BOL: Related items

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

ReMILO: reference assisted misassembly detection algorithm using short and long reads.

Jit — Fri, 06 Jul 2018 04:27:49 -0500

ReMILO, a reference assisted misassembly detection algorithm that uses both short reads and PacBio SMRT long reads. ReMILO aligns the initial short reads to both the contigs and reference genome, and then constructs a novel data structure called red-black multipositional de Bruijn graph to detect misassemblies. In addition, ReMILO also aligns the contigs to long reads and find their differences from the long reads to detect more misassemblies.

Address of the bookmark: https://github.com/songc001/remilo

Rebaler: program for conducting reference-based assemblies using long reads.

Jit — Tue, 18 Sep 2018 07:52:41 -0500

Rebaler is a program for conducting reference-based assemblies using long reads. It relies mainly on minimap2 for alignment and Racon for making consensus sequences.

I made Rebaler for bacterial genomes (specifically for the task of testing basecallers). It should in principle work for non-bacterial genomes as well, but I haven't tested it.

Address of the bookmark: https://github.com/rrwick/Rebaler

COSINE: non-seeding method for mapping long noisy sequences

Jit — Fri, 26 Oct 2018 00:41:59 -0500

Third generation sequencing (TGS) are highly promising technologies but the long and noisy reads from TGS are difficult to align using existing algorithms. Here, we present COSINE, a conceptually new method designed specifically for aligning long reads contaminated by a high level of errors.

Address of the bookmark: https://github.com/SUwonglab/COSINE

NextDenovo: string graph-based de novo assembler for TGS long reads

Jit — Sun, 05 Jan 2020 04:08:29 -0600

NextDenovo is a string graph-based de novo assembler for TGS long reads. It uses a "correct-then-assemble" strategy similar to canu, but requires significantly less computing resources and storages. After assembly, the per-base error rate is about 97-98%, to further improve single base accuracy, please use NextPolish.

NextDenovo contains two core modules: NextCorrect and NextGraph. NextCorrect can be used to correct TGS long reads with approximately 15% sequencing errors, and NextGraph can be used to construct a string graph with corrected reads. It also contains a modified version of minimap2 for adapting input and output and producing more sensitive and accurate dovetail overlaps, and some useful utilities (see here for more details).

Address of the bookmark: https://github.com/Nextomics/NextDenovo

HiCanu: accurate assembly of segmental duplications, satellites, and allelic variants from high-fidelity long reads

BioStar — Fri, 27 Mar 2020 22:49:31 -0500

HiCanu, a significant modification of the Canu assembler designed to leverage the full potential of HiFi reads via homopolymer compression, overlap-based error correction, and aggressive false overlap filtering.

More at https://www.biorxiv.org/content/10.1101/2020.03.14.992248v3

Address of the bookmark: https://github.com/marbl/canu

FinisherSC: a repeat-aware and scalable tool for upgrading de novo assembly using long reads

Jit — Mon, 27 Feb 2017 09:49:45 -0600

FinisherSC, a repeat-aware and scalable tool for upgrading de novo assembly using long reads. Experiments with real data suggest that FinisherSC can provide longer and higher quality contigs than existing tools while maintaining high concordance.

Address of the bookmark: http://kakitone.github.io/finishingTool/

CoLoRMap: Correcting Long Reads by Mapping short reads

Jit — Mon, 20 Aug 2018 14:17:05 -0500

Second generation sequencing technologies paved the way to an exceptional increase in the number of sequenced genomes, both prokaryotic and eukaryotic. However, short reads are difficult to assemble and often lead to highly fragmented assemblies. The recent developments in long reads sequencing methods offer a promising way to address this issue. However, so far long reads are characterized by a high error rate, and assembling from long reads require a high depth of coverage. This motivates the development of hybrid approaches that leverage the high quality of short reads to correct errors in long reads.We introduce CoLoRMap, a hybrid method for correcting noisy long reads, such as the ones produced by PacBio sequencing technology, using high-quality Illumina paired-end reads mapped onto the long reads. Our algorithm is based on two novel ideas: using a classical shortest path algorithm to find a sequence of overlapping short reads that minimizes the edit score to a long read and extending corrected regions by local assembly of unmapped mates of mapped short reads. Our results on bacterial, fungal and insect data sets show that CoLoRMap compares well with existing hybrid correction methods.The source code of CoLoRMap is freely available for non-commercial use at https://github.com/sfu-compbio/colormap

ehaghshe@sfu.ca or cedric.chauve@sfu.ca

Address of the bookmark: https://github.com/sfu-compbio/colormap

Read Simulators

Abhi — Fri, 30 Sep 2022 06:48:18 -0500

Short Read Simulators

With the popularity of next-generation sequencing (NGS) technologies, many NGS read simulators have been developed. Currently, many of the popular short read simulators are designed to simulate reads mimicking many Illumina, 454 and SOLiD platforms. Listed below are some popular short read simulators. Links to their publications are provided as well.

Long Read Simulators

With the advancements in sequencing technologies, scientists have shown an increasing interest in using third-generation sequencing (TGS) technologies. Currently, many of the popular long read simulators are designed to simulate reads mimicking the two main TGS technologies; (1) Pacific Biosciences (PacBio) and (2) Oxford Nanopore (ONT). Listed below are some of the popular and recently introduced PacBio and ONT simulators. Links to their publications are provided as well.

PacBio Simulators

ONT Simulators

BamView: a free interactive display of read alignments in BAM data files

Neel — Fri, 09 Nov 2018 13:43:22 -0600

To run the application on UNIX from the downloaded jar file run the UNIX:

java -mx512m -jar BamView.jar

and extra command line options are given when '-h' is used:

java -jar BamView.jar -h

BAM files can be specified on the command line with the '-a' option:

java -mx512m -jar BamView.jar -a pathToFile/sorted.bam

If a BAM filename is not given on the command line BamView will prompt for a file to be entered. The BAM index file should have the same name as the BAM file but with a '.bai' suffix. Multiple BAM files can be loaded and overlaid in the viewer. To make this easier BamView will read in files that contain a list of filenames.

Address of the bookmark: http://bamview.sourceforge.net/