BOL: Related items

ALPHA: A Toolkit for Automated Local Phylogenomic Analyses

Jit — Wed, 21 Mar 2018 18:12:06 -0500

Automated Local Phylogenomic Analyses, or ALPHA, is a python-based application that provides an intuitive user interface for phylogenetic analyses and data visualization. It has four distinct modes that are useful for different types of phylogenetic analysis: RAxML, File Converter, MS Comparison, and D-statistic.

Address of the bookmark: https://github.com/chilleo/ALPHA

SvABA: Structural variation and indel detection by local assembly

Jit — Tue, 10 Mar 2020 07:52:15 -0500

SvABA is a method for detecting structural variants in sequencing data using genome-wide local assembly. Under the hood, SvABA uses a custom implementation of SGA (String Graph Assembler) by Jared Simpson, and BWA-MEM by Heng Li. Contigs are assembled for every 25kb window (with some small overlap) for every region in the genome. The default is to use only clipped, discordant, unmapped and indel reads, although this can be customized to any set of reads at the command line using VariantBam rules. These contigs are then immediately aligned to the reference with BWA-MEM and parsed to identify variants. Sequencing reads are then realigned to the contigs with BWA-MEM, and variants are scored by their read support.

Address of the bookmark: https://github.com/walaj/svaba

MITObim - mitochondrial baiting and iterative mapping

Rahul Nayak — Tue, 08 May 2018 04:15:25 -0500

This document contains instructions on how to use the MITObim pipeline described in Hahn et al. 2013. The full article can be found here. Kindly cite the article if you are using MITObim in your work. The pipeline was originally developed for Illumina data, but thanks to the versatility of the MIRA assembler, MITObim supports in principle also data from the Iontorrent, 454 and PacBio sequencing platforms.

Below you can find a few basic tutorials for how to run MITObim and I encorage you to give them a try with the testdata that comes with this Repo, just to make sure everything is running smoothly on your system. It'll only take a few minutes and will potentially safe you a lot of time down the line.

I provide further examples here as Jupyter notebooks. Get in touch if you feel like sharing your particular MITObim solution and I'd be happy to put it up here, too!

Address of the bookmark: https://github.com/chrishah/MITObim

Heatmapper: web-enabled heat mapping for all

Jit — Mon, 01 Oct 2018 08:34:41 -0500

Heatmapper is a freely available web server that allows users to interactively visualize their data in the form of heat maps through an easy-to-use graphical interface. Heatmapper is a versatile tool that allows users to easily create a wide variety of heat maps for many different data types and applications. Heatmapper allows users to generate, cluster and visualize:

1) expression-based heat maps from transcriptomic, proteomic and metabolomic experiments; 2) pairwise distance maps;

3) correlation maps;

4) image overlay heat maps;

5) latitude and longitude heat maps and

6) geopolitical (choropleth) heat maps.

Heatmapper offers a number of simple and intuitive customization options for easy adjustments to each heat map’s appearance and plotting parameters. Heatmapper also allows users to interactively explore their numeric data values by hovering their cursor over each heat map, or by using a searchable/sortable data table view.

Ref https://www.ncbi.nlm.nih.gov/pubmed/27190236

Address of the bookmark: http://www2.heatmapper.ca/

Scientists map 17,294 proteins produced in human body

Jit — Thu, 29 May 2014 01:57:55 -0500

Indian scientists missed the genomic profiling bus, but they've more than made up for it by creating the first human proteome map which is an extension of the genomic study. Till now, here is no direct equivalent for the human proteome. But recently two groups present mass spectrometry-based analysis of human tissues, body fluids and cells mapping the large majority of the human proteome.

The Indian scientists working in Bangalore, along with their American counterparts, have mapped more than 17,000 proteins in 30 organs of the human body. Just like the human genome was sequenced around the turn of the millennium, this is an equivalent mapping of the human proteome.

The researcher estimated there are around 20,500 proteins in the human body. These scientists have profiled around 17,294, which account for around 84% of the total proteins. Apart from this, the team also traced around 2,500 of 3,000 proteins that had been categorised as "missing proteins".

The work, done by group of Indian scientists, and Johns Hopkins University, published in the renowned journal Nature ( http://www.nature.com/nature/journal/v509/n7502/full/nature13302.html ). Of the 72 people who worked on the project, 46 are Indians.

Reference:

http://www.nature.com/nature/journal/v509/n7502/full/nature13302.html

http://www.proteinatlas.org/ -The antibody-based Human Protein Atlas programme

http://www.humanproteomemap.org/ -Proteogenomic analysis by identifying translated proteins from annotated pseudogenes, non-coding RNAs and untranslated regions.

https://www.proteomicsdb.org/ -Assembled protein evidence for 18,097 genes in ProteomicsDB

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads

Jit — Wed, 07 Jun 2017 04:18:16 -0500

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads http://www.nature.com/ncomms/2016/160415/ncomms11307/full/ncomms11307.html

Features

    Mapping position agnostic to alignment parameters.
    Consistently very high sensitivity and precision across different error profiles, rates and sequencing technologies even with default parameters.
    Circular genome handling to resolve coverage drops near ends of the genome.
    E-value.
    Meaningful mapping quality.
    Various alignment strategies (semiglobal bit-vector and Gotoh, anchored).
    Overlapping of reads for de novo assembly.
    Transcriptome mapping through internal construction of a transcriptome from a given genomic reference and a GTF file.
    ...and much more.

GraphMap is also used as an overlapper in a new de novo genome assembly project called Ra (https://github.com/mariokostelac/ra-integrate).
Ra attempts to create de novo assemblies from raw nanopore and PacBio reads without requiring error correction, for which a highly sensitive overlapper is required.

Currently, development of a new spliced-alignment mode for mapping RNA-seq reads is under way.
Description of the current effort as well as how to reach the experimental implementation can be found here: doc/rnaseq.md.

Address of the bookmark: https://github.com/isovic/graphmap

Run miniasm assembler on nanopore reads !

Jit — Mon, 18 Dec 2017 04:07:50 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

Find the detail of the reads repeats:

fq2fa ONT_A.fastq ONT_A.fasta

minimap2 -xava-ont ONT_A.fasta ONT_A.fasta -t10 -X > AONT.paf

awk '{if($1==$6){print}}' AONT.paf > AONTself.paf

awk '$5=="-"' AONTself.paf | awk '{print $1}'| sort|uniq > invertedrepeat.list

Generated a few palindrome and repeats plots (highlighting only repeats largest than 10, 20 and 30 kb)

minidot -f 5 -m 30000 AONTself.paf > AONTself30000.eps
sed 's/_template_pass_FAH31515//' AONTself30000.eps > AONTself30000final.eps

minidot -f 5 -m 20000 AONTself.paf > AONTself20000.eps
sed 's/_template_pass_FAH31515//' AONTself20000.eps > AONTself20000final.eps

minidot -f 5 -m 10000 AONTself.paf > AONTself10000.eps
sed 's/_template_pass_FAH31515//' AONTself10000.eps > AONTself10000final.eps

Assemble with miniasm:

miniasm -f ONT_A.fasta AONT.paf > AONT.gfa
grep '^S' AONT.gfa |awk '{print ">"$2"\n"$3}' > AONT_miniasm.fasta

minimap2 -xasm10 AONT_miniasm.fasta AONT_miniasm.fasta -t1 -X > AONT_miniasm.paf

awk '{if($1==$6){print}}' AONT_miniasm.paf > AONT_miniasm_self.paf

minidot -f 5 -m 10000 AONT_miniasm_self.paf > AONT_miniasm_self10000.eps

Njoy the assembly !

MECAT: fast mapping, error correction, and de novo assembly for single-molecule sequencing reads

Rahul Nayak — Fri, 11 May 2018 05:07:45 -0500

MECAT is an ultra-fast Mapping, Error Correction and de novo Assembly Tools for single molecula sequencing (SMRT) reads. MECAT employs novel alignment and error correction algorithms that are much more efficient than the state of art of aligners and error correction tools. MECAT can be used for effectively de novo assemblying large genomes. For example, on a 32-thread computer with 2.0 GHz CPU , MECAT takes 9.5 days to assemble a human genome based on 54x SMRT data, which is 40 times faster than the current PBcR-Mhap pipeline. MECAT performance were compared with PBcR-Mhap pipeline, FALCON and Canu(v1.3) in five real datasets. The quality of assembled contigs produced by MECAT is the same or better than that of the PBcR-Mhap pipeline and FALCON.

https://www.nature.com/articles/nmeth.4432

Address of the bookmark: https://github.com/xiaochuanle/MECAT

minialign: fast and accurate alignment tool for PacBio and Nanopore long reads

Jit — Thu, 24 May 2018 08:33:26 -0500

Minialign is a little bit fast and moderately accurate nucleotide sequence alignment tool designed for PacBio and Nanopore long reads. It is built on three key algorithms, minimizer-based index of the minimap overlapper, array-based seed chaining, and SIMD-parallel Smith-Waterman-Gotoh extension.

Address of the bookmark: https://github.com/ocxtal/minialign

EAGLER: a scaffolding tool for long reads.

Jit — Mon, 04 Jun 2018 05:26:03 -0500

EAGLER is a scaffolding tool for long reads. The scaffolder takes as input a draft genome created by any NGS assembler and a set of long reads. The long reads are used to extend the contigs present in the NGS draft and possibly join overlapping contigs. EAGLER supports both PacBio and Oxford Nanopore reads.

The tool should be compatible with most UNIX flavors and has been successfully tested on the following operating systems:

Mac OS X 10.11.1
Mac OS X 10.10.3
Ubuntu 14.04 LTS

https://bib.irb.hr/datoteka/844447.Diplomski_2015_Luka_terbi.pdf

Address of the bookmark: https://github.com/mculinovic/EAGLER