BOL: Related items

Run miniasm assembler on nanopore reads !

Jit — Mon, 18 Dec 2017 04:07:50 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

Find the detail of the reads repeats:

fq2fa ONT_A.fastq ONT_A.fasta

minimap2 -xava-ont ONT_A.fasta ONT_A.fasta -t10 -X > AONT.paf

awk '{if($1==$6){print}}' AONT.paf > AONTself.paf

awk '$5=="-"' AONTself.paf | awk '{print $1}'| sort|uniq > invertedrepeat.list

Generated a few palindrome and repeats plots (highlighting only repeats largest than 10, 20 and 30 kb)

minidot -f 5 -m 30000 AONTself.paf > AONTself30000.eps
sed 's/_template_pass_FAH31515//' AONTself30000.eps > AONTself30000final.eps

minidot -f 5 -m 20000 AONTself.paf > AONTself20000.eps
sed 's/_template_pass_FAH31515//' AONTself20000.eps > AONTself20000final.eps

minidot -f 5 -m 10000 AONTself.paf > AONTself10000.eps
sed 's/_template_pass_FAH31515//' AONTself10000.eps > AONTself10000final.eps

Assemble with miniasm:

miniasm -f ONT_A.fasta AONT.paf > AONT.gfa
grep '^S' AONT.gfa |awk '{print ">"$2"\n"$3}' > AONT_miniasm.fasta

minimap2 -xasm10 AONT_miniasm.fasta AONT_miniasm.fasta -t1 -X > AONT_miniasm.paf

awk '{if($1==$6){print}}' AONT_miniasm.paf > AONT_miniasm_self.paf

minidot -f 5 -m 10000 AONT_miniasm_self.paf > AONT_miniasm_self10000.eps

Njoy the assembly !

TAREAN: A computational tool for identification and characterization of satellite DNA from unassembled short reads

Surabhi Chaudhary — Tue, 15 May 2018 02:53:11 -0500

TAndem REpeat ANalyzer -TAREAN – is a computational pipeline for unsupervised identification of satellite repeats from unassembled sequence reads. The pipeline uses low-pass whole genome sequence reads and performs their graph-based clustering. Resulting clusters, representing all types of repeats, are then examined for the presence of circular structures and putative satellite repeats are reported.

How to use TAREAN:

Install a local instance of the pipeline using its source code available from bitbucket repository.
Use public Galaxy-based server at https://repeatexplorer-elixir.cerit-sc.cz/. The server is provided in frame of the Elixir CZ project and is maintained by CESNET and CERIT-SC. Simple registration is required to use this service.

Development of TAREAN was supported by ELIXIR CZ research infrastructure project (MEYS Grant No: LM2015047).

References

Novak, P., Avila Robledillo, L., Koblizkova, A., Vrbova, I., Neumann, P., Macas, J. (2017) – TAREAN: a computational tool for identification and characterization of satellite DNA from unassembled short reads. Nucleic Acids Res., doi:10.1093/nar/gkx257

Address of the bookmark: https://bitbucket.org/petrnovak/repex_tarean

Porechop: tool for finding and removing adapters from Oxford Nanopore reads

Rahul Nayak — Tue, 29 May 2018 07:33:44 -0500

Porechop is a tool for finding and removing adapters from Oxford Nanopore reads. Adapters on the ends of reads are trimmed off, and when a read has an adapter in its middle, it is treated as chimeric and chopped into separate reads. Porechop performs thorough alignments to effectively find adapters, even at low sequence identity.

Porechop also supports demultiplexing of Nanopore reads that were barcoded with the Native Barcoding Kit, PCR Barcoding Kit or Rapid Barcoding Kit.

Address of the bookmark: https://github.com/rrwick/Porechop

ReMILO: reference assisted misassembly detection algorithm using short and long reads.

Jit — Fri, 06 Jul 2018 04:27:49 -0500

ReMILO, a reference assisted misassembly detection algorithm that uses both short reads and PacBio SMRT long reads. ReMILO aligns the initial short reads to both the contigs and reference genome, and then constructs a novel data structure called red-black multipositional de Bruijn graph to detect misassemblies. In addition, ReMILO also aligns the contigs to long reads and find their differences from the long reads to detect more misassemblies.

Address of the bookmark: https://github.com/songc001/remilo

Rebaler: program for conducting reference-based assemblies using long reads.

Jit — Tue, 18 Sep 2018 07:52:41 -0500

Rebaler is a program for conducting reference-based assemblies using long reads. It relies mainly on minimap2 for alignment and Racon for making consensus sequences.

I made Rebaler for bacterial genomes (specifically for the task of testing basecallers). It should in principle work for non-bacterial genomes as well, but I haven't tested it.

Address of the bookmark: https://github.com/rrwick/Rebaler

Wtdbg2: a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore

Neel — Fri, 19 Oct 2018 08:48:43 -0500

Wtdbg2 is a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore Technologies (ONT). It assembles raw reads without error correction and then builds the consensus from intermediate assembly output. Wtdbg2 is able to assemble the human and even the 32Gb Axolotl genome at a speed tens of times faster than CANU and FALCONwhile producing contigs of comparable base accuracy.

Address of the bookmark: https://github.com/ruanjue/wtdbg2

SViper: Swipe your Structural Variants called on long (ONT/PacBio) reads with short exact (Illumina) reads.

Neel — Sun, 22 Dec 2019 03:48:28 -0600

Call sviper

~$ ./sviper -s short-reads.bam -l long-reads.bam -r ref.fa -c variants.vcf -o polished_variants

This will output a polished_variants.vcf file, that contains all the refined variants.

Sometimes it is helpful to look at the polished sequence, e.g. with the IGV browser. In that case you want SViper to output the polished and aligned sequences in a bam file via the option --output-polished-bam:

~$ ./sviper -s short-reads.bam -l long-reads.bam -r ref.fa -c variants.vcf -o polished_variants --output-polished-bam

Address of the bookmark: https://github.com/smehringer/SViper

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Jit — Mon, 10 Feb 2020 02:45:53 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Address of the bookmark: https://github.com/rrwick/Deepbinner

SqueezeMeta: a fully automated metagenomics pipeline, from reads to bins

BioStar — Mon, 17 Aug 2020 05:25:10 -0500

SqueezeMeta is a full automatic pipeline for metagenomics/metatranscriptomics, covering all steps of the analysis. SqueezeMeta includes multi-metagenome support allowing the co-assembly of related metagenomes and the retrieval of individual genomes via binning procedures. Thus, SqueezeMeta features several unique characteristics:

Co-assembly procedure with read mapping for estimation of the abundances of genes in each metagenome
Co-assembly of a large number of metagenomes via merging of individual metagenomes
Includes binning and bin checking, for retrieving individual genomes
The results are stored in a database, where they can be easily exported and shared, and can be inspected anywhere using a web interface.
Internal checks for the assembly and binning steps inform about the consistency of contigs and bins, allowing to spot potential chimeras.
Metatranscriptomic support via mapping of cDNA reads against reference metagenomes

Address of the bookmark: https://github.com/jtamames/SqueezeMeta

Bioinformatics tools for telomere to telomere assembly !

BioStar — Tue, 17 Aug 2021 13:17:09 -0500

● Merfin – k-mer-based assembly and variant calling evaluation for improved consensus accuracy (Arang Rhie)
● PanGenie – algorithm that leverages a pangenome reference built from haplotype-resolved genome assemblies in conjunction with k-mer count information from raw, short-read sequencing data to genotype a wide spectrum of genetic variation (Tobias Marschall)
● SQANTI3 – an automated pipeline for the classification of long-read transcripts that can assess the quality of data and the preprocessing pipeline (Rocío Amorín de Hegedüs @rocioadh)
● tama (Transcriptome Annotation by Modular Algorithms) – software designed for processing Iso-Seq data and other long-read transcriptome data (Richard Kuo @GenomeRIK)
● pbaa (PacBio Amplicon Analysis) – separates complex mixtures of amplicon targets from genomic samples to cluster and generate high-quality consensus sequences from HiFi reads (Zev Kronenberg @zevkronenberg)
● bellerophon – analyzes MHC typing and other low-complexity gene amplicon data; performs allele calling while detecting polymorphic sites within the sequences and removing potential chimeric sequence variants (Yuanyuan Cheng @Yuanyuan929)
● svpack – tools for filtering, comparing, and annotating structural variant (SV) calls in VCF format (Aaron Wenger)
● JumboDB – tool for de Bruijn graph construction (Anton Bankevich @AntonBankevich)
● uLTRA – tool for splice alignment of long transcriptomic reads to a genome, guided by a database of exon annotations. (Kristoffer Sahlin @krsahlin)
● LeafGo – workflow to rapidly produce high-quality de novo plant genomes (Luca Ermini @ermini_luca)

Reference:

https://www.pacb.com/blog/young-investigators-share-stellar-science-career-advice-and-bioinformatics-tools-at-smrt-leiden-2021/