASTA file of the (in frame) CDS portion of the sample for each target region, and a separate file with the translated protein sequence.

HybPiper also includes post-processing scripts, run after the main pipeline, to also extract the intronic regions flanking each exon, investigate putative paralogs, and calculate sequencing depth. For more information, please see our wiki.

HybPiper is run separately for each sample (single or paired-end sequence reads). When HybPiper generates sequence files from the reads, it does so in a standardized directory hierarchy. Many of the post-processing scripts rely on this directory hierarchy, so do not modify it after running the initial pipeline. It is a good idea to run the pipeline for each sample from the same directory. You will end up with one directory per run of HybPiper, and some of the later scripts take advantage of this predictable directory structure.

Address of the bookmark: https://github.com/mossmatters/HybPiper

Maq: Mapping and Assembly with Quality

Jit — Tue, 22 Nov 2016 04:51:39 -0600

Maq stands for Mapping and Assembly with Quality It builds assembly by mapping short reads to reference sequences. Maq is a project hosted by SourceForge.net. The project page is available athttp://sourceforge.net/projects/maq/. Maq is previously known as mapass2.

Run Maq Now

Follow these steps to try Maq. All you need is a reference sequence file in the FASTA format.

Prepare a reference sequence (ref.fasta). Better a bacterial genome.
Download maq, maq-data and maqview at the download page.
Copy maq, maq.pl and maq_eval.pl to the $PATH or to the same directory.
Simulate diploid reference and read sequences, map reads, call variants and evaluate the results in one go:
```
maq.pl demo ref.fasta calib-30.dat
```
where calib-30.dat is contained in maq-data.

View the alignment:

cd maqdemo/easyrun;
maqindex -i -c consensus.cns all.map;
maqview -c consensus.cns all.map

Even for advanced maq users, running `maq.pl demo' is recommended. You may find something helpful.

Address of the bookmark: http://maq.sourceforge.net