BOL: Related items

GenomeMapper: Simultaneous alignment of short reads against multiple genomes

Jit — Fri, 25 May 2018 09:29:44 -0500

GenomeMapper is a short read mapping tool designed for accurate read alignments. It quickly aligns millions of reads either with ungapped or gapped alignments. It can be used to align against multiple genomes simulanteously or against a single reference. If you are unsure which one is the appropriate GenomeMapper, you might want to use the latter https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2768987/

Address of the bookmark: http://1001genomes.org/software/genomemapper.html

Short-read assembly using Spades !

Abhimanyu Singh — Mon, 31 Jan 2022 07:18:16 -0600

If we only had Illumina reads, we could also assemble these using the tool Spades.

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

illumina_R1.fastq.gz: the Illumina forward reads
illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

-1 is input file of forward reads
-2 is input file of reverse reads
--careful minimizes mismatches and short indels
--cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
-o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads

Jit — Wed, 07 Jun 2017 04:18:16 -0500

GraphMap - A highly sensitive and accurate mapper for long, error-prone reads http://www.nature.com/ncomms/2016/160415/ncomms11307/full/ncomms11307.html

Features

    Mapping position agnostic to alignment parameters.
    Consistently very high sensitivity and precision across different error profiles, rates and sequencing technologies even with default parameters.
    Circular genome handling to resolve coverage drops near ends of the genome.
    E-value.
    Meaningful mapping quality.
    Various alignment strategies (semiglobal bit-vector and Gotoh, anchored).
    Overlapping of reads for de novo assembly.
    Transcriptome mapping through internal construction of a transcriptome from a given genomic reference and a GTF file.
    ...and much more.

GraphMap is also used as an overlapper in a new de novo genome assembly project called Ra (https://github.com/mariokostelac/ra-integrate).
Ra attempts to create de novo assemblies from raw nanopore and PacBio reads without requiring error correction, for which a highly sensitive overlapper is required.

Currently, development of a new spliced-alignment mode for mapping RNA-seq reads is under way.
Description of the current effort as well as how to reach the experimental implementation can be found here: doc/rnaseq.md.

Address of the bookmark: https://github.com/isovic/graphmap

LR_Gapcloser: a tiling path-based gap closer that uses long reads to complete genome assembly

Rahul Nayak — Thu, 14 May 2020 15:09:52 -0500

LR_Gapcloser is a gap closing tool using long reads from studied species. The long reads could be downloaed from public read archive database (for instance, NCBI SRA database ) or be your own data. Then they are fragmented and aligned to scaffolds using BWA mem algorithm in BWA package. In the package, we provided a compiled bwa, so the user needn't to install bwa. LR_Gapcloser uses the alignments to find the bridging that cross the gap, and then fills the long read original sequence into the genomic gaps.

Address of the bookmark: https://github.com/CAFS-bioinformatics/LR_Gapcloser

Evaluation of genome assembly software based on long reads

BioStar — Fri, 01 Feb 2019 11:55:54 -0600

TGS technologies have been used to produce highly accurate de novo assemblies of hundreds of microbial genomes and highly contiguous reconstructions of many dozens of plant and animal genomes, enabling new insights into evolution and sequence diversity. They have also been applied to resequencing analyses, to create detailed maps of structural variations in many species. Also, these new technologies have been used to fill in many of the gaps in the human reference genome.

In this report, we compare and evaluate several genome assembly software based on TSG technology. The experimentation has been performed on 4 reference genomes and the results evaluated with the QUAST software. The 11 software that have been evaluated are: Celera Assembler , Falcon , Miniasm, Newbler , SGA Assembler, Smartdenovo, Abruijn, Ra, DBG2OLC, Spades and Cerulean. The first 8 software use only long reads, while the 3 last software can merge long and short reads

HASLR: a tool for rapid genome assembly of long sequencing reads

LEGE — Fri, 31 Jan 2020 05:50:15 -0600

HASLR is a tool for rapid genome assembly of long sequencing reads. HASLR is a hybrid tool which means it requires long reads generated by Third Generation Sequencing technologies (such as PacBio or Oxford Nanopore) together with Next Generation Sequencing reads (such as Illumina) from the same sample.

Address of the bookmark: https://github.com/vpc-ccg/haslr

HISAT2: a fast and sensitive alignment program for mapping next-generation sequencing reads

Rahul Nayak — Tue, 08 May 2018 04:27:22 -0500

HISAT2 is a fast and sensitive alignment program for mapping next-generation sequencing reads (both DNA and RNA) to a population of human genomes (as well as to a single reference genome). Based on an extension of BWT for graphs [Sirén et al. 2014], we designed and implemented a graph FM index (GFM), an original approach and its first implementation to the best of our knowledge. In addition to using one global GFM index that represents a population of human genomes, HISAT2 uses a large set of small GFM indexes that collectively cover the whole genome (each index representing a genomic region of 56 Kbp, with 55,000 indexes needed to cover the human population). These small indexes (called local indexes), combined with several alignment strategies, enable rapid and accurate alignment of sequencing reads. This new indexing scheme is called a Hierarchical Graph FM index (HGFM).

more at https://ccb.jhu.edu/software/hisat2/index.shtml

Address of the bookmark: https://github.com/infphilo/hisat2

SViper: Swipe your Structural Variants called on long (ONT/PacBio) reads with short exact (Illumina) reads.

Neel — Sun, 22 Dec 2019 03:48:28 -0600

Call sviper

~$ ./sviper -s short-reads.bam -l long-reads.bam -r ref.fa -c variants.vcf -o polished_variants

This will output a polished_variants.vcf file, that contains all the refined variants.

Sometimes it is helpful to look at the polished sequence, e.g. with the IGV browser. In that case you want SViper to output the polished and aligned sequences in a bam file via the option --output-polished-bam:

~$ ./sviper -s short-reads.bam -l long-reads.bam -r ref.fa -c variants.vcf -o polished_variants --output-polished-bam

Address of the bookmark: https://github.com/smehringer/SViper

Pacbio Long Reads Compatible Software and Tools

Archana Malhotra — Wed, 15 Mar 2017 14:19:01 -0500

The following software packages are known to be compatible with PacBio® data, in addition to PacBio's own SMRT® Analysis suite. All packages are believed to be open source or freely available for non-commercial use. See the individual project sites for up-to-date license information. A separate page lists commercial software.

Know of any other open source software for PacBio data? Email us.

Software categories:

Address of the bookmark: https://github.com/PacificBiosciences/DevNet/wiki/Compatible-Software

TAREAN: A computational tool for identification and characterization of satellite DNA from unassembled short reads

Surabhi Chaudhary — Tue, 15 May 2018 02:53:11 -0500

TAndem REpeat ANalyzer -TAREAN – is a computational pipeline for unsupervised identification of satellite repeats from unassembled sequence reads. The pipeline uses low-pass whole genome sequence reads and performs their graph-based clustering. Resulting clusters, representing all types of repeats, are then examined for the presence of circular structures and putative satellite repeats are reported.

How to use TAREAN:

Install a local instance of the pipeline using its source code available from bitbucket repository.
Use public Galaxy-based server at https://repeatexplorer-elixir.cerit-sc.cz/. The server is provided in frame of the Elixir CZ project and is maintained by CESNET and CERIT-SC. Simple registration is required to use this service.

Development of TAREAN was supported by ELIXIR CZ research infrastructure project (MEYS Grant No: LM2015047).

References

Novak, P., Avila Robledillo, L., Koblizkova, A., Vrbova, I., Neumann, P., Macas, J. (2017) – TAREAN: a computational tool for identification and characterization of satellite DNA from unassembled short reads. Nucleic Acids Res., doi:10.1093/nar/gkx257

Address of the bookmark: https://bitbucket.org/petrnovak/repex_tarean