BOL: Related items

RaGOO: Fast Reference-Guided Scaffolding of Genome Assembly Contigs

BioJoker — Wed, 17 Apr 2019 19:45:22 -0500

Alonge M, Soyk S, Ramakrishnan S, Wang X, Goodwin S, Sedlazeck FJ, Lippman ZB, Schatz MC: Fast and accurate reference-guided scaffolding of draft genomes. bioRxiv 2019.

RaGOO is a tool for coalescing genome assembly contigs into pseudochromosomes via minimap2 alignments to a closely related reference genome. The focus of this tool is on practicality and therefore has the following features:

Good performance. On a MacBook Pro using Arabidopsis data, pseudochromosome construction takes less than a minute and the whole pipeline with SV calling takes ~2 minutes.
Intact ordering and orienting of contigs.
Chimeric contig correction
GFF lift-over
Structural variant calling with and integrated version of Assemblytics
Confidence scores associated with the grouping, localization, and orientation for each contig.

Address of the bookmark: https://github.com/malonge/RaGOO

The MARVEL assembler

Jit — Fri, 04 May 2018 19:18:41 -0500

MARVEL consists of a set of tools that facilitate the overlapping, patching, correction and assembly of noisy (not so noisy ones as well) long reads.

The assembly process can be summarized as follows:

overlap
patch reads
overlap (again)
scrubbing
assembly graph construction and touring
optional read correction
fasta file creation

Address of the bookmark: https://github.com/schloi/MARVEL

Nanopore adaptor !

Jit — Mon, 03 Feb 2020 00:10:29 -0600

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

The known Nanopore adapters that Porechop looks for are defined

https://github.com/rrwick/Porechop/blob/master/porechop/adapters.py

They are:

Ligation kit adapters
Rapid kit adapters
PCR kit adapters
Barcodes
Native barcoding
Rapid barcoding

Address of the bookmark: https://github.com/rrwick/Porechop/blob/master/porechop/adapters.py

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads

Jit — Wed, 07 Jun 2017 04:18:16 -0500

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads http://www.nature.com/ncomms/2016/160415/ncomms11307/full/ncomms11307.html

Features

    Mapping position agnostic to alignment parameters.
    Consistently very high sensitivity and precision across different error profiles, rates and sequencing technologies even with default parameters.
    Circular genome handling to resolve coverage drops near ends of the genome.
    E-value.
    Meaningful mapping quality.
    Various alignment strategies (semiglobal bit-vector and Gotoh, anchored).
    Overlapping of reads for de novo assembly.
    Transcriptome mapping through internal construction of a transcriptome from a given genomic reference and a GTF file.
    ...and much more.

GraphMap is also used as an overlapper in a new de novo genome assembly project called Ra (https://github.com/mariokostelac/ra-integrate).
Ra attempts to create de novo assemblies from raw nanopore and PacBio reads without requiring error correction, for which a highly sensitive overlapper is required.

Currently, development of a new spliced-alignment mode for mapping RNA-seq reads is under way.
Description of the current effort as well as how to reach the experimental implementation can be found here: doc/rnaseq.md.

Address of the bookmark: https://github.com/isovic/graphmap

MashMap: a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s)

Jit — Tue, 12 Dec 2017 17:23:31 -0600

MashMap is a fast and approximate software for mapping long reads (PacBio/ONT) or assembly to reference genome(s). It maps a query sequence against a reference region if and only if its estimated alignment identity is above a specified threshold. It does not compute the alignments explicitly, but rather estimates a k-mer based Jaccard similarity using a combination of Winnowing and MinHash. This is then converted to an estimate of sequence identity using the Mash distance. An appropriate k-mer sampling rate is automatically determined given minimum local alignment length and identity thresholds. The efficiency of the algorithm improves as both of these thresholds are increased.

Address of the bookmark: https://github.com/marbl/MashMap

GenomeMapper: Simultaneous alignment of short reads against multiple genomes

Jit — Fri, 25 May 2018 09:29:44 -0500

GenomeMapper is a short read mapping tool designed for accurate read alignments. It quickly aligns millions of reads either with ungapped or gapped alignments. It can be used to align against multiple genomes simulanteously or against a single reference. If you are unsure which one is the appropriate GenomeMapper, you might want to use the latter https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2768987/

Address of the bookmark: http://1001genomes.org/software/genomemapper.html

JBrowse: Embeddable genome browser built completely with JavaScript and HTML5

Jit — Fri, 29 Jun 2018 09:19:56 -0500

JBrowse is a fast, embeddable genome browser built completely with JavaScript and HTML5, with optional run-once data formatting tools written in Perl. Headline Features: Fast, smooth scrolling and zooming. Explore your genome with unparalleled speed. Scales easily to multi-gigabase genomes and deep-coverage sequencing. Quickly open and view data files on your computer without uploading them to any server. Supports GFF3, BED, FASTA, Wiggle, BigWig, BAM, VCF (with either .tbi or .idx index), REST, and more. BAM, BigBed, BigWig, and VCF data are displayed directly from chunks of the compressed binary files, no conversion needed. Includes an optional “faceted” track selector (see demo) suitable for large installations with thousands of tracks. Very light server resource requirements. In fact, JBrowse has no back-end server code, just tools for formatting data files to be read directly over HTTP. Serve huge datasets from a single low-cost cloud instance. Can run as a stand-alone app on OSX and Windows using the Electron platform Highly extensible plugin architecture, with a large plugin registry of existing examples here https://gmod.github.io/jbrowse-registry https://jbrowse.org/

Address of the bookmark: https://github.com/GMOD/jbrowse

FinisherSC:a repeat-aware tool for upgrading de novo assembly using long reads

Jit — Mon, 20 Aug 2018 04:08:50 -0500

Here is the command to run the tool:

python finisherSC.py destinedFolder mummerPath

If you are running on server computer and would like to use multiple threads, then the following commands can generate 20 threads to run FinisherSC.

python finisherSC.py -par 20 destinedFolder mummerPath

Sometimes, if the names of raw reads and contigs consists of special characters/formats, FinisherSC/MUMmer may not parse them correctly. In that case, you want to have a quick renaming of the names of contigs/reads in contigs.fasta or raw_reads.fasta using the following command.

    perl -pe 's/>[^\$]*$/">Seg" . ++$n ."\n"/ge' raw_reads.fasta > newRaw_reads.fasta
    cp newRaw_reads.fasta raw_reads.fasta
    perl -pe 's/>[^\$]*$/">Seg" . ++$n ."\n"/ge' contigs.fasta > newContigs.fasta
    cp newContigs.fasta contigs.fasta

Address of the bookmark: https://github.com/kakitone/finishingTool

LRCstats: a tool for evaluating long reads correction methods

Aaryan Lokwani — Wed, 22 Aug 2018 11:05:04 -0500

LRCstats is an open-source pipeline for benchmarking DNA long read correction algorithms for long reads outputted by third generation sequencing technology such as machines produced by Pacific Biosciences. The reads produced by third generation sequencing technology, as the name suggests, are longer in length than reads produced by next generation sequencing technologies, such as those produced by Illumina. However, long reads are plagued by high error rates, which can cause issues in downstream analysis. Long read correction algorithms reduce the error rate of long reads either through self-correcting methods or using accurate, short reads outputted by next generation sequencing technologies to correct long reads.

Address of the bookmark: https://github.com/cchauve/lrcstats

PANDASEQ is a program to align Illumina reads, optionally with PCR primers embedded in the sequence, and reconstruct an overlapping sequence.

BioStar — Fri, 21 Sep 2018 10:19:52 -0500

Development packages for zlib and libbz2 are needed, as well as a standard compiler environment. On Ubuntu, this can be installed via:

sudo apt-get install build-essential libtool automake zlib1g-dev libbz2-dev pkg-config

On MacOS, the Apple Developer tools and Fink (or MacPorts or Brew) must be installed, then:

sudo fink install bzip2-dev pkgconfig

Address of the bookmark: https://github.com/neufeld/pandaseq