BOL: Related items

Alignment-free sequence comparison tools available for next-generation sequencing data analysis

Abhimanyu Singh — Tue, 07 Nov 2017 05:33:33 -0600

kallisto

Transcript abundance quantification from RNA-seq data (uses pseudoalignment for rapid determination of read compatibility with targets)

Software (C++)

https://pachterlab.github.io/kallisto/

Sailfish

Estimation of isoform abundances from reference sequences and RNA-seq data (k-mer based)

Software (C++)

http://www.cs.cmu.edu/~ckingsf/software/sailfish/

Salmon

Quantification of the expression of transcripts using RNA-seq data (uses k-mers)

https://combine-lab.github.io/salmon/

RNA-Skim

RNA-seq quantification at transcript-level (partitions the transcriptome into disjoint transcript clusters; uses sig-mers, a special type of k-mers)

Software (C++)

http://www.csbio.unc.edu/rs/

Variant calling

ChimeRScope

Fusion transcript prediction using gene k-mers profiles of the RNA-seq paired-end reads

Software (Java)

https://github.com/ChimeRScope/ChimeRScope/wiki

FastGT

Genotyping of known SNV/SNP variants directly from raw NGS sequence reads by counting unique k-mers

Software (C)

https://github.com/bioinfo-ut/GenomeTester4/

Phy-Mer

Reference-independent mitochondrial haplogroup classifier from NGS data (k-mer based)

Software (Python)

https://github.com/danielnavarrogomez/phy-mer

LAVA

Genotyping of known SNPs (dbSNP and Affymetrix's Genome-Wide Human SNP Array) from raw NGS reads (k-mer based)

Software (C)

http://lava.csail.mit.edu/

MICADo

Detection of mutations in targeted third-generation NGS data (can distinguish patients’ specific mutations; algorithm uses k-mers and is based on colored de Bruijn graphs)

Software (Python)

http://github.com/cbib/MICADo

General mapper

Minimap

Lightweight and fast read mapper and read overlap detector (uses the concept of “minimazers”, a special type of k-mers)

Software (C)

https://github.com/lh3/minimap

Assembly

De novo genome assembly

MHAP

Produces highly continuous assembly (fully resolved chromosome arms) from third-generation long and noisy reads (10 kbp) using a dimensionality reduction technique MinHash

Software (Java)

https://github.com/marbl/MHAP

Miniasm

Assembler of long noisy reads (SMRT, ONT) using the Overlap-Layout Consensus (OLC) approach without the necessity of an error correction stage (uses minimap)

Software (C)

https://github.com/lh3/miniasm

LINKS

Scaffolding genome assembly with error-containing long sequence (e.g., ONT or PacBio reads, draft genomes)

Software (Perl)

https://github.com/warrenlr/LINKS/

Read clustering

afcluster

Clustering of reads from different genes and different species based on k-mer counts

Software (C++)

https://github.com/luscinius/afcluster

QCluster

Clustering of reads with alignment-free measures (k-mer based) and quality values

Software (C++)

http://www.dei.unipd.it/~ciompin/main/qcluster.html

Reads error correction

Lighter

Correction of sequencing errors in raw, whole genome sequencing reads (k-mer based)

Software (C++)

https://github.com/mourisl/Lighter

QuorUM

Error corrector for Illumina reads using k-mers

Software (C++)

https://github.com/gmarcais/Quorum

Trowel

Software (C++)

https://sourceforge.net/projects/trowel-ec/

Metagenomics

Assembly-free phylogenomics

AAF

Phylogeny reconstruction directly from unassembled raw sequence data from whole genome sequencing projects; provides bootstrap support to assess uncertainty in the tree topology (k-mer based)

Software (Python)

https://github.com/fanhuan/AAF

kSNP v3

Reference-free SNP identification and estimation of phylogenetic trees using SNPs (based on k-mer analysis)

Software (C)

https://sourceforge.net/projects/ksnp/files/

NGS-MC

Phylogeny of species based on NGS reads using alignment-free sequence dissimilarity measures d2* and d2 S under different Markov chain models (using k-words)

R package

http://www-rcf.usc.edu/~fsun/Programs/NGS-MC/NGS-MC.html

Species identification/taxonomic profiling

CLARK

Taxonomic classification of metagenomic reads to known bacterial genomes using k-mer search and LCA assignment

Software (C++)

http://clark.cs.ucr.edu/

FOCUS

Reports organisms present in metagenomic samples and profiles their abundances (uses composition-based approach and non-negative least squares for prediction)

Web service Software (Python)

http://edwards.sdsu.edu/FOCUS/

GSM

Estimation of abundances of microbial genomes in metagenomic samples (k-mer based)

Software (Go)

https://github.com/pdtrang/GSM

Mash

Species identification using assembled or unassembled Illumina, PacBio, and ONT data (based on MinHash dimensionality-reduction technique)

Software (C++)

https://github.com/marbl/mash

Kraken

Taxonomic assignment in metagenome analysis by exact k-mer search; LCA assignment of short reads based on a comprehensive sequence database

Software (C++)

https://ccb.jhu.edu/software/kraken/

LMAT

Assignment of taxonomic labels to reads by k-mers searches in precomputed database

Software (C++/Python)

https://sourceforge.net/projects/lmat/

stringMLST

k-mer-based tool for MLST directly from the genome sequencing reads

Software (Python)

http://jordan.biology.gatech.edu/page/software/stringMLST

Taxonomer

k-mer-based ultrafast metagenomics tool for assigning taxonomy to sequencing reads from clinical and environmental samples

Web service

http://taxonomer.iobio.io/

Other

d2-tools

Word-based (k-tuple) comparison (pairwise dissimilarity matrix using d2S measure) of metatranscriptomic samples from NGS reads

Software (Python/R)

https://code.google.com/p/d2-tools/

VirHostMatcher

Prediction of hosts from metagenomic viral sequences based on ONF using various distance measures (e.g., d2)

Software (C++)

https://github.com/jessieren/VirHostMatcher

MetaFast

Statistics calculation of metagenome sequences and the distances between them based on assembly using de Bruijn graphs and Bray–Curtis dissimilarity measure

Software (Java)

https://github.com/ctlab/metafast

Ra assembler - a de novo DNA assembler for third generation sequencing data

biogeek — Wed, 27 Dec 2017 20:36:54 -0600

Integration of the Ra assembler - a de novo DNA assembler for third generation sequencing data developed on Faculty of Electrical Engineering and Computing (FER), Ruder Boskovic Institute (RBI) and Genome Institute of Singapore (GIS).

Ra is in development since 2014 in the form of several separate components that used to be run individually.
This project aims to ease the usage of Ra by integrating it into a complete de novo assembly tool.

Unlike other state-of-the-art assemblers, Ra does not have an error correction step. Instead, it relies on detecting overlaps using a very sensitive and specific overlapper ("graphmap -w owler", https://github.com/isovic/graphmap) and constructing and reducing an overlap graph (Ra layout, https://github.com/mariokostelac/ra).

Address of the bookmark: https://github.com/mariokostelac/ra-integrate/

MECAT: fast mapping, error correction, and de novo assembly for single-molecule sequencing reads

Rahul Nayak — Fri, 11 May 2018 05:07:45 -0500

MECAT is an ultra-fast Mapping, Error Correction and de novo Assembly Tools for single molecula sequencing (SMRT) reads. MECAT employs novel alignment and error correction algorithms that are much more efficient than the state of art of aligners and error correction tools. MECAT can be used for effectively de novo assemblying large genomes. For example, on a 32-thread computer with 2.0 GHz CPU , MECAT takes 9.5 days to assemble a human genome based on 54x SMRT data, which is 40 times faster than the current PBcR-Mhap pipeline. MECAT performance were compared with PBcR-Mhap pipeline, FALCON and Canu(v1.3) in five real datasets. The quality of assembled contigs produced by MECAT is the same or better than that of the PBcR-Mhap pipeline and FALCON.

https://www.nature.com/articles/nmeth.4432

Address of the bookmark: https://github.com/xiaochuanle/MECAT

Manta: rapid detection of structural variants and indels for germline and cancer sequencing applications.

Jit — Mon, 28 May 2018 09:41:39 -0500

Manta calls structural variants (SVs) and indels from mapped paired-end sequencing reads. It is optimized for analysis of germline variation in small sets of individuals and somatic variation in tumor/normal sample pairs. Manta discovers, assembles and scores large-scale SVs, medium-sized indels and large insertions within a single efficient workflow.

Address of the bookmark: https://github.com/Illumina/manta

SimLoRD: A read simulator for third generation sequencing reads

Aaryan Lokwani — Wed, 22 Aug 2018 10:40:27 -0500

SimLoRD is a read simulator for third generation sequencing reads and is currently focused on the Pacific Biosciences SMRT error model.

Reads are simulated from both strands of a provided or randomly generated reference sequence.

The reference can be read from a FASTA file or randomly generated with a given GC content. It can consist of several chromosomes, whose structure is respected when drawing reads. (Simulation of genome rearrangements may be incorporated at a later stage.)
The read lengths can be determined in four ways: drawing from a log-normal distribution (typical for genomic DNA), sampling from an existing FASTQ file (typical for RNA), sampling from a a text file with integers (RNA), or using a fixed length
Quality values and number of passes depend on fragment length.
Provided subread error probabilities are modified according to number of passes
Outputs reads in FASTQ format and alignments in SAM format

Address of the bookmark: https://bitbucket.org/genomeinformatics/simlord/

Qualimap2: Evaluating next generation sequencing alignment data

Jit — Tue, 11 Sep 2018 04:44:29 -0500

Qualimap 2 is a platform-independent application written in Java and R that provides both a Graphical User Inteface (GUI) and a command-line interface to facilitate the quality control of alignment sequencing data and its derivatives like feature counts.

Supported types of experiments include:

Whole-genome sequencing
Whole-exome sequencing
RNA-seq (speical mode available)
ChIP-seq

Address of the bookmark: http://qualimap.bioinfo.cipf.es/

sim3C: Read-pair simulation of 3C-based sequencing methodologies (HiC, Meta3C, DNase-HiC)

Jit — Tue, 13 Nov 2018 07:25:38 -0600

Required python modules

biopython
intervaltree
numpy
scipy
tqdm
PyYAML

Address of the bookmark: https://github.com/cerebis/sim3C

jackalope: A swift, versatile phylogenomic and high-throughput sequencing simulator

Abhimanyu Singh — Fri, 26 Jul 2019 00:58:12 -0500

jackalope simply and efficiently simulates (i) variants from reference genomes and (ii) reads from both Illumina and Pacific Biosciences (PacBio) platforms. It can either read reference genomes from FASTA files or simulate new ones. Genomic variants can be simulated using summary statistics, phylogenies, Variant Call Format (VCF) files, and coalescent simulations—the latter of which can include selection, recombination, and demographic fluctuations. jackalope can simulate single, paired-end, or mate-pair Illumina reads, as well as reads from Pacific Biosciences These simulations include sequencing errors, mapping qualities, multiplexing, and optical/PCR duplicates. All outputs can be written to standard file formats.

A swift, versatile phylogenomic and high-throughput sequencing simulator https://jackalope.lucasnell.com

Address of the bookmark: https://github.com/lucasnell/jackalope

iSeqQC: a tool for expression-based quality control in RNA sequencing

BioStar — Sun, 16 Feb 2020 08:47:17 -0600

iSeqQC, an expression-based QC tool that detects outliers either produced due to variable laboratory conditions or due to dissimilarity within a phenotypic group. iSeqQC implements various statistical approaches including unsupervised clustering, agglomerative hierarchical clustering and correlation coefficients to provide insight into outliers.

http://cancerwebpa.jefferson.edu/iSeqQC/

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-020-3399-8

Address of the bookmark: https://github.com/gkumar09/iSeqQC

Update Genome Workbench 2.7.15 released

Surabhi Chaudhary — Wed, 26 Feb 2014 16:12:17 -0600

NCBI Genome Workbench is an integrated application for viewing and analyzing sequence data. With Genome Workbench, you can view data in publically available sequence databases at NCBI, and mix this data with your own private data.

Genome Workbench can display sequence data in many ways, including graphical sequence views, various alignment views, phylogenetic tree views, and tabular views of data. It can also align your private data to data in public databases, display your data in the context of public data, and retrieve BLAST results.

Genome Workbench is built on the NCBI C++ ToolKit and uses cross-platform APIs for graphics. It runs on your local machine, and is available for Windows 2000/XP, Linux, MacOS X, and various flavors of Unix.

NCBI Genome Workbench is an integrated application for viewing and analyzing sequence data. Genome Workbench was developed entirely in-house at NCBI and makes use of the NCBI C++ ToolKit. The C++ ToolKit provides a convenient and flexible cross-platform API for managing system internals, database connections, network sockets, and the NCBI data model. In addition, the C++ ToolKit provides the Object Manager, which abstracts handling of sequences and sequence-related objects.

New Features in Genome Workbench 2.7.15

Multiple Alignment View: implemented adaptive feature display when zooming in
Active Objects Inspector replaces Selection Inspector. New View should offer an improved selection context examination. See Using Active Objects Inspector tutorial for more details.
Binary packages for Linux OpenSUSE 13.1 are now available

Bug Fixes and Improvements in Genome Workbench 2.7.15

Fixed major issue with OpenGL overlay/scrolling. Could cause crashes or view scrolling irregularities
Multiple Pane View: fixed crash on loading BLAST results
Graphical Sequence View: fixed crash on zooming in and out, related to SNP track
Graphical Sequence View: fixed Go To Position dialog to give better diagnostics in case of a user error
Graphical Sequence View: PDF export fixed rendering of Markers with commas in the name
Text View / Flat File: fixed Mac OS rendering issues
Text View / Flat File: performance optimization, extended capabilities of real-time rendering of molecules to tens of thousands
File Import: optimization improvement to speed up load of files containing multiple project items
File Import: remapping stage now shows accession.version and description of molecules, instead of plain GI numbers
Mac OS: improved tooltips for toolbar buttons
Phylogenetic Tree Builder Tool: improved diagnostics of errors
Multiple Alignment View: optimizations to avoid main GUI freezes
Open Dialog: removed duplicate elements in table of genomes (load Genome)
PDF export: fixed issue with XREF table errors
Tree View: fixed issues with showing Force Layout progress on Mac OS
Tree View: PDF export fixed issues for showing labels of collapsed nodes
Tree View: added an option to stop layout
Tree View: broadcasting mechanism fixed not to accumulate selected nodes

Reference:

NCBI news

http://www.ncbi.nlm.nih.gov/tools/gbench/