See the user manual or the paper for more information about Scarpa. Click here for the supplementary material.

Address of the bookmark: http://compbio.cs.toronto.edu/hapsembler/scarpa.html

Address of the bookmark: https://github.com/AlexeyG/GRASS

• Their relative orientation is correct
• Their relative order is correct
• The gap estimate is similar to the true distance on the reference

The problem of scaffolding validation is also a challenging one. One of the main issues which hinders from an adequate scaffolding evaluation are genome repeats. The previous standard for evaluation (Hunt et al., Genome Biology, 2014) did not take into account repeats. In this evaluation framework, repeats are taken into account.

The new evaluation framework considers the optimal assignment of contigs in the output scaffolding to contigs in the reference scaffolding in the sense of the number of correct links.

https://github.com/mandricigor/repeat-aware

Address of the bookmark: https://github.com/mandricigor/repeat-aware

QuorUM is distributed as an independent software package and as a module of the MaSuRCA assembly software. Both are available under the GPL open source license at http://www.genome.umd.edu.

Address of the bookmark: http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0130821

These simple steps will help you integrate LSC into your transcriptomics analysis pipeline.

• Read the LSC_requirements for running LSC.
• Download and set-up the LSC package.
• Follow the tutorial to see how LSC works on some example data.
• Read the manual if anything is unclear.
• You're ready, Happy LSCing!

Latest publication

Kin Fai Au, Jason Underwood, Lawrence Lee and Wing Hung Wong 
Improving PacBio Long Read Accuracy by Short Read Alignment [Manuscript] 
PLoS ONE 2012. 7(10): e46679. doi:10.1371/journal.pone.0046679

Address of the bookmark: https://www.healthcare.uiowa.edu/labs/au/LSC/

https://nxrepair.readthedocs.io/en/latest/tutorial.html

nxrepair aligned_matepairs.bam assemblyfasta.fasta error_locations.csv new_fasta.fasta

Address of the bookmark: https://github.com/rebeccaroisin/nxrepair

The biggest and perhaps most fearsome of the world's big cats, the tiger, shares 95.6 percent of its DNA with humans' cute and furry companions, domestic cats.

The new research showed that big cats have genetic mutations that enabled them to be carnivores. The team also identified mutations that allow snow leopards to thrive at high altitudes.

Reference:

http://www.nbcnews.com/science/your-cat-ferocious-tigers-share-lot-95-6-percent-their-4B11182690

http://timesofindia.indiatimes.com/home/environment/flora-fauna/Gene-mapping-of-tiger-completed/articleshow/22671681.cms

Paper:

http://www.nature.com/ncomms/2013/130917/ncomms3433/full/ncomms3433.html

Again, running spades.py will show you the options:

spades.py

This produces:

SPAdes genome assembler v3.10.1

Usage: /usr/local/SPAdes-3.10.1-Linux/bin/spades.py [options] -o <output_dir>

Basic options:
-o      <output_dir>    directory to store all the resulting files (required)
--sc                    this flag is required for MDA (single-cell) data
--meta                  this flag is required for metagenomic sample data
--rna                   this flag is required for RNA-Seq data
--plasmid               runs plasmidSPAdes pipeline for plasmid detection
--iontorrent            this flag is required for IonTorrent data
--test                  runs SPAdes on toy dataset
-h/--help               prints this usage message
-v/--version            prints version

Input data:
--12    <filename>      file with interlaced forward and reverse paired-end reads
-1      <filename>      file with forward paired-end reads
-2      <filename>      file with reverse paired-end reads
-s      <filename>      file with unpaired reads
--pe<#>-12      <filename>      file with interlaced reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-1       <filename>      file with forward reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-2       <filename>      file with reverse reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-s       <filename>      file with unpaired reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-<or>    orientation of reads for paired-end library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--s<#>          <filename>      file with unpaired reads for single reads library number <#> (<#> = 1,2,..,9)
--mp<#>-12      <filename>      file with interlaced reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-1       <filename>      file with forward reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-2       <filename>      file with reverse reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-s       <filename>      file with unpaired reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-<or>    orientation of reads for mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--hqmp<#>-12    <filename>      file with interlaced reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-1     <filename>      file with forward reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-2     <filename>      file with reverse reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-s     <filename>      file with unpaired reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-<or>  orientation of reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--nxmate<#>-1   <filename>      file with forward reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--nxmate<#>-2   <filename>      file with reverse reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--sanger        <filename>      file with Sanger reads
--pacbio        <filename>      file with PacBio reads
--nanopore      <filename>      file with Nanopore reads
--tslr  <filename>      file with TSLR-contigs
--trusted-contigs       <filename>      file with trusted contigs
--untrusted-contigs     <filename>      file with untrusted contigs

Pipeline options:
--only-error-correction runs only read error correction (without assembling)
--only-assembler        runs only assembling (without read error correction)
--careful               tries to reduce number of mismatches and short indels
--continue              continue run from the last available check-point
--restart-from  <cp>    restart run with updated options and from the specified check-point ('ec', 'as', 'k<int>', 'mc')
--disable-gzip-output   forces error correction not to compress the corrected reads
--disable-rr            disables repeat resolution stage of assembling

Advanced options:
--dataset       <filename>      file with dataset description in YAML format
-t/--threads    <int>           number of threads
                                [default: 16]
-m/--memory     <int>           RAM limit for SPAdes in Gb (terminates if exceeded)
                                [default: 250]
--tmp-dir       <dirname>       directory for temporary files
                                [default: <output_dir>/tmp]
-k              <int,int,...>   comma-separated list of k-mer sizes (must be odd and
                                less than 128) [default: 'auto']
--cov-cutoff    <float>         coverage cutoff value (a positive float number, or 'auto', or 'off') [default: 'off']
--phred-offset  <33 or 64>      PHRED quality offset in the input reads (33 or 64)
                                [default: auto-detect]

As you can see this is also a “pipeline” of tools that can be switched on or off. SPAdes takes quite a long time, so for the purposes of this practical, something like this may suffice:

spades.py -t 4 \
          -m 32 \
          -k 31,51,71 \
          --only-assembler \
          -1 miseq.1.fastq -2 miseq.2.fastq \
          --nanopore minion.fastq \
          -o hybrid_assembly

In turn, these parameters mean

• use 4 threads
• max memory is 32Gb
• use 3 kmer values to build the de bruijn graph(s) - 31, 51 and 71
• only run the assembler, not the correction algorithm (for speed)
• read 1 and read 2 of the MiSeq data
• the nanopore data
• put the output in folder “hybrid_assembly”

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope

Prokka – Standalone command line tool, takes just a few minutes per genome. This is the best way to get good quality annotation in a flash, which is particularly useful if you have loads of genomes or need to annotate a pangenome or metagenome. Note however that the quality of functional information is not as good as RAST, and you will need several extra steps if you want to do functional profiling and pathway analysis of your genome(s)… which is in-built in RAST.

NCBI Prokaryotic Genome Annotation Pipeline is designed to annotate bacterial and archaeal genomes (chromosomes and plasmids).

Genome annotation is a multi-level process that includes prediction of protein-coding genes, as well as other functional genome units such as structural RNAs, tRNAs, small RNAs, pseudogenes, control regions, direct and inverted repeats, insertion sequences, transposons and other mobile elements.

PGAP: NCBI has developed an automatic prokaryotic genome annotation pipeline that combines ab initio gene prediction algorithms with homology based methods. The first version of NCBI Prokaryotic Genome Automatic Annotation Pipeline (PGAAP; see Pubmed Article) developed in 2005 has been replaced with an upgraded version that is capable of processing a larger data volume.  NCBI's annotation pipeline depends on several internal databases and is not currently available for download or use outside of the NCBI environment.

BEACON (automated tool for Bacterial GEnome Annotation ComparisON), a fast tool for an automated and a systematic comparison of different annotations of single genomes. The extended annotation assigns putative functions to many genes with unknown functions. BEACON is available under GNU General Public License version 3.0 and is accessible at: http://www.cbrc.kaust.edu.sa/BEACON/.

BlastKOLA: Assigns K numbers to the user's sequence data by BLAST searches, respectively, against a nonredundant set of KEGG GENES. KOALA (KEGG Orthology And Links Annotation) is KEGG's internal annotation tool for K number assignment of KEGG GENES using SSEARCH computation. Annotate Sequence in KEGG Mapper and Pathogen Checker in KEGG Pathogen are special interfaces to this server and can be executed in an interactive mode. BlastKOALA is suitable for annotating fully sequenced genomes.

PAGIT: Provides a toolkit for improving the quality of genome assemblies created via an assembly software. PAGIT compiled four tools: (i) ABACAS which classifies and orientates contigs and estimates the sizes of gaps between them; (ii) IMAGE uses paired-end reads to extend contigs and close gaps within the scaffolds; (iii) ICORN for identifying and correcting small errors in consensus sequences and; (iv) RATT for help annotation. The software was mainly created to analyze parasite genomes of up to about 300 Mb.

MAKER: A portable and easily configurable genome annotation pipeline. MAKER allows smaller eukaryotic and prokaryotic genome projects to independently annotate their genomes and to create genome databases. It identifies repeats, aligns ESTs and proteins to a genome, produces ab-initio gene predictions and automatically synthesizes these data into gene annotations having evidence-based quality values. MAKER's inputs are minimal and its ouputs can be directly loaded into a Generic Model Organism Database (GMOD). They can also be viewed in the Apollo genome browser; this feature of MAKER provides an easy means to annotate, view and edit individual contigs and BACs without the overhead of a database. MAKER is available for download and can be tested online via the MAKER Web Annotation Service (MWAS).

MyPro is a software pipeline for high-quality prokaryotic genome assembly and annotation. It was validated on 18 oral streptococcal strains to produce submission-ready, annotated draft genomes. MyPro installed as a virtual machine and supported by updated databases will enable biologists to perform quality prokaryotic genome assembly and annotation with ease.