Metagenomic simulators are a way of dealing with this issue; they produce artificial sequencing datasets in which both the composition of the microorganisms and the expected results are known. Researchers can then test a pipeline on such a controlled dataset and see precisely how well it functions. However, as metagenomic studies have become larger, more diverse, and more complex, simply generating artificial reads is no longer sufficient. The simulators now have to replicate community variation, sequencing errors, different sequencing platforms, massive data volumes, and even laboratory-based biases.

MIDASim (2024) was designed with a particular emphasis on microbial community dynamics. Unlike previous tools which regarded each simulated sample as individual, MIDASim is able to efficiently generate realistic multi-sample microbiome datasets, covering the cases where changes over time are being tracked. This feature is particularly useful when investigating how microbial communities vary between people, different experimental setups, or at various times. By overcoming the computational limitations of earlier simulation methods, MIDASim has made it easier to carry out large and complex microbiome simulation studies.

A major challenge is scale. Since modern metagenomic projects can involve millions or even billions of sequencing reads, generating such large synthetic datasets can become a significant computational problem. In order to tackle this issue, Izzy (2025) was developed. As a high-throughput metagenomic read simulator, Izzy is designed with speed in mind while still reproducing the typical patterns of sequencing errors. The people who developed it stated that it can be as much as 60 times faster than earlier tools, which makes large-scale simulations far more practical. Now, researchers can begin to ask not how long a simulation will take but rather what size dataset they want to test.

At the same time, the sequencing technology became more diverse. Researchers were not any longer restricted to using Illumina short reads since Oxford Nanopore and PacBio long-read sequencing also became important in the field of metagenomic research. In order to address these new requirements, MeSS (Metagenomic Sequence Simulator, 2025) was developed. The programme is based on a Snakemake framework and is therefore compatible with the Illumina, Oxford Nanopore and PacBio platforms. MeSS has also been designed to operate efficiently and to use less memory than earlier tools; it provides ready-made templates for the microbiomes of different sites in the human body, thus giving researchers a simple means of beginning to generate realistic simulated communities.

The simulation problem became even more specialized. Suppose that sequencing is not based on uniform sampling of DNA? In the case of targeted sequencing and hybridization-capture experiments, particular sequences are deliberately enriched, and the probability of capturing a target depends on both the probe and the target sequence. A standard model based on uniform sampling might fail to take into account this important feature of real experiments. That is why RAmpSim has been designed specifically to handle simulations for capture-based and targeted sequencing. Instead of depending solely on the assumption of uniform sampling, it includes a thermodynamic nearest-neighbor energy model to represent probe–target interactions and sequence-dependent enrichment. As a result, it is especially suitable for applications such as hybridization capture in metagenomics, where the efficiency of recovering a sequence can depend strongly on how it relates to the capture probes. RAmpSim thus reflects a wider trend towards simulations that aim not only to reproduce sequencing output but also key aspects of the experimental process itself.

MIDASim, Izzy, MeSS and RAmpSim all demonstrate how fast metagenomic simulation is evolving. MIDASim is able to deal with realistic variation within a large number of and changing microbial communities. Izzy overcomes the problem of generating very large datasets. MeSS provides support for a number of sequencing technologies in an efficient and repeatable manner. RAmpSim increases the experimental realism for capture-based sequencing. Although each of these tools addresses a separate issue, they all contribute to advancing the field.

Modern metagenomic simulation therefore aims not only at producing artificial FASTQ files. Researchers nowadays desire simulated datasets that reflect community changes, incorporate the characteristics of the sequencing platform, include real error patterns, take into account computational scale, and account for experimental biases. As metagenomic workflows become more advanced, the simulators have to keep up with this development. The tools are now going beyond that of simple data generators; they produce controlled versions of complex metagenomic experiments and thus provide researchers with something that ordinary sequencing data seldom does: a dataset in which the answer is known before any analysis takes place.

 All the nodes in the tree are clickable. This displays various information and options:

• The species name (and the associated common name if there is one)
• The rank (kingdom, family, class, species...)
• Ability to go to the corresponding node/species on NCBI web site (displayed in a new window)
• Possibility to download the corresponding subtree in newick extended format
• Possibilty to get the whole lineage from the current node/tip to the root of the tree.

Address of the bookmark: http://lifemap-ncbi.univ-lyon1.fr/

Awards of $5 million to four grantees have been made in fiscal year 2013 under the Genomic Sequencing and Newborn Screening Disorders research program. The program will be funded at $25 million over five years, as funds are made available.

"Hundreds of US babies will be pioneers in genomic medicine through a US$25-million programme to sequence their genomes soon after they are born."

Source:

http://blogs.nature.com/news/2013/09/scientists-to-sequence-hundreds-of-newborns-genomes.html

http://www.genome.gov/27554919

https://gold.jgi.doe.gov/

Address of the bookmark: https://gold.jgi.doe.gov/

Again, running spades.py will show you the options:

spades.py

This produces:

SPAdes genome assembler v3.10.1

Usage: /usr/local/SPAdes-3.10.1-Linux/bin/spades.py [options] -o <output_dir>

Basic options:
-o      <output_dir>    directory to store all the resulting files (required)
--sc                    this flag is required for MDA (single-cell) data
--meta                  this flag is required for metagenomic sample data
--rna                   this flag is required for RNA-Seq data
--plasmid               runs plasmidSPAdes pipeline for plasmid detection
--iontorrent            this flag is required for IonTorrent data
--test                  runs SPAdes on toy dataset
-h/--help               prints this usage message
-v/--version            prints version

Input data:
--12    <filename>      file with interlaced forward and reverse paired-end reads
-1      <filename>      file with forward paired-end reads
-2      <filename>      file with reverse paired-end reads
-s      <filename>      file with unpaired reads
--pe<#>-12      <filename>      file with interlaced reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-1       <filename>      file with forward reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-2       <filename>      file with reverse reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-s       <filename>      file with unpaired reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-<or>    orientation of reads for paired-end library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--s<#>          <filename>      file with unpaired reads for single reads library number <#> (<#> = 1,2,..,9)
--mp<#>-12      <filename>      file with interlaced reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-1       <filename>      file with forward reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-2       <filename>      file with reverse reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-s       <filename>      file with unpaired reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-<or>    orientation of reads for mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--hqmp<#>-12    <filename>      file with interlaced reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-1     <filename>      file with forward reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-2     <filename>      file with reverse reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-s     <filename>      file with unpaired reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-<or>  orientation of reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--nxmate<#>-1   <filename>      file with forward reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--nxmate<#>-2   <filename>      file with reverse reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--sanger        <filename>      file with Sanger reads
--pacbio        <filename>      file with PacBio reads
--nanopore      <filename>      file with Nanopore reads
--tslr  <filename>      file with TSLR-contigs
--trusted-contigs       <filename>      file with trusted contigs
--untrusted-contigs     <filename>      file with untrusted contigs

Pipeline options:
--only-error-correction runs only read error correction (without assembling)
--only-assembler        runs only assembling (without read error correction)
--careful               tries to reduce number of mismatches and short indels
--continue              continue run from the last available check-point
--restart-from  <cp>    restart run with updated options and from the specified check-point ('ec', 'as', 'k<int>', 'mc')
--disable-gzip-output   forces error correction not to compress the corrected reads
--disable-rr            disables repeat resolution stage of assembling

Advanced options:
--dataset       <filename>      file with dataset description in YAML format
-t/--threads    <int>           number of threads
                                [default: 16]
-m/--memory     <int>           RAM limit for SPAdes in Gb (terminates if exceeded)
                                [default: 250]
--tmp-dir       <dirname>       directory for temporary files
                                [default: <output_dir>/tmp]
-k              <int,int,...>   comma-separated list of k-mer sizes (must be odd and
                                less than 128) [default: 'auto']
--cov-cutoff    <float>         coverage cutoff value (a positive float number, or 'auto', or 'off') [default: 'off']
--phred-offset  <33 or 64>      PHRED quality offset in the input reads (33 or 64)
                                [default: auto-detect]

As you can see this is also a “pipeline” of tools that can be switched on or off. SPAdes takes quite a long time, so for the purposes of this practical, something like this may suffice:

spades.py -t 4 \
          -m 32 \
          -k 31,51,71 \
          --only-assembler \
          -1 miseq.1.fastq -2 miseq.2.fastq \
          --nanopore minion.fastq \
          -o hybrid_assembly

In turn, these parameters mean

• use 4 threads
• max memory is 32Gb
• use 3 kmer values to build the de bruijn graph(s) - 31, 51 and 71
• only run the assembler, not the correction algorithm (for speed)
• read 1 and read 2 of the MiSeq data
• the nanopore data
• put the output in folder “hybrid_assembly”

Prokka – Standalone command line tool, takes just a few minutes per genome. This is the best way to get good quality annotation in a flash, which is particularly useful if you have loads of genomes or need to annotate a pangenome or metagenome. Note however that the quality of functional information is not as good as RAST, and you will need several extra steps if you want to do functional profiling and pathway analysis of your genome(s)… which is in-built in RAST.

NCBI Prokaryotic Genome Annotation Pipeline is designed to annotate bacterial and archaeal genomes (chromosomes and plasmids).

Genome annotation is a multi-level process that includes prediction of protein-coding genes, as well as other functional genome units such as structural RNAs, tRNAs, small RNAs, pseudogenes, control regions, direct and inverted repeats, insertion sequences, transposons and other mobile elements.

PGAP: NCBI has developed an automatic prokaryotic genome annotation pipeline that combines ab initio gene prediction algorithms with homology based methods. The first version of NCBI Prokaryotic Genome Automatic Annotation Pipeline (PGAAP; see Pubmed Article) developed in 2005 has been replaced with an upgraded version that is capable of processing a larger data volume.  NCBI's annotation pipeline depends on several internal databases and is not currently available for download or use outside of the NCBI environment.

BEACON (automated tool for Bacterial GEnome Annotation ComparisON), a fast tool for an automated and a systematic comparison of different annotations of single genomes. The extended annotation assigns putative functions to many genes with unknown functions. BEACON is available under GNU General Public License version 3.0 and is accessible at: http://www.cbrc.kaust.edu.sa/BEACON/.

BlastKOLA: Assigns K numbers to the user's sequence data by BLAST searches, respectively, against a nonredundant set of KEGG GENES. KOALA (KEGG Orthology And Links Annotation) is KEGG's internal annotation tool for K number assignment of KEGG GENES using SSEARCH computation. Annotate Sequence in KEGG Mapper and Pathogen Checker in KEGG Pathogen are special interfaces to this server and can be executed in an interactive mode. BlastKOALA is suitable for annotating fully sequenced genomes.

PAGIT: Provides a toolkit for improving the quality of genome assemblies created via an assembly software. PAGIT compiled four tools: (i) ABACAS which classifies and orientates contigs and estimates the sizes of gaps between them; (ii) IMAGE uses paired-end reads to extend contigs and close gaps within the scaffolds; (iii) ICORN for identifying and correcting small errors in consensus sequences and; (iv) RATT for help annotation. The software was mainly created to analyze parasite genomes of up to about 300 Mb.

MAKER: A portable and easily configurable genome annotation pipeline. MAKER allows smaller eukaryotic and prokaryotic genome projects to independently annotate their genomes and to create genome databases. It identifies repeats, aligns ESTs and proteins to a genome, produces ab-initio gene predictions and automatically synthesizes these data into gene annotations having evidence-based quality values. MAKER's inputs are minimal and its ouputs can be directly loaded into a Generic Model Organism Database (GMOD). They can also be viewed in the Apollo genome browser; this feature of MAKER provides an easy means to annotate, view and edit individual contigs and BACs without the overhead of a database. MAKER is available for download and can be tested online via the MAKER Web Annotation Service (MWAS).

MyPro is a software pipeline for high-quality prokaryotic genome assembly and annotation. It was validated on 18 oral streptococcal strains to produce submission-ready, annotated draft genomes. MyPro installed as a virtual machine and supported by updated databases will enable biologists to perform quality prokaryotic genome assembly and annotation with ease.

Magic-BLAST incorporates within the NCBI BLAST code framework ideas developed in the NCBI Magic pipeline, in particular hit extensions by local walk and jump (http://www.ncbi.nlm.nih.gov/pubmed/26109056), and recursive clipping of mismatches near the edges of the reads, which avoids accumulating artefactual mismatches near splice sites and is needed to distinguish short indels from substitutions near the edges.

Address of the bookmark: https://ncbi.github.io/magicblast/

ABySS Explorer

Interactive Java application that uses a novel graph-based representation to display a sequence assembly and associated metadata

http://www.bcgsc.ca/platform/bioinfo/software/abyss-explorer

BamView

Genome browser and annotation tool that allows visualization of sequence features, next-generation sequencing (NGS) data and the results of analyses within the context of the sequence, and also its six-frame translation

http://www.sanger.ac.uk/resources/software/artemis/

DNannotator 

Annotation web toolkit for regional genomic sequences

http://bioapp.psych.uic.edu/DNannotator.htm

JVM 

Java Visual Mapping tool for NGS reads

http://www.springer.com/cda/content/document/cda_downloaddocument/9789401792448-c2.pdf?SGWID=0-0-45-1487072-p176815501

LookSeq 

Web-based visualization of sequences derived from multiple sequencing technologies. Low- or high-depth read pileups and easy visualization of putative single nucleotide and structural variation

http://lookseq.sourceforge.net

MagicViewer 

Visualization of short read alignment, identification of genetic variation and association with annotation information of a reference genome

http://bioinformatics.zj.cn/magicviewer/

MapView 

Alignments of huge-scale single-end and pair-end short reads

http://omictools.com/mapview-s1367.html

MultiPipMaker

Computes alignments of similar regions in two DNA sequences. The resulting alignments are summarized with a ‘percent identity plot’ (pip)

http://pipmaker.bx.psu.edu/pipmaker/

PileLineGUI 

Handling genome position files in NGS studies

http://sing.ei.uvigo.es/pileline/pilelinegui.html

SAMtools tview 

Simple and fast text alignment viewer; NGS compatible

http://www.htslib.org/

SEWAL

Uses a locality-sensitive hashing algorithm to enumerate all unique sequences in an entire Illumina sequencing run

http://www.sourceforge.net/projects/sewal

STAR 

A web-based integrated solution to management and visualization of sequencing data

http://wanglab.ucsd.edu/star/browser

SVA 

Software for annotating and visualizing sequenced human genomes

http://www.svaproject.org

Viewer (IGV) 

Visualization of large heterogeneous datasets, providing a smooth and intuitive user experience at all levels of genome resolution

https://www.broadinstitute.org/igv/

ZOOM Lite 

NGS data mapping and visualization software

http://bioinfor.com/zoom/lite/