BOL: Related items

NCBI to assist in Virus Hunting Data Science Hackathon

BioStar — Thu, 15 Nov 2018 12:55:01 -0600

NCBI Hackathon are pleased to announce the second installment of the SoCal Bioinformatics Hackathon. From January 9-11, 2019, the NCBI will help run a bioinformatics hackathon in Southern California hosted by the Computational Sciences Research Center at San Diego State University!

NCBI Hackathon specifically looking for folks who have experience in computational virus hunting or adjacent fields to identify known, taxonomically-definable and novel viruses from a few hundred thousand metagenomic datasets that we’ll put on cloud infrastructure. This event is for researchers, including students and postdocs, who are already engaged in the use of bioinformatics data or in the development of pipelines for virological analyses from high-throughput experiments. If this describes you, please apply! The event is open to anyone selected for the hackathon and willing to travel to SDSU (see below).

https://ncbiinsights.ncbi.nlm.nih.gov/2018/11/09/ncbi-sdsu-virus-hunting-data-science-hackathon-january-2019/

De novo Genome Assembly for Illumina Data

Rahul Nayak — Mon, 20 Jan 2020 05:13:29 -0600

Written and maintained by Simon Gladman - Melbourne Bioinformatics (formerly VLSCI)

Protocol Overview / Introduction

In this protocol we discuss and outline the process of de novo assembly for small to medium sized genomes.

https://www.melbournebioinformatics.org.au/tutorials/tutorials/assembly/assembly-protocol/

Address of the bookmark: https://www.melbournebioinformatics.org.au/tutorials/tutorials/assembly/assembly-protocol/

BioJupies: Automatically Generates RNA-seq Data Analysis Notebooks

Rahul Nayak — Sun, 20 Dec 2020 11:43:45 -0600

With BioJupies you can produce in seconds a customized, reusable, and interactive report from your own raw or processed RNA-seq data through a simple user interface

BioJupies now supports user accounts! Sign in from the top right corner of the page for access to unlimited private notebooks, RNA-seq datasets and alignment jobs.

Address of the bookmark: https://amp.pharm.mssm.edu/biojupies/

Fundamentals of Data Visualization by Claus O. Wilke

Abhi — Sat, 08 Jun 2024 16:07:19 -0500

The book is meant as a guide to making visualizations that accurately reflect the data, tell a story, and look professional. It has grown out of my experience of working with students and postdocs in my laboratory on thousands of data visualizations. Over the years, I have noticed that the same issues arise over and over. I have attempted to collect my accumulated knowledge from these interactions in the form of this book.

The entire book is written in R Markdown, using RStudio as my text editor and the bookdown package to turn a collection of markdown documents into a coherent whole. The book’s source code is hosted on GitHub, at https://github.com/clauswilke/dataviz.

Address of the bookmark: https://clauswilke.com/dataviz/

LoRDEC: a hybrid error correction program for long, PacBio reads

Jit — Mon, 10 Apr 2017 04:16:09 -0500

LoRDEC is a program to correct sequencing errors in long reads from 3rd generation sequencing with high error rate, and is especially intended for PacBio reads. It uses a hybrid strategy, meaning that it uses two sets of reads: the reference read set, whose error rate is assumed to be small, and the PacBio read set, which is then corrected using the reference set. Typically, the reference set contains Illumina reads.

Usually, errors in PacBio reads include many insertions and deletions, and comparatively less substitutions. LoRDEC can correct errors of all these types.
After correction, a larger portion of the sequence of PacBio reads is usable for detection of region of similarity with other sequences, for aligning them to the contigs of an assembly, etc.

Why is LoRDEC different?

It is efficient and can process large read data sets, included from eukaryotic or vertebrate species, on a usual computing server, and even works on desktop/laptop computers.
It adopts a novel graph based approach: it builds a succinct De Bruijn Graph (DBG) representing the short reads, and seeks a corrective sequence for each erroneous region of a long read by traversing chosen paths in the graph.

Address of the bookmark: http://www.atgc-montpellier.fr/lordec/

Jabba: Hybrid Error Correction for Long Sequencing Reads

Jit — Fri, 05 Jan 2018 03:58:14 -0600

Jabba is a hybrid error correction tool to correct third generation (PacBio / ONT) sequencing data, using second generation (Illumina) data.

Input

Jabba takes as input a concatenated de Bruijn graph and a set of sequences:

the de Bruijn graph should appear in fasta format with 1 entry per node, the meta information should be in the format:
>NODE
the set of sequences should be in fasta or fastq format. These sequences will be corrected (e.g. PacBio reads). The corrections will be written to a file Jabba fasta.
The output is a file in fasta format with corrections of the long reads, and additionally a file in the input format containing uncorrected reads.

https://github.com/biointec/jabba/wiki

https://almob.biomedcentral.com/articles/10.1186/s13015-016-0075-7

Address of the bookmark: https://github.com/biointec/jabba

HALC: High throughput algorithm for long read error correction

Jit — Fri, 08 Jun 2018 10:47:41 -0500

HALC, a high throughput algorithm for long read error correction. HALC aligns the long reads to short read contigs from the same species with a relatively low identity requirement so that a long read region can be aligned to at least one contig region, including its true genome region’s repeats in the contigs sufficiently similar to it (similar repeat based alignment approach) HALC was able to obtain 6.7-41.1% higher throughput than the existing algorithms while maintaining comparable accuracy. The HALC corrected long reads can thus result in 11.4-60.7% longer assembled contigs than the existing algorithms.

Address of the bookmark: https://github.com/lanl001/halc

Hercules: a profile HMM-based hybrid error correction algorithm for long reads

Jit — Mon, 20 Aug 2018 14:14:11 -0500

Choosing whether to use second or third generation sequencing platforms can lead to trade-offs between accuracy and read length. Several studies require long and accurate reads including de novo assembly, fusion and structural variation detection. In such cases researchers often combine both technologies and the more erroneous long reads are corrected using the short reads. Current approaches rely on various graph based alignment techniques and do not take the error profile of the underlying technology into account. Memory- and time- efficient machine learning algorithms that address these shortcomings have the potential to achieve better and more accurate integration of these two technologies. Results: We designed and developed Hercules, the first machine learning-based long read error correction algorithm. The algorithm models every long read as a profile Hidden Markov Model with respect to the underlying platformtextquoterights error profile. The algorithm learns a posterior transition/emission probability distribution for each long read and uses this to correct errors in these reads. Using datasets from two DNA-seq BAC clones (CH17-157L1 and CH17-227A2), and human brain cerebellum polyA RNA-seq, we show that Hercules-corrected reads have the highest mapping rate among all competing algorithms and highest accuracy when most of the basepairs of a long read are covered with short reads. Availability:

Hercules source code is available at https://github.com/BilkentCompGen/Hercules

Address of the bookmark: https://github.com/BilkentCompGen/Hercules

Rcorrector: efficient and accurate error correction for Illumina RNA-seq reads

BioStar — Tue, 04 Feb 2020 23:23:16 -0600

Rcorrector has an accuracy higher than or comparable to existing methods, including the only other method (SEECER) designed for RNA-seq reads, and is more time and memory efficient. With a 5 GB memory footprint for 100 million reads, it can be run on virtually any desktop or server. The software is available free of charge under the GNU General Public License from https://github.com/mourisl/Rcorrector/.

Usage: perl run_rcorrector.pl [OPTIONS]
OPTIONS:
	Required
	-s seq_files: comma separated files for single-end data sets
	-1 seq_files_left: comma separated files for the first mate in the paried-end data sets
	-2 seq_files_right: comma separated files for the second mate in the paired-end data sets
	-i seq_files_interleaved: comma sperated files for interleaved paired-end data sets
	Optional
	-k INT: kmer_length (<=32, default: 23)
	-od STRING: output_file_directory (default: ./)
	-t INT: number of threads to use (default: 1)
	-trim : allow trimming (default: false)
	-maxcorK INT: the maximum number of correction within k-bp window (default: 4)
	-wk FLOAT: the proportion of kmers that are used to estimate weak kmer count threshold, lower for more divergent genome (default: 0.95)
	-ek INT: expected number of kmers; does not affect the correctness of program but affects the memory usage (default: 100000000)
	-stdout: output the corrected reads to stdout (default: not used)
	-verbose: output some correction information to stdout (default: not used)
	-stage INT: start from which stage (default: 0)
		0-start from begining(storing kmers in bloom filter) ;
		1-start from count kmers showed up in bloom filter;
		2-start from dumping kmer counts into a jf_dump file;
		3-start from error correction.

Address of the bookmark: https://github.com/mourisl/Rcorrector/

CANU: Assembling Large Genomes with Single-Molecule Sequencing and Locality Sensitive Hashing.

Jit — Tue, 26 Apr 2016 11:38:10 -0500

Canu is a fork of the Celera Assembler designed for high-noise single-molecule sequencing (such as the PacBio RSII or Oxford Nanopore MinION). The software is currently alpha level, feel free to use and report issues encountered.

Canu is a hierachical assembly pipeline which runs in four steps:

Detect overlaps in high-noise sequences using MHAP
Generate corrected sequence consensus
Trim corrected sequences
Assemble trimmed corrected sequences

Read the documentation

New release https://github.com/marbl/canu/releases

Address of the bookmark: https://github.com/marbl/canu