BOL: Related items

CANU: Assembling Large Genomes with Single-Molecule Sequencing and Locality Sensitive Hashing.

Jit — Tue, 26 Apr 2016 11:38:10 -0500

Canu is a fork of the Celera Assembler designed for high-noise single-molecule sequencing (such as the PacBio RSII or Oxford Nanopore MinION). The software is currently alpha level, feel free to use and report issues encountered.

Canu is a hierachical assembly pipeline which runs in four steps:

Detect overlaps in high-noise sequences using MHAP
Generate corrected sequence consensus
Trim corrected sequences
Assemble trimmed corrected sequences

Read the documentation

New release https://github.com/marbl/canu/releases

Address of the bookmark: https://github.com/marbl/canu

ORFfinder with smart BLAST

Jit — Tue, 17 May 2016 01:43:15 -0500

ORF Finder

ORFfinder is a graphical analysis tool for finding open reading frames (ORFs). We’ve been working on a few updates, and we’d like to find out what you think about them. Read on to find out what you can do with the new ORFfinder.

Smart BLAST (https://ncbiinsights.ncbi.nlm.nih.gov/2015/07/29/smartblast/)

Select one or a group of ORFs and BLAST several databases at once, and use the newly developed SmartBLAST to verify protein names. Looking for the traditional results from BLAST? They’re there too.

BBMap/BBTools package: Multipurpose tool designed for converting reads or other nucleotide data between different formats.

Jit — Mon, 13 Jun 2016 05:47:21 -0500

Reformatis a member of the BBMap/BBTools package. It is a multipurpose tool designed for converting reads or other nucleotide data between different formats. It supports, and can inter-convert:

fastq
fasta
fasta+qual
sam
scarf (an old Illumina format)
bam (if samtools is installed)
gzip
zip
ascii-33 (sanger)
ascii-64 (old Illumina)
paired files
interleaved files

It is multithreaded and can process data at over 500 megabytes per second, and can accept streams from standard in and write to standard out, allowing it to be easily dropped into the middle of a pipeline for format conversion. Reformat autodetects formats based on file extensions and content, making it very easy to use; and the autodetection can be overridden, allowing flexibility for people who don't like to follow naming conventions, or out-of-spec fastq files with qualities values like -17 or 120.

The program has been gradually expanded, and can now perform various other functions. None of these will break pairing, if the input is paired.

Quality trimming (either or both ends)
Quality filtering
Fixed-length trimming
Generation of histograms (base composition, quality, etc)
Subsampling (to a fraction of input reads, or an exact number of reads or bases)
Changing fasta line-wrapping length
Reverse-complementing (all reads or only read 2)
Adding /1 and /2 suffix to read names
GC-content filtering
Length-filtering
Testing for corrupted interleaved files

Reformat is compatible with any platform that supports Java 1.7 or higher. It also has a bash shellscript for simpler invocation. Typical usage examples:

Reformat fastq into fasta:
reformat.sh in=x.fq out=y.fa

Interleave paired reads:
reformat.sh in1=x1.fq in2=x2.fq out=y.fq

Note - you can actually use a shortcut if paired read files have the same name with a 1 and a 2. This is equivalent to the above command:
reformat.sh in=x#.fq out=y.fq

De-interleave reads:
reformat.sh in=x.fq out1=y1.fq out2=y2.fq

Verify that interleaving appears correct, assuming Illumina namimg conventions:
reformat.sh in=x.fq vint

Convert ASCII-33 to ASCII-64:
reformat.sh in=x.fq out=y.fq qin=33 qout=64

Quality-trim paired reads to Q10 on the left and right ends and discard reads shorter than 50bp after trimming:
reformat.sh in1=x1.fq in2=x2.fq out1=y1.fq out2=y2.fq outsingle=singletons.fq qtrim=rl trimq=10 minlength=50

Subsample 10% of the first 20000 pairs in an interleaved file:
reformat.sh in=x.fq out=y.fq reads=20000 samplerate=0.1 int=t
(in this case "int=t" overrides interleaving autodetection, to ensure reads are treated as pairs)

Pipe in a gzipped sam file and pipe out fasta:
reformat.sh in=stdin.sam.gz out=stdout.fa

Reverse-complement reads:
reformat.sh in=x.fq out=y.fq rcomp

For reformatting a file with very long sequences, Reformat will need more memory; just add the additional flag "-Xmx2g". For example, to change the line-wrapping length on the human genome (which has individual sequences over 200Mbp long) to 70 characters:
reformat.sh -Xmx2g in=HG19.fa.gz out=HG19_wrapped.fa.gz fastawrap=70

For additional functions, please run the shellscript with no arguments, or just read it with a text editor. If you have any questions, please post them in this thread.

For people using a non-bash terminal, you may need to type "bash reformat.sh" instead of just "reformat.sh".
For users of Windows or other platforms that do not support bash shellscripts, replace "reformat.sh" with "java -ea -Xmx200m /path/to/bbmap/current/ jgi.ReformatReads"
for example,
java -ea -Xmx200m C:\bbmap\current\ jgi.ReformatReads in=x.fq out=y.fa

Reformat can be downloaded with BBTools here:
https://sourceforge.net/projects/bbmap/

Mauve: a system for constructing multiple genome alignments in the presence of large-scale evolutionary events such as rearrangement and inversion

Jit — Sat, 24 Dec 2016 09:20:53 -0600

Mauve is a system for constructing multiple genome alignments in the presence of large-scale evolutionary events such as rearrangement and inversion. Multiple genome alignments provide a basis for research into comparative genomics and the study of genome-wide evolutionary dynamics.

Mauve has been developed with the idea that a multiple genome aligner should require only modest computational resources. It employs algorithmic techniques that scale well in the lengths of sequences being aligned. For example, a pair of Y. pestis genomes can be aligned in under a minute, while a group of 9 divergent Enterobacterial genomes can be aligned in a few hours. However, the current algorithm’s compute time (progressiveMauve) scales cubically in the number of genomes to align, making it unsuitable for datasets containing more than 50-100 bacterial genomes.

Address of the bookmark: http://darlinglab.org/mauve/mauve.html

gbtools: Interactive Visualization of Metagenome Bins in R

Jit — Sun, 26 Mar 2017 15:41:31 -0500

We have developed gbtools, a software package that allows users to visualize metagenomic assemblies by plotting coverage (sequencing depth) and GC values of contigs, and also to annotate the plots with taxonomic information. Different sets of annotations, including taxonomic assignments from conserved marker genes or SSU rRNA genes, can be imported simultaneously; users can choose which annotations to plot. Bins can be manually defined from plots, or be imported from third-party binning tools and overlaid onto plots, such that results from different methods can be compared side-by-side. gbtools reports summary statistics of bins including marker gene completeness, and allows the user to add or subtract bins with each other.

Tool at https://github.com/kbseah/genome-bin-tools

Address of the bookmark: http://journal.frontiersin.org/article/10.3389/fmicb.2015.01451/full

HGT-Finder: A New Tool for Horizontal Gene Transfer Finding and Application to Aspergillus genomes

Jit — Wed, 17 Jan 2018 05:03:19 -0600

HGT-Finder:

(i) can be used for HGT detection in both prokaryotes and eukaryotes,

(ii) can report a statistical P value for each gene to indicate how likely it is to be horizontally transferred, and

(iii) is fully automated (requires minimal human intervention), as well as very easy to install and run.

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4626719/

CViT: Chromosome Viewing Tool

Rahul Nayak — Wed, 02 Jan 2019 04:10:09 -0600

CViT - Chromosome Viewing Tool. A collection of Perl scripts that enable quick visualizations of features on linkage groups, psuedochromosomes or cytogenetic maps. Intended for whole-genome views of data but can be used to create images of single chromosomes/linkage groups, contigs, or BACs, or even proteins -- any feature that has a location on a backbone. Handles most standard genetic/genomic coordinate systems. Reads GFF3 data and produces a PNG or SVG image.

https://www.hindawi.com/journals/ijpg/2011/373875/

Address of the bookmark: https://sourceforge.net/projects/cvit/

QuasR: Quantification and annotation of short reads in R

Neel — Fri, 13 Aug 2021 07:44:05 -0500

The QuasR package (short for Quantify and annotate short reads in R) integrates the functionality of several R packages (such as IRanges (Lawrence et al. 2013) and Rsamtools) and external software (e.g. bowtie, through the Rbowtie package, and HISAT2, through the Rhisat2 package). The package aims to cover the whole analysis workflow of typical high throughput sequencing experiments, starting from the raw sequence reads, over pre-processing and alignment, up to quantification. A single R script can contain all steps of a complete analysis, making it simple to document, reproduce or share the workflow containing all relevant details.

Address of the bookmark: https://www.bioconductor.org/packages/devel/bioc/vignettes/QuasR/inst/doc/QuasR.html

Basics of BLAST Programs !

BioStar — Fri, 26 Jul 2024 06:04:26 -0500

The Basic Local Alignment Search Tool (BLAST) is a powerful bioinformatics program used to compare an input sequence (such as DNA, RNA, or protein sequences) against a database of sequences to find regions of similarity. Developed by the National Center for Biotechnology Information (NCBI), BLAST is widely used for identifying species, finding functional and evolutionary relationships between sequences, and predicting the function of novel sequences.

Key Features of BLAST:
1. Sequence Comparison: BLAST searches for local alignments between the query sequence and sequences in a database. It identifies regions of similarity, which can help infer functional and evolutionary relationships.

2. Speed and Efficiency: BLAST uses heuristic algorithms, making it faster than exhaustive search methods, suitable for large-scale database searches.

3. Versatility: There are several versions of BLAST for different types of sequence comparisons:
- blastn: Compares a nucleotide query sequence against a nucleotide sequence database.
- blastp: Compares a protein query sequence against a protein sequence database.
- blastx: Compares a nucleotide query sequence translated in all reading frames against a protein sequence database.
- tblastn: Compares a protein query sequence against a nucleotide sequence database translated in all reading frames.
- tblastx: Compares the six-frame translations of a nucleotide query sequence against the six-frame translations of a nucleotide sequence database.

4. Scoring and E-value: BLAST results are scored based on the quality and length of the alignments. The E-value (expect value) indicates the number of alignments one can expect to find by chance, with lower E-values representing more significant matches.

5. Output Formats: BLAST provides results in various formats, including plain text, HTML, XML, and JSON, making it adaptable for different types of analyses and integrations with other tools.

Applications of BLAST:
- Genomic Research: Identifying genes, understanding genetic diversity, and mapping genome sequences.
- Protein Function Prediction: Inferring the function of unknown proteins by comparing them to known protein sequences.
- Evolutionary Studies: Exploring evolutionary relationships between organisms by comparing their genetic material.
- Medical Research: Identifying pathogens, understanding disease mechanisms, and developing treatments by comparing sequences of interest.

Overall, BLAST is an essential tool in bioinformatics, offering a reliable and efficient way to analyze and interpret biological sequence data.

TelomereHunter

Jit — Fri, 02 Feb 2018 04:23:59 -0600

TelomereHunter is a tool for estimating telomere content from human whole-genome sequencing data. It is designed to take BAM files from a tumor and a matching control sample as input. However, it is also possible to run TelomereHunter with one input file. TelomereHunter extracts and sorts telomeric reads from the input sample(s). For the estimation of telomere content, GC biases are taken into account. Finally, the results of TelomereHunter are visualized in several diagrams.

TelomereHunter is available for download at the following address: https://pypi.python.org/pypi/telomerehunter/

Address of the bookmark: http://www.dkfz.de/en/applied-bioinformatics/telomerehunter/telomerehunter.html