BOL: Related items

Scalpel

Shruti Paniwala — Wed, 20 Aug 2014 02:07:58 -0500

A team from Cold Spring Harbor Laboratory has released an algorithm, called Scalpel, for finding insertions and deletions in next generation sequencing data sets. Scalpel, which is open source and available for download on SourceForge, outperformed the popular tools GATK HaplotypeCaller and SOAPindel in test runs on both simulated and real whole human exomes.

Like other indel callers, Scalpel works by performing de novo assembly of regions of interest, so that misalignment to the reference genome cannot obscure the presence of an insertion or deletion. Scalpel's innovation is to repeatedly check its assembly before comparing to the reference genome, to account for simple sequence repeats that are a regular source of error in indel calling. When Scalpel assembles an exon, it collects reads that map to that exon (including partial matches), splits them into k-mers, and creates a de Bruijn graph to span the exon; however, if it detects repeats in the map, it iteratively increases the size of the k-mers by one base until the repeats are eliminated. This ensures that the final assembly of the exon is highly accurate while minimizing compute time.

The Cold Spring Harbor team's validation of Scalpel, published over the weekend in Nature Methods, compares Scalpel's performance on a live whole exome against HaplotypeCaller and SOAPindel. The donor is an individual with serious neurological disorders, which may be linked to a high incidence of indels. One thousand indels from this individual's exome, called by one or more of the informatics pipelines, were selected for focused resequencing. This resequencing revealed a 77% true positive rate for Scalpel calls, dramatically better than the rates for either of the competing tools; Scalpel performed especially well with indels longer than five base pairs, a traditional weak point for indel callers.

Finally, the authors demonstrate Scalpel's use on a large set of genetic data from nearly 600 families who donated samples to the Simons Simplex Collection, a project of the Simons Foundation Autism Research Initiative. Scalpel found a very high enrichment for indels in children affected by autism, compared with their unaffected siblings, a pattern that persisted even after excluding common variants.

Picard

Neel — Fri, 29 Apr 2016 08:21:54 -0500

Picard is a set of command line tools for manipulating high-throughput sequencing (HTS) data and formats such as SAM/BAM/CRAM and VCF. These file formats are defined in the Hts-specs repository. See especially the SAM specification and the VCF specification.

Note that the information on this page is targeted at end-users. For developers, the source code, building instructions and implementation/development resources are available on GitHub.

The Picard toolkit is open-source under the MIT license and free for all uses.

Enjoy!

Address of the bookmark: http://broadinstitute.github.io/picard/

ORFfinder with smart BLAST

Jit — Tue, 17 May 2016 01:43:15 -0500

ORF Finder

ORFfinder is a graphical analysis tool for finding open reading frames (ORFs). We’ve been working on a few updates, and we’d like to find out what you think about them. Read on to find out what you can do with the new ORFfinder.

Smart BLAST (https://ncbiinsights.ncbi.nlm.nih.gov/2015/07/29/smartblast/)

Select one or a group of ORFs and BLAST several databases at once, and use the newly developed SmartBLAST to verify protein names. Looking for the traditional results from BLAST? They’re there too.

BBMap/BBTools package: Multipurpose tool designed for converting reads or other nucleotide data between different formats.

Jit — Mon, 13 Jun 2016 05:47:21 -0500

Reformatis a member of the BBMap/BBTools package. It is a multipurpose tool designed for converting reads or other nucleotide data between different formats. It supports, and can inter-convert:

fastq
fasta
fasta+qual
sam
scarf (an old Illumina format)
bam (if samtools is installed)
gzip
zip
ascii-33 (sanger)
ascii-64 (old Illumina)
paired files
interleaved files

It is multithreaded and can process data at over 500 megabytes per second, and can accept streams from standard in and write to standard out, allowing it to be easily dropped into the middle of a pipeline for format conversion. Reformat autodetects formats based on file extensions and content, making it very easy to use; and the autodetection can be overridden, allowing flexibility for people who don't like to follow naming conventions, or out-of-spec fastq files with qualities values like -17 or 120.

The program has been gradually expanded, and can now perform various other functions. None of these will break pairing, if the input is paired.

Quality trimming (either or both ends)
Quality filtering
Fixed-length trimming
Generation of histograms (base composition, quality, etc)
Subsampling (to a fraction of input reads, or an exact number of reads or bases)
Changing fasta line-wrapping length
Reverse-complementing (all reads or only read 2)
Adding /1 and /2 suffix to read names
GC-content filtering
Length-filtering
Testing for corrupted interleaved files

Reformat is compatible with any platform that supports Java 1.7 or higher. It also has a bash shellscript for simpler invocation. Typical usage examples:

Reformat fastq into fasta:
reformat.sh in=x.fq out=y.fa

Interleave paired reads:
reformat.sh in1=x1.fq in2=x2.fq out=y.fq

Note - you can actually use a shortcut if paired read files have the same name with a 1 and a 2. This is equivalent to the above command:
reformat.sh in=x#.fq out=y.fq

De-interleave reads:
reformat.sh in=x.fq out1=y1.fq out2=y2.fq

Verify that interleaving appears correct, assuming Illumina namimg conventions:
reformat.sh in=x.fq vint

Convert ASCII-33 to ASCII-64:
reformat.sh in=x.fq out=y.fq qin=33 qout=64

Quality-trim paired reads to Q10 on the left and right ends and discard reads shorter than 50bp after trimming:
reformat.sh in1=x1.fq in2=x2.fq out1=y1.fq out2=y2.fq outsingle=singletons.fq qtrim=rl trimq=10 minlength=50

Subsample 10% of the first 20000 pairs in an interleaved file:
reformat.sh in=x.fq out=y.fq reads=20000 samplerate=0.1 int=t
(in this case "int=t" overrides interleaving autodetection, to ensure reads are treated as pairs)

Pipe in a gzipped sam file and pipe out fasta:
reformat.sh in=stdin.sam.gz out=stdout.fa

Reverse-complement reads:
reformat.sh in=x.fq out=y.fq rcomp

For reformatting a file with very long sequences, Reformat will need more memory; just add the additional flag "-Xmx2g". For example, to change the line-wrapping length on the human genome (which has individual sequences over 200Mbp long) to 70 characters:
reformat.sh -Xmx2g in=HG19.fa.gz out=HG19_wrapped.fa.gz fastawrap=70

For additional functions, please run the shellscript with no arguments, or just read it with a text editor. If you have any questions, please post them in this thread.

For people using a non-bash terminal, you may need to type "bash reformat.sh" instead of just "reformat.sh".
For users of Windows or other platforms that do not support bash shellscripts, replace "reformat.sh" with "java -ea -Xmx200m /path/to/bbmap/current/ jgi.ReformatReads"
for example,
java -ea -Xmx200m C:\bbmap\current\ jgi.ReformatReads in=x.fq out=y.fa

Reformat can be downloaded with BBTools here:
https://sourceforge.net/projects/bbmap/

Mauve: a system for constructing multiple genome alignments in the presence of large-scale evolutionary events such as rearrangement and inversion

Jit — Sat, 24 Dec 2016 09:20:53 -0600

Mauve is a system for constructing multiple genome alignments in the presence of large-scale evolutionary events such as rearrangement and inversion. Multiple genome alignments provide a basis for research into comparative genomics and the study of genome-wide evolutionary dynamics.

Mauve has been developed with the idea that a multiple genome aligner should require only modest computational resources. It employs algorithmic techniques that scale well in the lengths of sequences being aligned. For example, a pair of Y. pestis genomes can be aligned in under a minute, while a group of 9 divergent Enterobacterial genomes can be aligned in a few hours. However, the current algorithm’s compute time (progressiveMauve) scales cubically in the number of genomes to align, making it unsuitable for datasets containing more than 50-100 bacterial genomes.

Address of the bookmark: http://darlinglab.org/mauve/mauve.html

SVfinder: Tool for detecting genomic rearrangement form DNA-seq data

Robert M Willioms — Thu, 14 Dec 2017 15:51:40 -0600

SVfinder provides genome-wide detection of structural variants from next generation paired-end sequencing reads.

Address of the bookmark: https://github.com/cauyrd/SVfinder

lordFAST: sensitive and Fast Alignment Search Tool for LOng noisy Read sequencing Data

BioJoker — Tue, 27 Nov 2018 04:43:57 -0600

lordFAST is a sensitive tool for mapping long reads with high error rates. lordFAST is specially designed for aligning reads from PacBio sequencing technology but provides the user the ability to change alignment parameters depending on the reads and application.

lordFAST, a novel long-read mapper that is specifically designed to align reads generated by PacBio and potentially other SMS technologies to a reference. lordFAST not only has higher sensitivity than the available alternatives, it is also among the fastest and has a very low memory footprint.

Address of the bookmark: https://github.com/vpc-ccg/lordfast

G-NEST: The Gene NEighborhood Scoring Tool

Neel — Fri, 25 Sep 2020 20:09:18 -0500

The Gene NEighborhood Scoring Tool (G-NEST) combines genomic location, gene expression, and evolutionary sequence conservation data to score putative gene neighborhoods across all window sizes. Primary author of final code = William F. Martin. Example data files are in the separate repository.

Address of the bookmark: https://github.com/dglemay/G-NEST

Basics of BLAST Programs !

BioStar — Fri, 26 Jul 2024 06:04:26 -0500

The Basic Local Alignment Search Tool (BLAST) is a powerful bioinformatics program used to compare an input sequence (such as DNA, RNA, or protein sequences) against a database of sequences to find regions of similarity. Developed by the National Center for Biotechnology Information (NCBI), BLAST is widely used for identifying species, finding functional and evolutionary relationships between sequences, and predicting the function of novel sequences.

Key Features of BLAST:
1. Sequence Comparison: BLAST searches for local alignments between the query sequence and sequences in a database. It identifies regions of similarity, which can help infer functional and evolutionary relationships.

2. Speed and Efficiency: BLAST uses heuristic algorithms, making it faster than exhaustive search methods, suitable for large-scale database searches.

3. Versatility: There are several versions of BLAST for different types of sequence comparisons:
- blastn: Compares a nucleotide query sequence against a nucleotide sequence database.
- blastp: Compares a protein query sequence against a protein sequence database.
- blastx: Compares a nucleotide query sequence translated in all reading frames against a protein sequence database.
- tblastn: Compares a protein query sequence against a nucleotide sequence database translated in all reading frames.
- tblastx: Compares the six-frame translations of a nucleotide query sequence against the six-frame translations of a nucleotide sequence database.

4. Scoring and E-value: BLAST results are scored based on the quality and length of the alignments. The E-value (expect value) indicates the number of alignments one can expect to find by chance, with lower E-values representing more significant matches.

5. Output Formats: BLAST provides results in various formats, including plain text, HTML, XML, and JSON, making it adaptable for different types of analyses and integrations with other tools.

Applications of BLAST:
- Genomic Research: Identifying genes, understanding genetic diversity, and mapping genome sequences.
- Protein Function Prediction: Inferring the function of unknown proteins by comparing them to known protein sequences.
- Evolutionary Studies: Exploring evolutionary relationships between organisms by comparing their genetic material.
- Medical Research: Identifying pathogens, understanding disease mechanisms, and developing treatments by comparing sequences of interest.

Overall, BLAST is an essential tool in bioinformatics, offering a reliable and efficient way to analyze and interpret biological sequence data.

EXCAVATOR2tool

Bulbul — Wed, 30 Nov 2016 04:09:19 -0600

EXCAVATOR2 is a collection of bash, R and Fortran scripts and codes that analyses Whole Exome Sequencing (WES) data to identify CNVs. EXCAVATOR2 enhances the identification of all genomic CNVs, both overlapping and non-overlapping targeted exons by integrating the analysis of In-targets and Off- targets reads. Specifically, it improves the precision of calling CNVs overlapping targeted exons from WES data and enlarges the spectrum of detectable CNVs to off-target events.
EXCAVATOR2 can be effectively employed for the identification of CNVs in small as well as large-scale re-sequencing population and cancer studies. Lastly, it’s of particular interest that all WES experiments can be re-analysed using our method with the beneficial effect to identify novelCNVs in extra-exonic regions by having the full-genome CN profile.

Address of the bookmark: https://sourceforge.net/projects/excavator2tool/