BOL: Related items

GAPPadder: A Sensitive Approach for Closing Gaps on Draft Genomes with Short Sequence Reads

Jit — Mon, 14 May 2018 05:25:48 -0500

This software is provided ``as is” without warranty of any kind. In no event shall the author be held responsible for any damage resulting from the use of this software. The program package, including source codes, executables, and this documentation, is distributed free of charge. If you use this program in a publication, please cite the following reference:
Chong Chu, Xin Li, and Yufeng Wu. "GAPPadder: A Sensitive Approach for Closing Gaps on Draft Genomes with Short Sequence Reads." bioRxiv (2017): 125534.

Address of the bookmark: https://github.com/Reedwarbler/GAPPadder

SALSA: A tool to scaffold long read assemblies with Hi-C

Jit — Fri, 15 Jun 2018 04:01:15 -0500

This code is used to scaffold your assemblies using Hi-C data. This version implements some improvements in the original SALSA algorithm. If you want to use the old version, it can be found in the old_salsa branch. To use the latest version, first run the following commands: cd SALSA make To run the code, you will need Python 2.7, BOOST libraries and Networkx(version lower than 1.2). If you consider using this tool, please cite our publication which describes the methods used for scaffolding. Ghurye, J., Pop, M., Koren, S., Bickhart, D., & Chin, C. S. (2017). Scaffolding of long read assemblies using long range contact information. BMC genomics, 18(1), 527. Link Ghurye, J., Rhie, A., Walenz, B.P., Schmitt, A., Selvaraj, S., Pop, M., Phillippy, A.M. and Koren, S., 2018. Integrating Hi-C links with assembly graphs for chromosome-scale assembly. bioRxiv, p.261149 Link For any queries, please either ask on github issue page or send an email to Jay Ghurye (jayg@cs.umd.edu).

Address of the bookmark: https://github.com/machinegun/SALSA

Phased Human Genome Assembly !

Rahul Nayak — Mon, 08 Oct 2018 09:10:54 -0500

The new publicly available assembly (PacBio HG00733) has the fewest gaps of any human genome assembly, with more than half of the genome contained in gapless sequence at least 27 Mb long. The primary contig assembly is 2.89 Gb long and consists of 865 contigs that were assembled with PacBio data generated with the company’s Sequel® System. Using the FALCON-Unzip assembler, maternal and paternal haplotypes were resolved over more than 80% of the genome. Maternal and paternal haplotype blocks were then further phased using Hi-C technology and the FALCON-Phase methoddeveloped in collaboration with Phase Genomics. The genome was then de novo scaffolded using Phase Genomics’ Proximo Hi-C platform, resulting in the first chromosome-scale diploid assembly of a single individual accomplished with only two technologies. More specific details about the assembly are included on the PacBio blog.

The data are available using NCBI accession IDs: BioProject: (PRJNA483067), assembly: [RBJD00000000] and sequence data (SRP155659).

Additional Resources

Interactive map showcasing global initiatives underway to generate reference-quality human genome assemblies for diverse populations
BioReport Podcast on the value of ethnic-specific reference genomes
Nature Reviews Genetics paper from NHGRI: Prioritizing diversity in human genomics research
Article in The Journal of Precision Medicine: “Minority Report – Ethnic Diversity and the Real Promise for Precision Medicine”
Article in Bio-IT World: “Genomic Data Standards Are a Necessity”
NHGRI Project Award: High Quality Human and Non-Human Primate Genome Assemblies

More details are available on the PacBio website:

Blog post: Data Release: Highest-Quality, Most Contiguous Individual Human Genome Assembly to Date
Blog post: For Reference-Grade Human Genome Assemblies, SMRT Sequencing Yields Optimal Results
Webinar: Assembling High-Quality Human Reference Genomes for Global Populations
FALCON-Phase press release and article preprint
PacBio research focus webpage about Human Population Genetics

Ref: https://stockguru.com/2018/10/08/pacific-biosciences-releases-highest-quality-most-contiguous-individual-human-genome-assembly-to-date/

Referee: Genome assembly quality scores

Jit — Sun, 04 Nov 2018 16:44:30 -0600

Modern genome sequencing technologies provide a succint measure of quality at each position in every read, however all of this information is lost in the assembly process. Referee summarizes the quality information from the reads that map to a site in an assembled genome to calculate a quality score for each position in the genome assembly.

We accomplish this by first calculating genotype likelihoods for every site. For a given site in a diploid genome, there are 10 possible genotypes (AA, AC, AG, AT, CC, CG, CT, GG, GT, TT). Referee takes as input the genotype likelihoods calculated for all 10 genotypes given the called reference base at each position.

Referee is a program to calculate a quality score for every position in a genome assembly. This allows for easy filtering of low quality sites for any downstream analysis.

https://github.com/gwct/referee

Address of the bookmark: https://gwct.github.io/referee/#

Genome sequence-based (sub-)species delineation.

Abhimanyu Singh — Wed, 12 Dec 2018 08:31:14 -0600

The GGDC web service reports digital DDH for a universal and accurate delineation of prokaryotic (sub-)species without inheriting the pitfalls of classic DDH, and also calculates differences in genomic G+C content.

http://ggdc.dsmz.de/ggdc_background.php#

Genome-to-Genome Distance Calculator 2.1

http://ggdc.dsmz.de/ggdc.php

Address of the bookmark: http://ggdc.dsmz.de/

Roary: the Pan Genome Pipeline

Jit — Tue, 22 Jan 2019 05:52:07 -0600

Roary is a high speed stand alone pan genome pipeline, which takes annotated assemblies in GFF3 format (produced by Prokka (Seemann, 2014)) and calculates the pan genome. Using a standard desktop PC, it can analyse datasets with thousands of samples, something which is computationally infeasible with existing methods, without compromising the quality of the results. 128 samples can be analysed in under 1 hour using 1 GB of RAM and a single processor. To perform this analysis using existing methods would take weeks and hundreds of GB of RAM. Roary is not intended for meta-genomics or for comparing extremely diverse sets of genomes.

Address of the bookmark: https://sanger-pathogens.github.io/Roary/

gEVAL: Genome Evaluation Browser

Jit — Tue, 18 Jun 2019 05:39:08 -0500

The gEVAL Browser allows the evaluation of genome assemblies through its tools and pre-computed analyses.

The strength of this browser is the ability to navigate an up to date assembly and identify problematic regions and assist in strategizing potential solutions for these issues.

This facilitates the improvement of overall assemblies to a “gold” standard for release as reference genomes

Address of the bookmark: https://geval.sanger.ac.uk/index.html

Genome Informatics Section Lab !

Sat, 25 Jan 2020 06:38:23 -0600

Our section develops and applies computational methods for the analysis of massive genomics datasets, focusing on the challenges of genome sequencing and comparative genomics. We aim to improve such foundational processes and translate emerging genomic technologies into practice.

The Genome Informatics Section is hiring! Come join our outstanding team at the NIH’s National Human Genome Research Institute and contribute to the development of new reference genomes and computational methods for DNA sequencing and analysis. Both postdoc and PhD students positions are available. More information and application instructions follow below.

More at https://genomeinformatics.github.io/

Genobuntu: Package for Next Generation Sequencing and Genome Assembly

BioStar — Mon, 18 May 2020 16:47:56 -0500

Genobuntu is a software package containing more than 70 software and packages oriented towards NGS. In its current version, Genobuntu supports pre assembly tools, genome assemblers as well as post assembly tools.

Commonly used biological software and example script files for different assembly pipelines have also been provided, where the example script files can be updated to suit one’s experimental needs. Genobuntu attempts to reduce the amount of time and energy needed to build software workstations and it can also act as a good teaching source for a class room setting.

Therefore, Genobuntu offers a well-tailored environment for both novices and experts working in the field of genome assembly.

Features

Velvet
MiB
SSAKE
EULER
VCAKE
ABySS
ALLPATHS
Celera
SHARCGS
Allpaths
IDBA
TAIPAN
Edena
SOAPdenovo
Maq
IDBA-UD
No. of Reads present in the Ref. Seq.
ART NGS Reads Simulator
HiTEC, FASTQC
Minimum Description Length
SOAPaligner
Sequencing Read Archive Toolkit

Address of the bookmark: https://sourceforge.net/projects/genobuntu/

Protocol for De novo Genome Assembly using Illumina Reads

BioStar — Sat, 16 Jan 2021 21:42:11 -0600

In this protocol, we address and describe the de novo assembly method for small to medium-sized genomes.

What is de novo genome assembly?
The method of taking a large number of short DNA sequences and placing them back together to create a reflection of the original chromosomes from which the DNA originated relates to genome assembly. No previous knowledge of the source DNA sequence length, structure or composition is inferred by De novo genome assemblies. The DNA of the target organism is split up into millions of tiny parts and read on a sequencing computer in a genome sequencing experiment. Depending on the sequencing system used, these "reads" range from 20 to 1000 nucleotide base pairs (bp) in length. Usually, length reads of 36 - 150 bp are produced for Illumina style short read sequencing. These reads can be either “single ended” as described above or “paired end.”

Why genome assembly?
In basic research into why and how they live, as well as in applied topics, identifying the DNA sequence of an organism is useful. Awareness of a DNA sequence may be useful in virtually any biological research because of the relevance of DNA to living things. For example, it may be used in medicine to classify, diagnose and eventually improve genetic disorder therapies. Similarly, pathogens study can lead to treatments for infectious diseases.

Raw NGS data
Reads can be saved as a Fasta file as text or in a FastQ file with their attributes. FastQ is the most common read file format since this is what the Illumina sequencing pipeline creates. This will henceforth be the subject of our conversation.

In a nutshell the protocol:
Get the sequence file(s) read from the sequencing machine (s).
Look at the readings - have an idea of what you have and what the standard is like.
If required, raw data cleanup/quality trimming.
Choose an adequate parameter set for assembly.
Assemble the data into scaffolds/contigs.
Examine the assembly performance and determine the efficiency of the assembly.

Read Quality Control:
Check the qualiy with fastQC.
Script
https://bioinformaticsonline.com/snippets/view/42540/install-fastqc-using-conda

Quality trimming/cleanup of read files.
This function trims adapters, barcodes and other contaminants from the reads.
Script
https://bioinformaticsonline.com/snippets/view/42542/trimmomatic-command

Genome Assembly:
The object of this portion of the protocol is to explain the method of assembling the reads trimmed by quality into draft contigs.

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o result_of_spades_assembly_all_illumina

A significant range of short-read assemblers are available. Everyone with strengths and disadvantages of their own.
Some of the assemblers available include:
Velvet
SOAP-denovo
MIRA
ALLPATHS

Next step is to assess the suitability and what to do with a draft package of contiguous details for the remainder of the study now. Few stuff you can note about the contigs you just created: They're the draft Contigs. Any mis-assemblies can occur.

Mis-assembly checking and assembly metric tools:
QUAST - Quality assessment tool for genome assembly http://bioinf.spbau.ru/quast
Mauve assembly metrics - http://code.google.com/p/ngopt/wiki/How_To_Score_Genome_Assemblies_with_Mauve
InGAP-SV - https://sites.google.com/site/nextgengenomics/ingap and http://ingap.sourceforge.net/
inGAP is also useful for finding structural variants between genomes from read mappings.

Genome finishing tools:
Semi-automated gap fillers:
Gap filler - http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/gapfiller/

IMAGE (V2) - http://sourceforge.net/apps/mediawiki/image2/index.php?title=Main_Page

Genome visualisers and editors:
Artemis - http://www.sanger.ac.uk/resources/software/artemis/
IGV - http://www.broadinstitute.org/igv/

Automated and semi automated annotation tools:
Prokka - https://github.com/tseemann/prokka
RAST - http://www.nmpdr.org/FIG/wiki/view.cgi/FIG/RapidAnnotationServer
JCVI Annotation Service - http://www.jcvi.org/cms/research/projects/annotation-service/

Frequent command use for the analysis are at:

https://bioinformaticsonline.com/blog/view/38765/list-of-tools-frequently-used-while-genome-assembly
https://bioinformaticsonline.com/pages/view/42275/frequent-parameters-for-bioinformatics-tools