BOL: Related items

Platanus

Jit — Fri, 13 May 2016 05:12:40 -0500

Platanus is a novel de novo sequence assembler that can reconstruct genomic sequences of
highly heterozygous diploids from massively parallel shotgun sequencing data.

The latest version is 1.2.4.

To cite Platanus, please use the following:

Kajitani R, Toshimoto K, Noguchi H, Toyoda A, Ogura Y, Okuno M, Yabana M, Harada M, Nagayasu E, Maruyama H, Kohara Y, Fujiyama A, Hayashi T, Itoh T, “Efficient de novo assembly of highly heterozygous genomes from whole-genome shotgun short reads”. Genome Res. 2014 Aug;24(8):1384-95. doi: 10.1101/gr.170720.113. [abstract | full text]

Address of the bookmark: http://platanus.bio.titech.ac.jp/

Meraculous: De Novo Genome Assembly with Short Paired-End Reads

Jit — Tue, 07 Nov 2017 04:36:10 -0600

We describe a new algorithm, meraculous, for whole genome assembly of deep paired-end short reads, and apply it to the assembly of a dataset of paired 75-bp Illumina reads derived from the 15.4 megabase genome of the haploid yeast Pichia stipitis. More than 95% of the genome is recovered, with no errors; half the assembled sequence is in contigs longer than 101 kilobases and in scaffolds longer than 269 kilobases. Incorporating fosmid ends recovers entire chromosomes. Meraculous relies on an efficient and conservative traversal of the subgraph of the k-mer (deBruijn) graph of oligonucleotides with unique high quality extensions in the dataset, avoiding an explicit error correction step as used in other short-read assemblers. A novel memory-efficient hashing scheme is introduced. The resulting contigs are ordered and oriented using paired reads separated by ∼280 bp or ∼3.2 kbp, and many gaps between contigs can be closed using paired-end placements. Practical issues with the dataset are described, and prospects for assembling larger genomes are discussed.

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3158087/

De novo Genome Assembly for Illumina Data

Rahul Nayak — Mon, 20 Jan 2020 05:13:29 -0600

Written and maintained by Simon Gladman - Melbourne Bioinformatics (formerly VLSCI)

Protocol Overview / Introduction

In this protocol we discuss and outline the process of de novo assembly for small to medium sized genomes.

https://www.melbournebioinformatics.org.au/tutorials/tutorials/assembly/assembly-protocol/

Address of the bookmark: https://www.melbournebioinformatics.org.au/tutorials/tutorials/assembly/assembly-protocol/

Protocol for De novo Genome Assembly using Illumina Reads

BioStar — Sat, 16 Jan 2021 21:42:11 -0600

In this protocol, we address and describe the de novo assembly method for small to medium-sized genomes.

What is de novo genome assembly?
The method of taking a large number of short DNA sequences and placing them back together to create a reflection of the original chromosomes from which the DNA originated relates to genome assembly. No previous knowledge of the source DNA sequence length, structure or composition is inferred by De novo genome assemblies. The DNA of the target organism is split up into millions of tiny parts and read on a sequencing computer in a genome sequencing experiment. Depending on the sequencing system used, these "reads" range from 20 to 1000 nucleotide base pairs (bp) in length. Usually, length reads of 36 - 150 bp are produced for Illumina style short read sequencing. These reads can be either “single ended” as described above or “paired end.”

Why genome assembly?
In basic research into why and how they live, as well as in applied topics, identifying the DNA sequence of an organism is useful. Awareness of a DNA sequence may be useful in virtually any biological research because of the relevance of DNA to living things. For example, it may be used in medicine to classify, diagnose and eventually improve genetic disorder therapies. Similarly, pathogens study can lead to treatments for infectious diseases.

Raw NGS data
Reads can be saved as a Fasta file as text or in a FastQ file with their attributes. FastQ is the most common read file format since this is what the Illumina sequencing pipeline creates. This will henceforth be the subject of our conversation.

In a nutshell the protocol:
Get the sequence file(s) read from the sequencing machine (s).
Look at the readings - have an idea of what you have and what the standard is like.
If required, raw data cleanup/quality trimming.
Choose an adequate parameter set for assembly.
Assemble the data into scaffolds/contigs.
Examine the assembly performance and determine the efficiency of the assembly.

Read Quality Control:
Check the qualiy with fastQC.
Script
https://bioinformaticsonline.com/snippets/view/42540/install-fastqc-using-conda

Quality trimming/cleanup of read files.
This function trims adapters, barcodes and other contaminants from the reads.
Script
https://bioinformaticsonline.com/snippets/view/42542/trimmomatic-command

Genome Assembly:
The object of this portion of the protocol is to explain the method of assembling the reads trimmed by quality into draft contigs.

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o result_of_spades_assembly_all_illumina

A significant range of short-read assemblers are available. Everyone with strengths and disadvantages of their own.
Some of the assemblers available include:
Velvet
SOAP-denovo
MIRA
ALLPATHS

Next step is to assess the suitability and what to do with a draft package of contiguous details for the remainder of the study now. Few stuff you can note about the contigs you just created: They're the draft Contigs. Any mis-assemblies can occur.

Mis-assembly checking and assembly metric tools:
QUAST - Quality assessment tool for genome assembly http://bioinf.spbau.ru/quast
Mauve assembly metrics - http://code.google.com/p/ngopt/wiki/How_To_Score_Genome_Assemblies_with_Mauve
InGAP-SV - https://sites.google.com/site/nextgengenomics/ingap and http://ingap.sourceforge.net/
inGAP is also useful for finding structural variants between genomes from read mappings.

Genome finishing tools:
Semi-automated gap fillers:
Gap filler - http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/gapfiller/

IMAGE (V2) - http://sourceforge.net/apps/mediawiki/image2/index.php?title=Main_Page

Genome visualisers and editors:
Artemis - http://www.sanger.ac.uk/resources/software/artemis/
IGV - http://www.broadinstitute.org/igv/

Automated and semi automated annotation tools:
Prokka - https://github.com/tseemann/prokka
RAST - http://www.nmpdr.org/FIG/wiki/view.cgi/FIG/RapidAnnotationServer
JCVI Annotation Service - http://www.jcvi.org/cms/research/projects/annotation-service/

Frequent command use for the analysis are at:

https://bioinformaticsonline.com/blog/view/38765/list-of-tools-frequently-used-while-genome-assembly
https://bioinformaticsonline.com/pages/view/42275/frequent-parameters-for-bioinformatics-tools

3d-dna: 3D de novo assembly (3D DNA) pipeline

Jit — Thu, 28 Dec 2017 10:09:37 -0600

This code is designed to enable anyone to reproduce the Hs2-HiC and the AaegL4 genomes reported in: Dudchenko et al., De novo assembly of the Aedes aegypti genome using Hi-C yields chromosome-length scaffolds. Science, 2017.

Unless otherwise noted, all terminology below is consistent with this paper, and all references to figures and tables in this readme refer to this paper. Specifically, some of the terminology used below is outlined in Figure S2. The assembly procedure is described in detail in the Supporting Online Materials, specifically in the section labelled “Pipeline description”.

In addition, the pipeline uses tools and methods from Juicer (Durand & Shamim et al., Cell Systems, 2016) and Juicebox (Durand & Robinson et al., Cell Systems, 2016), as well as additional dependencies noted below.

Feel free to post your questions and comments at: http://www.aidenlab.org/forum.html

http://aidenlab.org/documentation.html

Address of the bookmark: https://github.com/theaidenlab/3d-dna

MECAT: fast mapping, error correction, and de novo assembly for single-molecule sequencing reads

Rahul Nayak — Fri, 11 May 2018 05:07:45 -0500

MECAT is an ultra-fast Mapping, Error Correction and de novo Assembly Tools for single molecula sequencing (SMRT) reads. MECAT employs novel alignment and error correction algorithms that are much more efficient than the state of art of aligners and error correction tools. MECAT can be used for effectively de novo assemblying large genomes. For example, on a 32-thread computer with 2.0 GHz CPU , MECAT takes 9.5 days to assemble a human genome based on 54x SMRT data, which is 40 times faster than the current PBcR-Mhap pipeline. MECAT performance were compared with PBcR-Mhap pipeline, FALCON and Canu(v1.3) in five real datasets. The quality of assembled contigs produced by MECAT is the same or better than that of the PBcR-Mhap pipeline and FALCON.

https://www.nature.com/articles/nmeth.4432

Address of the bookmark: https://github.com/xiaochuanle/MECAT

transrate: Understanding your transcriptome assembly

Neel — Fri, 13 Jul 2018 07:49:26 -0500

Transrate is software for de-novo transcriptome assembly quality analysis. It examines your assembly in detail and compares it to experimental evidence such as the sequencing reads, reporting quality scores for contigs and assemblies. This allows you to choose between assemblers and parameters, filter out the bad contigs from an assembly, and help decide when to stop trying to improve the assembly.

Address of the bookmark: http://hibberdlab.com/transrate/index.html

NextDenovo: string graph-based de novo assembler for TGS long reads

Jit — Sun, 05 Jan 2020 04:08:29 -0600

NextDenovo is a string graph-based de novo assembler for TGS long reads. It uses a "correct-then-assemble" strategy similar to canu, but requires significantly less computing resources and storages. After assembly, the per-base error rate is about 97-98%, to further improve single base accuracy, please use NextPolish.

NextDenovo contains two core modules: NextCorrect and NextGraph. NextCorrect can be used to correct TGS long reads with approximately 15% sequencing errors, and NextGraph can be used to construct a string graph with corrected reads. It also contains a modified version of minimap2 for adapting input and output and producing more sensitive and accurate dovetail overlaps, and some useful utilities (see here for more details).

Address of the bookmark: https://github.com/Nextomics/NextDenovo

ContigExtender: a new approach to improving de novo sequence assembly for viral metagenomics data

LEGE — Wed, 08 May 2024 07:32:45 -0500

ContigExtender, was developed to extend contigs, complementing de novo assembly. ContigExtender employs a novel recursive Overlap Layout Candidates (r-OLC) strategy that explores multiple extending paths to achieve longer and highly accurate contigs. ContigExtender is effective for extending contigs significantly in in silico synthesized and real metagenomics datasets.

More at https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7953547/

Address of the bookmark: https://github.com/dengzac/contig-extender

Hagfish - assess an assembly through creative use of coverage plots

Abhi — Fri, 20 May 2016 19:08:17 -0500

Hagfish is a tool that is to be used in data analysis of Next Generation Sequencing (NGS) experiments. Hagfish builds on the concept of coverage plots and aims to assist (amongst others) in quality control of de novo genome assembly or identification of structural variation in a genome re-sequencing experiment.

Hagfish requires a reference sequence and a paired end re-sequencing data set. Hagfish has more power the larger the insert size of the paired end library is.

Quick links: Installation,Operation, Read mappers, Hagfish scripts, Hagfish plots

Address of the bookmark: https://github.com/mfiers/hagfish