BOL: Related items

RATT

Jitendra Narayan — Sun, 07 Feb 2016 16:09:40 -0600

RATT is software to transfer annotation from a reference (annotated) genome to an unannotated query genome.

It was first developed to transfer annotations between different genome assembly versions. However, it can also transfer annotations between strains and even different species, like Plasmodium chabaudi onto P. berghei, between different Leishmania species or Salmonella enterica onto other Salmonella serotypes. RATT is able to transfer any entries present on a reference sequence, such as the systematic id or an annotator's notes; such information would be lost in a de novo annotation.

More at http://ratt.sourceforge.net/

Address of the bookmark: http://ratt.sourceforge.net/

Pilon

Rahul Nayak — Mon, 08 Feb 2016 15:56:18 -0600

Pilon is a software tool which can be used to:

Automatically improve draft assemblies
Find variation among strains, including large event detection

Pilon requires as input a FASTA file of the genome along with one or more BAM files of reads aligned to the input FASTA file. Pilon uses read alignment analysis to identify inconsistencies between the input genome and the evidence in the reads. It then attempts to make improvements to the input genome, including:

Single base differences
Small indels
Larger indel or block substitution events
Gap filling
Identification of local misassemblies, including optional opening of new gaps

More at https://github.com/broadinstitute/pilon/wiki

Address of the bookmark: https://github.com/broadinstitute/pilon/wiki

RNA-Seq De novo Assembly Using Trinity

Surabhi Chaudhary — Wed, 23 Mar 2016 05:53:46 -0500

Trinity, developed at the Broad Institute and the Hebrew University of Jerusalem, represents a novel method for the efficient and robust de novo reconstruction of transcriptomes from RNA-seq data. Trinity combines three independent software modules: Inchworm, Chrysalis, and Butterfly, applied sequentially to process large volumes of RNA-seq reads. Trinity partitions the sequence data into many individual de Bruijn graphs, each representing the transcriptional complexity at at a given gene or locus, and then processes each graph independently to extract full-length splicing isoforms and to tease apart transcripts derived from paralogous genes. Briefly, the process works like so:

Inchworm assembles the RNA-seq data into the unique sequences of transcripts, often generating full-length transcripts for a dominant isoform, but then reports just the unique portions of alternatively spliced transcripts.
Chrysalis clusters the Inchworm contigs into clusters and constructs complete de Bruijn graphs for each cluster. Each cluster represents the full transcriptonal complexity for a given gene (or sets of genes that share sequences in common). Chrysalis then partitions the full read set among these disjoint graphs.
Butterfly then processes the individual graphs in parallel, tracing the paths that reads and pairs of reads take within the graph, ultimately reporting full-length transcripts for alternatively spliced isoforms, and teasing apart transcripts that corresponds to paralogous genes.

More at https://github.com/trinityrnaseq/trinityrnaseq/wiki

......................................................................................................................................

Download Trinity here.

Build Trinity by typing 'make' in the base installation directory.

Assemble RNA-Seq data like so:

 Trinity --seqType fq --left reads_1.fq --right reads_2.fq --CPU 6 --max_memory 20G

Find assembled transcripts as: 'trinity_out_dir/Trinity.fasta'

Address of the bookmark: https://github.com/trinityrnaseq/trinityrnaseq/wiki

Sequence assembly with MIRA 4

Priya Singh — Wed, 06 Apr 2016 08:21:22 -0500

MIRA is a multi-pass DNA sequence data assembler/mapper for whole genome and EST/RNASeq projects. MIRA assembles/maps reads gained by

electrophoresis sequencing (aka Sanger sequencing)
454 pyro-sequencing (GS20, FLX or Titanium)
Ion Torrent
Solexa (Illumina) sequencing
(in development) Pacific Biosciences sequencing

into contiguous sequences (called contigs). One can use the sequences of different sequencing technologies either in a single assembly run (a true hybrid assembly) or by mapping one type of data to an assembly of other sequencing type (a semi-hybrid assembly (or mapping)) or by mapping a data against consensus sequences of other assemblies (a simple mapping).

The MIRA acronym stands for Mimicking Intelligent Read Assembly and the program pretty well does what its acronym says (well, most of the time anyway). It is the Swiss army knife of sequence assembly that I've used and developed during the past 14 years to get assembly jobs I work on done efficiently - and especially accurately. That is, without me actually putting too much manual work into it.

More at http://mira-assembler.sourceforge.net/docs/DefinitiveGuideToMIRA.html

Address of the bookmark: http://mira-assembler.sourceforge.net/docs/DefinitiveGuideToMIRA.html

Trimmomatic: A flexible read trimming tool for Illumina NGS data

Jit — Fri, 15 Apr 2016 05:58:53 -0500

Paired End:

java -jar trimmomatic-0.35.jar PE -phred33 input_forward.fq.gz input_reverse.fq.gz output_forward_paired.fq.gz output_forward_unpaired.fq.gz output_reverse_paired.fq.gz output_reverse_unpaired.fq.gz ILLUMINACLIP:TruSeq3-PE.fa:2:30:10 LEADING:3 TRAILING:3 SLIDINGWINDOW:4:15 MINLEN:36

This will perform the following:

Remove adapters (ILLUMINACLIP:TruSeq3-PE.fa:2:30:10)
Remove leading low quality or N bases (below quality 3) (LEADING:3)
Remove trailing low quality or N bases (below quality 3) (TRAILING:3)
Scan the read with a 4-base wide sliding window, cutting when the average quality per base drops below 15 (SLIDINGWINDOW:4:15)
Drop reads below the 36 bases long (MINLEN:36)

More at http://www.usadellab.org/cms/?page=trimmomatic

Address of the bookmark: http://www.usadellab.org/cms/?page=trimmomatic

segemehl

Anjana — Tue, 10 May 2016 08:10:15 -0500

segemehl is a software to map short sequencer reads to reference genomes. Unlike other methods, segemehl is able to detect not only mismatches but also insertions and deletions. Furthermore, segemehl is not limited to a specific read length and is able to map primer- or polyadenylation contaminated reads correctly. segemehl implements a matching strategy based on enhanced suffix arrays (ESA).

More at http://www.bioinf.uni-leipzig.de/Software/segemehl/

Manual http://www.bioinf.uni-leipzig.de/Software/segemehl/segemehl_manual_0_1_7.pdf

Address of the bookmark: http://hoffmann.bioinf.uni-leipzig.de/LIFE/segemehl.html

Platanus

Jit — Fri, 13 May 2016 05:12:40 -0500

Platanus is a novel de novo sequence assembler that can reconstruct genomic sequences of
highly heterozygous diploids from massively parallel shotgun sequencing data.

The latest version is 1.2.4.

To cite Platanus, please use the following:

Kajitani R, Toshimoto K, Noguchi H, Toyoda A, Ogura Y, Okuno M, Yabana M, Harada M, Nagayasu E, Maruyama H, Kohara Y, Fujiyama A, Hayashi T, Itoh T, “Efficient de novo assembly of highly heterozygous genomes from whole-genome shotgun short reads”. Genome Res. 2014 Aug;24(8):1384-95. doi: 10.1101/gr.170720.113. [abstract | full text]

Address of the bookmark: http://platanus.bio.titech.ac.jp/

MOSAIK: A Hash-Based Algorithm for Accurate Next-Generation Sequencing Short-Read Mapping

Neel — Fri, 20 May 2016 18:53:49 -0500

MOSAIK is a stable, sensitive and open-source program for mapping second and third-generation sequencing reads to a reference genome. Uniquely among current mapping tools, MOSAIK can align reads generated by all the major sequencing technologies, including Illumina, Applied Biosystems SOLiD, Roche 454, Ion Torrent and Pacific BioSciences SMRT. Indeed, MOSAIK was the only aligner to provide consistent mappings for all the generated data (sequencing technologies, low-coverage and exome) in the 1000 Genomes Project. To provide highly accurate alignments, MOSAIK employs a hash clustering strategy coupled with the Smith-Waterman algorithm. This method is well-suited to capture mismatches as well as short insertions and deletions. To support the growing interest in larger structural variant (SV) discovery, MOSAIK provides explicit support for handling known-sequence SVs, e.g. mobile element insertions (MEIs) as well as generating outputs tailored to aid in SV discovery.

Address of the bookmark: http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0090581

KisSplice

Jit — Tue, 16 Aug 2016 08:34:19 -0500

KisSplice is a software that enables to analyse RNA-seq data with or without a reference genome. It is an exact local transcriptome assembler that allows to identify SNPs, indels and alternative splicing events. It can deal with an arbitrary number of biological conditions, and will quantify each variant in each condition. It has been tested on Illumina datasets of up to 1G reads. Its memory consumption is around 5Gb for 100M reads.

KisSplice is not a full-length transcriptome assembler. This means that it will output the variable regions of the transcripts, not reconstruct them entirely.

KisSplice comes as a workflow, with several possible post-treatments meant to facilitate the analysis of the results. The choice of the post-treatment depends on the availability of a reference genome/transcriptome and on the need to perform a differential analysis, as summarised in the following table.

Address of the bookmark: http://kissplice.prabi.fr/

Samtools Primer !!

Jit — Thu, 23 Jun 2016 07:18:17 -0500

SAMtools: Primer / Tutorial by Ethan Cerami, Ph.D.

keywords: samtools, next-gen, next-generation, sequencing, bowtie, sam, bam, primer, tutorial, how-to, introduction
Revisions

    1.0: May 30, 2013: First public release on biobits.org.
    1.1: July 24, 2013: Updated with Disqus Comments / Feedback section.
    1.2: December 19, 2014: Multiple updates, including:
        Updated to use samtools 1.1 and bcftools 1.2.
        Updated usage for bcftools.

About

SAMtools is a popular open-source tool used in next-generation sequence analysis. This primer provides an introduction to SAMtools, and is geared towards those new to next-generation sequence analysis. The primer is also designed to be self-contained and hands-on, meaning that you only need to install SAMtools, and no other tools, and sample data sets are provided. Terms in bold are also explained in the glossary at the end of the document.

Address of the bookmark: http://biobits.org/samtools_primer.html