BOL: Related items

Clustergrammer is a web-based tool for visualizing high-dimensional data as an interactive and shareable hierarchically clustered heatmap

BioStar — Sun, 23 Aug 2020 19:30:17 -0500

Clustergrammer is a web-based tool for visualizing high-dimensional data (e.g. a matrix) as an interactive and shareable hierarchically clustered heatmap. Clustergrammer's front end (Clustergrammer-JS) is built using D3.js and its back-end (Clustergrammer-PY) is built using Python. Clustergrammer produces highly interactive visualizations that enable intuitive exploration of high-dimensional data and has several biology-specific features (e.g. enrichment analysis, see Biology-Specific Features) to facilitate the exploration of gene-level biological data.

Address of the bookmark: https://github.com/MaayanLab/clustergrammer

LoReTTA, a user-friendly tool for assembling viral genomes from PacBio sequence data

Neel — Wed, 23 Jun 2021 07:54:53 -0500

LoReTTA (Long Read Template-Targeted Assembler), a tool designed for performing de novo assembly of long reads generated from viral genomes on the PacBio platform. LoReTTA exploits a reference genome to guide the assembly process, an approach that has been successful with short reads.

https://academic.oup.com/ve/article/7/1/veab042/6248116

Address of the bookmark: https://academic.oup.com/ve/article/7/1/veab042/6248116

GenomeQC: a quality assessment tool for genome assemblies and gene structure annotations

Neel — Thu, 19 May 2022 04:29:05 -0500

The GenomeQC web application is implemented in R/Shiny version 1.5.9 and Python 3.6 and is freely available at https://genomeqc.maizegdb.org/ under the GPL license. All source code and a containerized version of the GenomeQC pipeline is available in the GitHub repository https://github.com/HuffordLab/GenomeQC.

https://bmcgenomics.biomedcentral.com/articles/10.1186/s12864-020-6568-2

Address of the bookmark: https://github.com/HuffordLab/GenomeQC

CGView.js is a Circular Genome Viewing tool

LEGE — Wed, 27 Mar 2024 11:16:24 -0500

CGView.js is a Circular Genome Viewing tool for visualizing and interacting with small genomes. This software is an adaptation of the Java program CGView.

CGView.js is the genome viewer of Proksee, an expert system for genome assembly, annotation and visualization.

Features

Circular and linear views of genomes
Capable of drawing genomes up to 10 Mbp with 1000's of features and 100's contigs
Smooth zooming down to the sequence level
Easily generate features and plots directly form the sequence (e.g. ORFs, GC-content and GC-Skew)
Save high resolution PNG maps up to 8000x8000px
Fully documented API for interacting with CGView.js maps

Address of the bookmark: https://js.cgview.ca/

NGenomeSyn: an easy-to-use and flexible tool for publication-ready visualization of syntenic relationships across multiple genomes

LEGE — Tue, 10 Sep 2024 04:54:55 -0500

NGenomeSyn: an easy-to-use and flexible tool for publication-ready visualization of syntenic relationships across multiple genomes

NGenomeSyn [multiple (N) Genome Synteny], for publication-ready visualization of syntenic relationships of the whole genome or local region and genomic features (e.g. repeats, structural variations, genes) across multiple genomes with a high customization. NGenomeSyn provides an easy way for its users to visualize a large amount of data with a rich layout by simply adjusting options for moving, scaling, and rotation of target genomes. Moreover, NGenomeSyn could be applied on the visualization of relationships on non-genomic data with similar input formats.

https://academic.oup.com/bioinformatics/article/39/3/btad121/7072460

Address of the bookmark: https://github.com/hewm2008/NGenomeSyn

HISAT2 Index Files Download !

LEGE — Wed, 15 Sep 2021 22:17:49 -0500

Resource for downloading all the HISAT2 related files

Please cite:

Kim, D., Paggi, J.M., Park, C. et al. Graph-based genome alignment and genotyping with HISAT2 and HISAT-genotype. Nat Biotechnol 37, 907–915 (2019). https://doi.org/10.1038/s41587-019-0201-4

Address of the bookmark: http://daehwankimlab.github.io/hisat2/download/#h-sapiens

BamView: a free interactive display of read alignments in BAM data files

Neel — Fri, 09 Nov 2018 13:43:22 -0600

To run the application on UNIX from the downloaded jar file run the UNIX:

java -mx512m -jar BamView.jar

and extra command line options are given when '-h' is used:

java -jar BamView.jar -h

BAM files can be specified on the command line with the '-a' option:

java -mx512m -jar BamView.jar -a pathToFile/sorted.bam

If a BAM filename is not given on the command line BamView will prompt for a file to be entered. The BAM index file should have the same name as the BAM file but with a '.bai' suffix. Multiple BAM files can be loaded and overlaid in the viewer. To make this easier BamView will read in files that contain a list of filenames.

Address of the bookmark: http://bamview.sourceforge.net/

NCBI BLAST have added new columns to the Descriptions

Neel — Tue, 01 Dec 2020 09:56:07 -0600

NCBI BLAST have added new columns to the Descriptions Table for web BLAST output. The new columns are Scientific Name, Common Name, Taxid, and Accession Length. Common Name and Accession Length are now part of the default display. You can click 'Select columns' or 'Manage columns' to add or remove columns from the display Your preferences will be saved for your next visit to BLAST, and when you download your results, whatever columns you have displayed will be saved. See the NCBI Insights post (https://go.usa.gov/x7fPE) for more details.

How to install Perl modules manually, using CPAN command, and other quick ways

Jit — Fri, 12 Jul 2013 07:20:24 -0500

As a bioinformatics programmer, and crunchy data analyser you need to install several perl modules and dependencies. Installing Perl modules manually by resolving all the dependencies is tedious and annoying process. Some of the packages like GD is the real pain.

However, Installing Perl modules using CPAN is a better solution, as it resolves all the dependencies automatically. In this article, let us review how to install Perl modules on Linux ( which is prefereced amonst bioinformatician) using both manual and CPAN method.

When a Perl module is not installed, application will display the following error message. In this example, XML::Parser Perl module is missing.

Can't locate XML/parser.pm in @INC (@INC contains:
/usr/lib/perl5/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/5.10.0
/usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi
/usr/local/lib/perl5/site_perl/5.10.0
/usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl
/usr/lib/perl5/site_perl/5.10.0 .)

Manual Method of Perl Module Installation

Install Perl Modules Manually

This manual method is very useful when your computer or server is not connected to the Internet.

Download Perl module:
Go to CPAN Search website and search for the module that you wish to download. In this example, let us search, download and install XML::Parser Perl module. I have downloaded the XML-Parser-2.36.tar.gz to /home/download

# cd /home/download
# gzip -d XML-Parser-2.36.tar.gz
# tar xvf XML-Parser-2.36.tar
# cd XML-Parser-2.36

Build the perl module:
Build by running Makefile.PL, remember the case sensitivity, make and make test.

# perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for XML::Parser::Expat
Writing Makefile for XML::Parser
# make
# make test

Install the perl module:
Now your package is ready to install.

# make install

As a newbie it looks pretty simple, and one go. But, luckily this is a very simple one module with no dependencies. Typically, Perl modules will be dependent on several other modules. Just imagine chasing all these dependencies one-by-one, thinking ... oh ye I got it. That will be very painful and annoying task. I recommend the CPAN method of installation as shown below.

Install Perl Modules using CPAN automatically

Logically, you should must have the CPAN perl module installed in your server or computer before you can install any other Perl modules using CPAN. I know you are laughing, "to install a perl module you need another perl module" ;)

Lets verify whether CPAN is already installed:

To install Perl modules using CPAN, make sure the cpan command is working. Following are the error message when CPAN module is not installed.

# cpan
-bash: cpan: command not found

# perl -MCPAN -e shell
Can't locate CPAN.pm in @INC (@INC contains:
/usr/lib/perl5/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/5.10.0
/usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi
/usr/local/lib/perl5/site_perl/5.10.0
/usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.10.0
/usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.10.0 .).
BEGIN failed--compilation aborted.

Install the CPAN module using yum:
If CPAN in not installed in your system, you can use "yum" for the rescue. Dont worry biological data cruncher, this is true we are now dependent all these tiny magicians :).

# yum install perl-CPAN

Output of yum install perl-CPAN command:

Loaded plugins: refresh-packagekit
updates-newkey                       | 2.3 kB     00:00
primary.sqlite.bz2                   | 2.4 MB     00:00
Setting up Install Process
Parsing package install arguments

Resolving Dependencies
Transaction Summary
=============================================================================
Install      5 Package(s)
Update       0 Package(s)
Remove       0 Package(s)

Total download size: 1.0 M
Is this ok [y/N]: y
Downloading Packages:
(1/5): perl-ExtUtils-ParseXS-2.18-31.fc9.i386.rpm     | 30 kB     00:00
(2/5): perl-Test-Harness-2.64-31.fc9.i386.rpm         | 70 kB     00:00
(3/5): perl-CPAN-1.9205-31.fc9.i386.rpm               | 217 kB     00:00
(4/5): perl-ExtUtils-MakeMaker-6.36-31.fc9.i386.rpm   | 284 kB     00:00
(5/5): perl-devel-5.10.0-31.fc9.i386.rpm              | 408 kB     00:00

Installing     : perl-ExtUtils-ParseXS                             [1/5]
Installing     : perl-devel                                        [2/5]
Installing     : perl-Test-Harness                                 [3/5]
Installing     : perl-ExtUtils-MakeMaker                           [4/5]
Installing     : perl-CPAN                                         [5/5]

Installed: perl-CPAN.i386 0:1.9205-31.fc9
Dependency Installed:
perl-ExtUtils-MakeMaker.i386 0:6.36-31.fc9
perl-ExtUtils-ParseXS.i386 1:2.18-31.fc9
perl-Test-Harness.i386 0:2.64-31.fc9
perl-devel.i386 4:5.10.0-31.fc9
Complete!

Configure cpan the first time:
Once the CPAN is installed, you need to configure it by executing cpan, you should set some configuration parameters as shown below. I have shown only the important configuration parameters below. Accept all the default values by pressing enter.

Note: Make sure to execute “o conf commit” in the cpan prompt after the configuration to save the settings.

# cpan

Sorry, we have to rerun the configuration dialog for CPAN.pm due
to some missing parameters...

CPAN build and cache directory? [/root/.cpan]
Download target directory? [/root/.cpan/sources]
Directory where the build process takes place? [/root/.cpan/build]

Always commit changes to config variables to disk? [no]
Cache size for build directory (in MB)? [100]
Let the index expire after how many days? [1]

Perform cache scanning (atstart or never)? [atstart]
Cache metadata (yes/no)? [yes]
Policy on building prerequisites (follow, ask or ignore)? [ask]

Parameters for the 'perl Makefile.PL' command? []
Parameters for the 'perl Build.PL' command? []

Your ftp_proxy? []
Your http_proxy? []
Your no_proxy? []
Is it OK to try to connect to the Internet? [yes]

First, pick a nearby continent and country by typing in the number(s)
(1) Africa
(2) Asia
(3) Central America
(4) Europe
(5) North America
(6) Oceania
(7) South America
Select your continent (or several nearby continents) [] 5

(1) Bahamas
(2) Canada
(3) Mexico
(4) United States
Select your country (or several nearby countries) [] 4

(2) ftp://carroll.cac.psu.edu/pub/CPAN/
(3) ftp://cpan-du.viaverio.com/pub/CPAN/
(4) ftp://cpan-sj.viaverio.com/pub/CPAN/
(5) ftp://cpan.calvin.edu/pub/CPAN
(6) ftp://cpan.cs.utah.edu/pub/CPAN/
e.g. '1 4 5' or '7 1-4 8' [] 2-16

cpan[1]> o conf commit
commit: wrote '/usr/lib/perl5/5.10.0/CPAN/Config.pm'

cpan[2]> quit
No history written (no histfile specified).
Lockfile removed.

Install Perl Modules using CPAN

Hey smile please, now you are ready with CPAN and can download modules in one line command.

You can use one of the following method to install a Perl module using cpan:

# perl -MCPAN -e 'install Bundle::BioPerl'

(or)

# cpan
cpan shell -- CPAN exploration and modules installation (v1.9205)
ReadLine support available (maybe install Bundle::CPAN or Bundle::CPANxxl?)

cpan[1]> install "Bundle::BioPerl"

In the example above, CPAN will check for Bundle::BioPerl dependencies and automatically resolves and installs Bundle::BioPerl with all the dependent Perl modules.

Quick Ways

Oh, look at your face.. smily hmm :). This is what your are looking for, a quick and best way to install Perl modules, Bioperl. Following are the the steps to download BioPerl in your server/computer.

# sudo apt-cache search perl BioPerl

Output will be like as follows:

bioperl - Perl tools for computational molecular biology
bioperl-run - BioPerl wrappers: scripts
libbio-perl-perl - BioPerl core perl modules
libbio-perl-run-perl - BioPerl wrappers: modules
libbio-samtools-perl - Perl interface to SamTools library for DNA sequencing
libbiojava-java - Java API to biological data and applications (default version)
libbiojava3-java - Java API to biological data and applications (default version)
python-biopython-sql - Biopython support for the BioSQL database schema
libbtlib-perl - library for basic sequence manipulation

# sudo apt-get install bioperl

If it is installed then flash the following message:

Reading package lists... Done
Building dependency tree
Reading state information... Done
bioperl is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 10 not upgraded.

In it is found not installed in your server or system them install all with dependencies.

You can use the same approach to install all the modules, and packages if required.

Thanks for reading. Best of luck for your research.

Perl Maven tutorial by Gabor Szabo

Jitendra Narayan — Fri, 09 Aug 2013 05:43:10 -0500

I personally reccoment this tutorial for Perl users.

More detail http://perlmaven.com/