BOL: Related items

INC-Seq: accurate single molecule reads using nanopore sequencing

Jit — Mon, 27 Nov 2017 10:38:56 -0600

INC-Seq reads enabled accurate species-level classification, identification of species at 0.1 % abundance and robust quantification of relative abundances, providing a cheap and effective approach for pathogen detection and microbiome profiling on the MinION system.

Address of the bookmark: https://github.com/CSB5/INC-Seq

TAREAN: A computational tool for identification and characterization of satellite DNA from unassembled short reads

Surabhi Chaudhary — Tue, 15 May 2018 02:53:11 -0500

TAndem REpeat ANalyzer -TAREAN – is a computational pipeline for unsupervised identification of satellite repeats from unassembled sequence reads. The pipeline uses low-pass whole genome sequence reads and performs their graph-based clustering. Resulting clusters, representing all types of repeats, are then examined for the presence of circular structures and putative satellite repeats are reported.

How to use TAREAN:

Install a local instance of the pipeline using its source code available from bitbucket repository.
Use public Galaxy-based server at https://repeatexplorer-elixir.cerit-sc.cz/. The server is provided in frame of the Elixir CZ project and is maintained by CESNET and CERIT-SC. Simple registration is required to use this service.

Development of TAREAN was supported by ELIXIR CZ research infrastructure project (MEYS Grant No: LM2015047).

References

Novak, P., Avila Robledillo, L., Koblizkova, A., Vrbova, I., Neumann, P., Macas, J. (2017) – TAREAN: a computational tool for identification and characterization of satellite DNA from unassembled short reads. Nucleic Acids Res., doi:10.1093/nar/gkx257

Address of the bookmark: https://bitbucket.org/petrnovak/repex_tarean

BlasR Mapping single molecule sequencing reads using Basic Local Alignment with Successive Refinement (BLASR): Theory and Application,

Jit — Wed, 23 May 2018 06:54:32 -0500

BLASR (Basic Local Alignment with Successive Refinement) for mapping Single Molecule Sequencing (SMS) reads that are thousands to tens of thousands of bases long with divergence between the read and genome dominated by insertion and deletion error.

Here is how I use the blasr to align PacBio reads to the contigs (target.fasta). The “target.fasta.sa” is the suffix array from “target.fasta” generated by sawriter.

blasr query.fa ./target.fasta -sa ./target.fasta.sa -bestn 40 -maxScore -500 -m 4 -nproc 24 -out target.m4 -maxLCPLength 15

the output format option “-m 4″ generate the alignment coordinate. Not fully documented, but I can explain that to you.

I use a 24 cores / 48G ram server for the alignment. It took about 2 to 3 hours aligning 3G PacBio Reads to 10^6 sequences of short read contigs with a mean 3.5kbp length.

Address of the bookmark: http://bix.ucsd.edu/projects/blasr/

P_RNA_scaffolder: a fast and accurate genome scaffolder using paired-end RNA-sequencing reads

BioStar — Fri, 07 Sep 2018 05:19:06 -0500

P_RNA_scaffolder is a novel scaffolding tool using Pair-end RNA-seq to scaffold genome fragments. The method is suitable for most genomes. The program could utilize Illumina Paired-end RNA-sequencing reads from target speciesies. Our method provides another practical alternative to existing mate-pair_based approaches or other Protein-based approaches (for instance, PEP_scaffolder ) for scaffolding genome sequences. The most important feature of this method is to improve the completeness of gene regions and long-coding gene regions (for instance, circRNA).

Address of the bookmark: http://www.fishbrowser.org/software/P_RNA_scaffolder/#

FastGT: an alignment-free method for calling common SNVs directly from raw sequencing reads

Jit — Tue, 28 Jan 2020 03:27:33 -0600

FastGT is a program package for whole-genome genotyping of genome variants directly from raw sequencing reads. It is written in C and runs in Linux. FastGT uses a list of variant-specific k-mer pairs that are unique in human genome, counts the frequency of k-mers in sequencing data and predicts the genotype. All this takes less than 1 hour on average low-cost Linux server.

http://bioinfo.ut.ee/FastGT/

https://github.com/bioinfo-ut/GenomeTester4/

Address of the bookmark: http://bioinfo.ut.ee/FastGT/

mixtureS: a novel tool for bacterial strain reconstruction from reads

BioStar — Fri, 21 Aug 2020 08:23:19 -0500

mixtureS that can de novo identify bacterial strains from shotgun reads of a clonal or metagenomic sample, without prior knowledge about the strains and their variations. Tested on 243 simulated datasets and 195 experimental datasets, mixtureS reliably identified the strains, their numbers and their abundance. Compared with three tools, mixtureS showed better performance in almost all simulated datasets and the vast majority of experimental datasets.

Availability

The source code and tool mixtureS is available at http://www.cs.ucf.edu/˜xiaoman/mixtureS/.

Address of the bookmark: http://www.cs.ucf.edu/~xiaoman/mixtureS/

cutadapt

Radha Agarkar — Fri, 13 May 2016 04:54:50 -0500

Cutadapt finds and removes adapter sequences, primers, poly-A tails and other types of unwanted sequence from your high-throughput sequencing reads.

Cleaning your data in this way is often required: Reads from small-RNA sequencing contain the 3’ sequencing adapter because the read is longer than the molecule that is sequenced. Amplicon reads start with a primer sequence. Poly-A tails are useful for pulling out RNA from your sample, but often you don’t want them to be in your reads.

Cutadapt helps with these trimming tasks by finding the adapter or primer sequences in an error-tolerant way. It can also modify and filter reads in various ways. Adapter sequences can contain IUPAC wildcard characters. Also, paired-end reads and even colorspace data is supported. If you want, you can also just demultiplex your input data, without removing adapter sequences at all.

Cutadapt comes with an extensive suite of automated tests and is available under the terms of the MIT license.

If you use cutadapt, please cite DOI:10.14806/ej.17.1.200 .

Address of the bookmark: https://cutadapt.readthedocs.io/en/stable/installation.html#quickstart

proovread : large-scale high-accuracy PacBio correction through iterative short read consensus

Jit — Fri, 05 Jan 2018 04:12:20 -0600

proovread : large-scale high-accuracy PacBio correction through iterative short read consensus

outperforms PacBioToCA/LSC in terms of accuracy and contiguity/sensitivity (http://dx.doi.org/10.1093/bioinformatics/btu392)
is easy to install/run/configure
supports various types of dat
- HiSeq/MiSeq (100-500bp)
- Unitigs
- 454, ...

proovread maps high coverage data to pacbio reads (bwa mem, blasr, daligner) in multiple iterations.

Address of the bookmark: https://github.com/BioInf-Wuerzburg/proovread

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

nanofilt: Filtering and trimming of long read sequencing data

Jit — Mon, 30 Jul 2018 12:01:52 -0500

Filtering on quality and/or read length, and optional trimming after passing filters.
Reads from stdin, writes to stdout.

Intended to be used:

directly after fastq extraction
prior to mapping
in a stream between extraction and mapping

https://github.com/wdecoster/nanofilt

Address of the bookmark: https://github.com/wdecoster/nanofilt