BOL: Related items

Stacks

Jitendra Narayan — Wed, 24 Feb 2016 15:52:30 -0600

Stacks is a software pipeline for building loci from short-read sequences, such as those generated on the Illumina platform. Stacks was developed to work with restriction enzyme-based data, such as RAD-seq, for the purpose of building genetic maps and conducting population genomics and phylogeography.

More at http://catchenlab.life.illinois.edu/stacks/

Address of the bookmark: http://catchenlab.life.illinois.edu/stacks/

Sequence assembly with MIRA 4

Priya Singh — Wed, 06 Apr 2016 08:21:22 -0500

MIRA is a multi-pass DNA sequence data assembler/mapper for whole genome and EST/RNASeq projects. MIRA assembles/maps reads gained by

electrophoresis sequencing (aka Sanger sequencing)
454 pyro-sequencing (GS20, FLX or Titanium)
Ion Torrent
Solexa (Illumina) sequencing
(in development) Pacific Biosciences sequencing

into contiguous sequences (called contigs). One can use the sequences of different sequencing technologies either in a single assembly run (a true hybrid assembly) or by mapping one type of data to an assembly of other sequencing type (a semi-hybrid assembly (or mapping)) or by mapping a data against consensus sequences of other assemblies (a simple mapping).

The MIRA acronym stands for Mimicking Intelligent Read Assembly and the program pretty well does what its acronym says (well, most of the time anyway). It is the Swiss army knife of sequence assembly that I've used and developed during the past 14 years to get assembly jobs I work on done efficiently - and especially accurately. That is, without me actually putting too much manual work into it.

More at http://mira-assembler.sourceforge.net/docs/DefinitiveGuideToMIRA.html

Address of the bookmark: http://mira-assembler.sourceforge.net/docs/DefinitiveGuideToMIRA.html

Trimmomatic: A flexible read trimming tool for Illumina NGS data

Jit — Fri, 15 Apr 2016 05:58:53 -0500

Paired End:

java -jar trimmomatic-0.35.jar PE -phred33 input_forward.fq.gz input_reverse.fq.gz output_forward_paired.fq.gz output_forward_unpaired.fq.gz output_reverse_paired.fq.gz output_reverse_unpaired.fq.gz ILLUMINACLIP:TruSeq3-PE.fa:2:30:10 LEADING:3 TRAILING:3 SLIDINGWINDOW:4:15 MINLEN:36

This will perform the following:

Remove adapters (ILLUMINACLIP:TruSeq3-PE.fa:2:30:10)
Remove leading low quality or N bases (below quality 3) (LEADING:3)
Remove trailing low quality or N bases (below quality 3) (TRAILING:3)
Scan the read with a 4-base wide sliding window, cutting when the average quality per base drops below 15 (SLIDINGWINDOW:4:15)
Drop reads below the 36 bases long (MINLEN:36)

More at http://www.usadellab.org/cms/?page=trimmomatic

Address of the bookmark: http://www.usadellab.org/cms/?page=trimmomatic

segemehl

Anjana — Tue, 10 May 2016 08:10:15 -0500

segemehl is a software to map short sequencer reads to reference genomes. Unlike other methods, segemehl is able to detect not only mismatches but also insertions and deletions. Furthermore, segemehl is not limited to a specific read length and is able to map primer- or polyadenylation contaminated reads correctly. segemehl implements a matching strategy based on enhanced suffix arrays (ESA).

More at http://www.bioinf.uni-leipzig.de/Software/segemehl/

Manual http://www.bioinf.uni-leipzig.de/Software/segemehl/segemehl_manual_0_1_7.pdf

Address of the bookmark: http://hoffmann.bioinf.uni-leipzig.de/LIFE/segemehl.html

CANU: Assembling Large Genomes with Single-Molecule Sequencing and Locality Sensitive Hashing.

Jit — Tue, 26 Apr 2016 11:38:10 -0500

Canu is a fork of the Celera Assembler designed for high-noise single-molecule sequencing (such as the PacBio RSII or Oxford Nanopore MinION). The software is currently alpha level, feel free to use and report issues encountered.

Canu is a hierachical assembly pipeline which runs in four steps:

Detect overlaps in high-noise sequences using MHAP
Generate corrected sequence consensus
Trim corrected sequences
Assemble trimmed corrected sequences

Read the documentation

New release https://github.com/marbl/canu/releases

Address of the bookmark: https://github.com/marbl/canu

GATB : Genome Analysis Toolbox with de-Bruijn graph

Jit — Thu, 28 Apr 2016 11:16:51 -0500

The Genome Analysis Toolbox with de-Bruijn graph (GATB) provides a set of highly efficient algorithms to analyse NGS data sets. These methods enable the analysis of data sets of any size on multi-core desktop computers, including very huge amount of reads data coming from any kind of organisms such as bacteria, plants, animals and even complex samples (e.g. metagenomes).

More at https://gatb.inria.fr/

Address of the bookmark: https://gatb.inria.fr/

Andi

Jit — Fri, 13 May 2016 05:16:35 -0500

This is the andi program for estimating the evolutionary distance between closely related genomes. These distances can be used to rapidly infer phylogenies for big sets of genomes. Because andi does not compute full alignments, it is so efficient that it scales even up to thousands of bacterial genomes.

This readme covers all necessary instructions for the impatient to get andi up and running. For extensive instructions please consult the manual.

More at https://github.com/evolbioinf/andi/

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2015/01/13/bioinformatics.btu815.full

Hagfish - assess an assembly through creative use of coverage plots

Abhi — Fri, 20 May 2016 19:08:17 -0500

Hagfish is a tool that is to be used in data analysis of Next Generation Sequencing (NGS) experiments. Hagfish builds on the concept of coverage plots and aims to assist (amongst others) in quality control of de novo genome assembly or identification of structural variation in a genome re-sequencing experiment.

Hagfish requires a reference sequence and a paired end re-sequencing data set. Hagfish has more power the larger the insert size of the paired end library is.

Quick links: Installation,Operation, Read mappers, Hagfish scripts, Hagfish plots

Address of the bookmark: https://github.com/mfiers/hagfish

Blobology

Jit — Mon, 13 Jun 2016 10:18:33 -0500

Tools for making blobplots or Taxon-Annotated-GC-Coverage plots (TAGC plots) to visualise the contents of genome assembly data sets as a QC step

Blaxter Lab, Institute of Evolutionary Biology, University of Edinburgh

Goal: To create blobplots or Taxon-Annotated-GC-Coverage plots (TAGC plots) to visualise the contents of genome assembly data sets as a QC step.

This repository accompanies the paper:
Blobology: exploring raw genome data for contaminants, symbionts and parasites using taxon-annotated GC-coverage plots. Sujai Kumar, Martin Jones, Georgios Koutsovoulos, Michael Clarke, Mark Blaxter
(submitted 2013-10-01 to Frontiers in Bioinformatics and Computational Biology special issue : Quality assessment and control of high-throughput sequencing data).

It contains bash/perl/R scripts for running the analysis presented in the paper to create a preliminary assembly, and to create and collate GC content, read coverage and taxon annotation for the preliminary assembly, which can be visualised, such as Figure 2a from the paper showing TAGC plots/blobplots for Caenorhabditis sp. 5:

Address of the bookmark: https://github.com/blaxterlab/blobology

Samtools Primer !!

Jit — Thu, 23 Jun 2016 07:18:17 -0500

SAMtools: Primer / Tutorial by Ethan Cerami, Ph.D.

keywords: samtools, next-gen, next-generation, sequencing, bowtie, sam, bam, primer, tutorial, how-to, introduction
Revisions

    1.0: May 30, 2013: First public release on biobits.org.
    1.1: July 24, 2013: Updated with Disqus Comments / Feedback section.
    1.2: December 19, 2014: Multiple updates, including:
        Updated to use samtools 1.1 and bcftools 1.2.
        Updated usage for bcftools.

About

SAMtools is a popular open-source tool used in next-generation sequence analysis. This primer provides an introduction to SAMtools, and is geared towards those new to next-generation sequence analysis. The primer is also designed to be self-contained and hands-on, meaning that you only need to install SAMtools, and no other tools, and sample data sets are provided. Terms in bold are also explained in the glossary at the end of the document.

Address of the bookmark: http://biobits.org/samtools_primer.html