BOL: Related items

proovread : large-scale high-accuracy PacBio correction through iterative short read consensus

Jit — Fri, 05 Jan 2018 04:12:20 -0600

proovread : large-scale high-accuracy PacBio correction through iterative short read consensus

outperforms PacBioToCA/LSC in terms of accuracy and contiguity/sensitivity (http://dx.doi.org/10.1093/bioinformatics/btu392)
is easy to install/run/configure
supports various types of dat
- HiSeq/MiSeq (100-500bp)
- Unitigs
- 454, ...

proovread maps high coverage data to pacbio reads (bwa mem, blasr, daligner) in multiple iterations.

Address of the bookmark: https://github.com/BioInf-Wuerzburg/proovread

LoRMA: A tool for correcting sequencing errors in long reads

Abhimanyu Singh — Thu, 06 Sep 2018 16:21:01 -0500

An error correction method that uses long reads only. The method consists of two phases: first, we use an iterative alignment-free correction method based on de Bruijn graphs with increasing length of k-mers, and second, the corrected reads are further polished using long-distance dependencies that are found using multiple alignments. According to our experiments, the proposed method is the most accurate one relying on long reads only for read sets with high coverage. Furthermore, when the coverage of the read set is at least 75×, the throughput of the new method is at least 20% higher.

conda install -c atgc-montpellier lorma

Address of the bookmark: https://gite.lirmm.fr/lorma/lorma-releases/wikis/home

minialign: fast and accurate alignment tool for PacBio and Nanopore long reads

Jit — Thu, 24 May 2018 08:33:26 -0500

Minialign is a little bit fast and moderately accurate nucleotide sequence alignment tool designed for PacBio and Nanopore long reads. It is built on three key algorithms, minimizer-based index of the minimap overlapper, array-based seed chaining, and SIMD-parallel Smith-Waterman-Gotoh extension.

Address of the bookmark: https://github.com/ocxtal/minialign

rHAT: a seed-and-extension-based noisy long read alignment tool

Abhimanyu Singh — Sun, 23 Sep 2018 05:12:22 -0500

rHAT is a seed-and-extension-based noisy long read alignment tool. It is suitable for aligning 3rd generation sequencing reads which are in large read length with relatively high error rate, especially Pacbio's Single Molecule Read-time (SMRT) sequencing reads.

Address of the bookmark: https://github.com/dfguan/rHAT

Shasta long read assembler

Jit — Tue, 14 Jan 2020 06:47:07 -0600

The goal of the Shasta long read assembler is to rapidly produce accurate assembled sequence using as input DNA reads generated by Oxford Nanopore flow cells.

Computational methods used by the Shasta assembler include:

Using a run-length representation of the read sequence. This makes the assembly process more resilient to errors in homopolymer repeat counts, which are the most common type of errors in Oxford Nanopore reads.
Using in some phases of the computation a representation of the read sequence based on markers, a fixed subset of short k-mers (k ≈ 10).

More at https://chanzuckerberg.github.io/shasta/index.html

Address of the bookmark: https://github.com/chanzuckerberg/shasta

1mb long DNA with Nanopore technology

Jit — Tue, 19 Dec 2017 18:49:28 -0600

The first continuous DNA read of more than a million bases (>1Mb) has been achieved, using Oxford Nanopore sequencing technology. Congratulations to Martin Smith and collaborators! Read more: http://bit.ly/2j5TNCO

Software and Tools to detect structure variation with long reads !!

Archana Malhotra — Wed, 15 Mar 2017 14:31:09 -0500

Uncovering the connection between genetics and heritable diseases requires an approach that looks at all the variant bases and types in a genome. While a PacBio de novo assembly resolves the most novel SV variants. 8-10X PacBio coverage of single genomes or trios reveals triple the SVs detectable by short-read data.

With Single Molecule, Real-Time (SMRT) Sequencing, you can access structural variations having a broad range of sizes, types, and GC content with the ability to:

Uncover missing heritability linked to structural variation
Unambiguously identify genomic context and variant breakpoints at the sequence level to unravel the genetic etiology of disease
Resolve structural variation across the complete size spectrum with basepair resolution

Following are the SV tools, which can assist you to achieve your goal.

Sniffles: Structural variation caller using third generation sequencing

Sniffles is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Please note the current version of Sniffles requires sorted output from BWA-MEM (use -M and -x parameter) or NGM-LR with the optional SAM attributes enabled!

More at https://github.com/fritzsedlazeck/Sniffles

MultiBreak-SV: It identifies structural variants from next-generation paired end data, third-generation long read data, or data from a combination of sequencing platforms.

There are two pieces of software in this release: (1) a pre-processor that takes machineformat (.m5) BLASR files, and (2) MultiBreak-SV. For installation and usage instructions, see doc/MultiBreakSV-Manual.txt.

More at https://github.com/raphael-group/multibreak-sv

Parliament: A Structural Variation Tool. Why ask a single sv-detection approach to find every variant when you can have a parliament of tools deciding?

Publication about the algorithm and “…the first long-read characterization of structural variation in a diploid human personal genome…” (HS1011) - “Assessing structural variation in a personal genome—towards a human reference diploid genome”

More at https://sourceforge.net/projects/parliamentsv/

https://www.dnanexus.com/papers/Parliament_Info_Sheet.pdf

PBHoney: the structural variation discovery tool

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Read The Paper http://www.biomedcentral.com/1471-2105/15/180/abstract

More at https://sourceforge.net/projects/pb-jelly/

SMRT-SV: Structural variant and indel caller for PacBio reads

Structural variant (SV) and indel caller for PacBio reads based on methods from Chaisson et al. 2014.

SMRT-SV provides an official software package for tools described in Chaisson et al. 2014 and adds several key features including the following.

Unified variant calling user interface with built-in cluster compute support
Small indel calling (2-49 bp)
Improved inversion calling (screenInversions)
Quality metric for SV calls based on number of local assemblies supporting each call
Higher sensitivity for SV calls using tiled local assemblies across the entire genome instead of "signature" regions
Genotyping of SVs with Illumina paired-end reads from WGS samples

More at https://github.com/EichlerLab/pacbio_variant_caller

Oxford Nanopore Sequencing, Hybrid Error Correction, and de novo Assembly of a Eukaryotic Genome

Jit — Wed, 29 Nov 2017 05:08:53 -0600

Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available that we used for sequencing the S. cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr (https://github.com/jgurtowski/nanocorr) specifically for Oxford Nanopore reads, as existing packages were incapable of assembling the long read lengths (5-50kbp) at such high error rate (between ~5 and 40% error). With this new method we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: the contig N50 length is more than ten-times greater than an Illumina-only assembly (678kb versus 59.9kbp), and has greater than 99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

Address of the bookmark: http://schatzlab.cshl.edu/data/nanocorr/

FMLRC: a long-read error correction tool using the multi-string Burrows Wheeler Transform

Neel — Fri, 10 Aug 2018 13:29:28 -0500

FMLRC, or FM-index Long Read Corrector, is a tool for performing hybrid correction of long read sequencing using the BWT and FM-index of short-read sequencing data. Given a BWT of the short-read sequencing data, FMLRC will build an FM-index and use that as an implicit de Bruijn graph. Each long read is then corrected independently by identifying low frequency k-mers in the long read and replacing them with the closest matching high frequency k-mers in the implicit de Bruijn graph. In contrast to other de Bruijn graph based implementations, FMLRC is not restricted to a particular k-mer size and instead uses a two pass method with both a short "k-mer" and a longer "K-mer". This allows FMLRC to correct through low complexity regions that are computational difficult for short k-mers.

Address of the bookmark: https://github.com/holtjma/fmlrc

Cerulean: A hybrid assembly using high throughput short and long reads

Rahul Nayak — Tue, 05 Jun 2018 10:10:15 -0500

Cerulean extends contigs assembled using short read datasets like Illumina paired-end reads using long reads like PacBio RS long reads. Cerulean v0.1 has been implemented with bacterial genomes in mind. The method is fully described in Deshpande, V., Fung, E. D., Pham, S., & Bafna, V. (2013). Cerulean: A hybrid assembly using high throughput short and long reads. arXiv preprint arXiv:1307.7933. http://arxiv.org/abs/1307.7933

Address of the bookmark: https://sourceforge.net/projects/ceruleanassembler/