With advances in Cancer Genomics, Mutation Annotation Format (MAF) is being widley accepted and used to store variants detected. The Cancer Genome Atlas Project has seqenced over 30 different cancers with sample size of each cancer type being over 200. The resulting data consisting of genetic variants is stored in the form of Mutation Annotation Format. This package attempts to summarize, analyze, annotate and visualize MAF files in an efficient manner either from TCGA sources or any in-house studies as long as the data is in MAF format. Maftools can also handle ICGC Simple Somatic Mutation format.

maftools is on bioRxiv

Please cite the below if you find this tool useful for you.

Mayakonda, A. and H.P. Koeffler, Maftools: Efficient analysis, visualization and summarization of MAF files from large-scale cohort based cancer studies. bioRxiv, 2016. doi: http://dx.doi.org/10.1101/052662

Address of the bookmark: https://github.com/PoisonAlien/maftools

BBSplit is a tool that bins reads by mapping to multiple references simultaneously, using BBMap. The reads go to the bin of the reference they map to best. There are also disambiguation options, such that reads that map to multiple references can be binned with all of them, none of them, one of them, or put in a special "ambiguous" file for each of them. Paired reads will always be kept together.

For example, if you had a library of something that was contaminated with e.coli and salmonella, you could do this:

bbsplit.sh in=reads.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu=clean.fq int=t

This will produce 3 output files:
out_ecoli.fq (ecoli reads)
out_salmonella.fq (salmonella reads)
clean.fq (unmapped reads)

In this case, "int=t" means that the input file is paired and interleaved. For single-end reads you would leave that out. For paired reads in 2 files, you would do this:
bbsplit.sh in1=reads1.fq in2=reads2.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu1=clean1.fq outu2=clean2.fq

BBSplit is available here:
https://sourceforge.net/projects/bbmap/

The sensitivity can be raised to be equivalent to BBMap with these flags: "minratio=0.56 minhits=1 maxindel=16000"

With the popularity of next-generation sequencing (NGS) technologies, many NGS read simulators have been developed. Currently, many of the popular short read simulators are designed to simulate reads mimicking many Illumina, 454 and SOLiD platforms. Listed below are some popular short read simulators. Links to their publications are provided as well.

1. MetaSim
2. wgsim
3. SimNGS
4. ArtificialFastqGenerator
5. InSilicoSeq

Long Read Simulators

With the advancements in sequencing technologies, scientists have shown an increasing interest in using third-generation sequencing (TGS) technologies. Currently, many of the popular long read simulators are designed to simulate reads mimicking the two main TGS technologies; (1) Pacific Biosciences (PacBio) and (2) Oxford Nanopore (ONT). Listed below are some of the popular and recently introduced PacBio and ONT simulators. Links to their publications are provided as well.

PacBio Simulators

1. PBSIM
2. LongISLND
3. SimLoRD
4. NPBSS
5. PaSS

ONT Simulators

1. NanoSim
2. Nanopore SimulatION
3. DeepSimulator
4. DeepSimulator1.5

• outperforms PacBioToCA/LSC in terms of accuracy and contiguity/sensitivity (http://dx.doi.org/10.1093/bioinformatics/btu392)
• is easy to install/run/configure
• supports various types of dat
  • HiSeq/MiSeq (100-500bp)
  • Unitigs
  • 454, ...

proovread maps high coverage data to pacbio reads (bwa mem, blasr, daligner) in multiple iterations.

Address of the bookmark: https://github.com/BioInf-Wuerzburg/proovread

Address of the bookmark: https://github.com/vishakad/chipulate

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

Find the detail of the reads repeats:

fq2fa ONT_A.fastq ONT_A.fasta 

minimap2 -xava-ont ONT_A.fasta ONT_A.fasta -t10 -X > AONT.paf 

awk '{if($1==$6){print}}' AONT.paf > AONTself.paf 

awk '$5=="-"' AONTself.paf | awk '{print $1}'| sort|uniq > invertedrepeat.list

Generated a few palindrome and repeats plots (highlighting only repeats largest than 10, 20 and 30 kb)

minidot -f 5 -m 30000 AONTself.paf > AONTself30000.eps 
sed 's/_template_pass_FAH31515//' AONTself30000.eps > AONTself30000final.eps 

minidot -f 5 -m 20000 AONTself.paf > AONTself20000.eps 
sed 's/_template_pass_FAH31515//' AONTself20000.eps > AONTself20000final.eps 

minidot -f 5 -m 10000 AONTself.paf > AONTself10000.eps 
sed 's/_template_pass_FAH31515//' AONTself10000.eps > AONTself10000final.eps 

Assemble with miniasm:

miniasm -f ONT_A.fasta AONT.paf > AONT.gfa 

grep '^S' AONT.gfa |awk '{print ">"$2"\n"$3}' > AONT_miniasm.fasta 

minimap2 -xasm10 AONT_miniasm.fasta AONT_miniasm.fasta -t1 -X > AONT_miniasm.paf 

awk '{if($1==$6){print}}' AONT_miniasm.paf > AONT_miniasm_self.paf 

minidot -f 5 -m 10000 AONT_miniasm_self.paf > AONT_miniasm_self10000.eps 

Njoy the assembly !

bwa aln hs37m.fa r1.fq > r1.sai && bwa aln hs37m.fa r2.fq > r2.sai \
&& bwa sampe hs37m r1.sai r2.sai r1.fq r2.fq > r12.bwa.sam

bwa bwasw ../index/bwa/hs37m.fa r12.fq > r12.bwasw.sam

gsnap -A sam -d hs37m r1.fq r2.fq > r12.gsnap.sam

novoalign -r Random -o SAM -f r1.fq r2.fq -i 500 50 -d hs37m-k14s3.novo > r12.novo.sam

smalt map -f samsoft -i 650 -o r12.smalt-k20s13.sam hs37m-k20s13 r1.fq r2.fq

stampy.py -g hs37m -h hs37m -o r12.stampy.sam -M r1.fq,r2.fq

soap -D hs37m.fa.index -a r1.fq -b r2.fq -l 32 -g 3 -u dummy -2 dummy -o r12.soap