BOL: Related items

NextDenovo: string graph-based de novo assembler for TGS long reads

Jit — Sun, 05 Jan 2020 04:08:29 -0600

NextDenovo is a string graph-based de novo assembler for TGS long reads. It uses a "correct-then-assemble" strategy similar to canu, but requires significantly less computing resources and storages. After assembly, the per-base error rate is about 97-98%, to further improve single base accuracy, please use NextPolish.

NextDenovo contains two core modules: NextCorrect and NextGraph. NextCorrect can be used to correct TGS long reads with approximately 15% sequencing errors, and NextGraph can be used to construct a string graph with corrected reads. It also contains a modified version of minimap2 for adapting input and output and producing more sensitive and accurate dovetail overlaps, and some useful utilities (see here for more details).

Address of the bookmark: https://github.com/Nextomics/NextDenovo

mixtureS: a novel tool for bacterial strain reconstruction from reads

BioStar — Fri, 21 Aug 2020 08:23:19 -0500

mixtureS that can de novo identify bacterial strains from shotgun reads of a clonal or metagenomic sample, without prior knowledge about the strains and their variations. Tested on 243 simulated datasets and 195 experimental datasets, mixtureS reliably identified the strains, their numbers and their abundance. Compared with three tools, mixtureS showed better performance in almost all simulated datasets and the vast majority of experimental datasets.

Availability

The source code and tool mixtureS is available at http://www.cs.ucf.edu/˜xiaoman/mixtureS/.

Address of the bookmark: http://www.cs.ucf.edu/~xiaoman/mixtureS/

HairSplitter: assembling long reads in an unknown number of haplotypes

BioStar — Wed, 07 Dec 2022 00:13:40 -0600

Pros and cons of HairSplitter Limitations of HairSplitter:

Not very fast: it re-polishes the whole assembly

Limited in the number of haplotypes

Strengths of HairSplitter:

Very modular, can be used with any assembler

Naive: makes no assumption on ploidy, parameter-free

Safe: won’t artificially duplicate contigs

HairSplitter splits collapsed assemblies from “draft” assemblies obtained by any means

HairSplitter can recover haplotypes and distinguish repeated elements

Only needs sequencing reads, potentially error-prone

HairSplitter splits collapsed assemblies from “draft” assemblies obtained by any means

HairSplitter can recover haplotypes and distinguish repeated elements

Only needs sequencing reads, potentially error-prone

Not really available yet (github.com/RolandFaure/HairSplitter)

https://hal.archives-ouvertes.fr/hal-03864075/file/RolandFaure_presentation_SeqBIM_2022.pdf

Address of the bookmark: https://hal.archives-ouvertes.fr/hal-03817928/document

RACA: Reference-Assisted Chromosome Assembly

Priya Singh — Wed, 06 Apr 2016 09:29:50 -0500

Rreference-Assisted Chromosome Assembly (RACA), an algorithm to reliably order and orient sequence scaffolds generated by NGS and assemblers into longer chromosomal fragments using comparative genome information and paired-end reads.

http://www.ncbi.nlm.nih.gov/pubmed/23307812

http://bioen-compbio.bioen.illinois.edu/RACA/

Address of the bookmark: http://bioen-compbio.bioen.illinois.edu/RACA/

mrFAST: Micro Read Fast Alignment Search Tool

Neel — Tue, 26 Apr 2016 03:50:06 -0500

mrFAST is a read mapper that is designed to map short reads to reference genome with a special emphasis on the discovery of structural variation and segmental duplications. mrFAST maps short reads with respect to user defined error threshold, including indels up to 4+4 bp. This manual, describes how to choose the parameters and tune mrFAST with respect to the library settings. mrFAST is designed to find 'all' mappings for a given set of reads, however it can return one "best" map location if the relevant parameter is invoked.

More at http://mrfast.sourceforge.net/manual.html

Address of the bookmark: http://mrfast.sourceforge.net/manual.html

YAHA

Jit — Fri, 20 Jan 2017 05:38:05 -0600

YAHA, a fast and flexible hash-based aligner. YAHA is as fast and accurate as BWA-SW at finding the single best alignment per query and is dramatically faster and more sensitive than both SSAHA2 and MegaBLAST at finding all possible alignments. Unlike other aligners that report all, or one, alignment per query, or that use simple heuristics to select alignments, YAHA uses a directed acyclic graph to find the optimal set of alignments that cover a query using a biologically relevant breakpoint penalty. YAHA can also report multiple mappings per defined segment of the query. We show that YAHA detects more breakpoints in less time than BWA-SW across all SV classes, and especially excels at complex SVs comprising multiple breakpoints.

Availability: YAHA is currently supported on 64-bit Linux systems. Binaries and sample data are freely available for download from http://faculty.virginia.edu/irahall/YAHA.

Contact:

http://genome.wustl.edu/people/groups/detail/hall-lab/

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3463118/

QuorUM: An Error Corrector for Illumina Reads

Jit — Wed, 08 Nov 2017 11:40:41 -0600

Illumina Sequencing data can provide high coverage of a genome by relatively short (most often 100 bp to 150 bp) reads at a low cost. Even with low (advertised 1%) error rate, 100 × coverage Illumina data on average has an error in some read at every base in the genome. These errors make handling the data more complicated because they result in a large number of low-count erroneous k-mers in the reads. However, there is enough information in the reads to correct most of the sequencing errors, thus making subsequent use of the data (e.g. for mapping or assembly) easier. Here we use the term “error correction” to denote the reduction in errors due to both changes in individual bases and trimming of unusable sequence. We developed an error correction software called QuorUM. QuorUM is mainly aimed at error correcting Illumina reads for subsequent assembly. It is designed around the novel idea of minimizing the number of distinct erroneous k-mers in the output reads and preserving the most true k-mers, and we introduce a composite statistic π that measures how successful we are at achieving this dual goal. We evaluate the performance of QuorUM by correcting actual Illumina reads from genomes for which a reference assembly is available.

QuorUM is distributed as an independent software package and as a module of the MaSuRCA assembly software. Both are available under the GPL open source license at http://www.genome.umd.edu.

Address of the bookmark: http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0130821

NxRepair: error correction in de novo assemblies using Nextera Mate Pair Reads

BioStar — Thu, 24 Jan 2019 10:35:12 -0600

NxRepair is a python module that automatically detects large structural errors in de novo assemblies using Nextera mate pair reads. The decector will break a contig at the site of an identified misassembly and will generate a new fasta file containing both the corrected contigs and the correct, unaffected contigs.

https://nxrepair.readthedocs.io/en/latest/tutorial.html

nxrepair aligned_matepairs.bam assemblyfasta.fasta error_locations.csv new_fasta.fasta

Address of the bookmark: https://github.com/rebeccaroisin/nxrepair

Common steps for reads mapping !

BioStar — Thu, 09 Mar 2023 02:48:02 -0600

Mapping reads to a reference genome is an essential step in many types of genomic analysis, such as variant calling and gene expression analysis. Here are some general steps to follow for mapping reads to a genome:

Choose a read mapper: There are many read mappers available, such as BWA, Bowtie, and HISAT2. Choose a mapper that is appropriate for your type of data and research question.
Index the reference genome: Before mapping reads, the reference genome needs to be indexed. This involves creating an index of the genome sequence that allows the mapper to quickly find matches to the reads. Most mappers have their own indexing tools.
Prepare the read data: The reads should be in a format that is compatible with the mapper. Most mappers accept FASTQ or BAM files. Depending on the quality of the data, it may need to be filtered or trimmed before mapping.
Run the mapper: The mapper is run with the command-line interface or using a graphical user interface. The specific command depends on the mapper being used, but typically involves specifying the input data, reference genome, and output file format.
Evaluate the mapping results: After the mapping is complete, the results should be evaluated. This includes assessing the quality of the mapping, such as the mapping rate, the number of mapped reads, and the mapping quality score.
Post-processing: Depending on the analysis being performed, post-processing of the mapped reads may be necessary. This can include filtering reads based on quality, removing duplicate reads, and calling variants.

Overall, mapping reads to a reference genome is a complex process that requires careful consideration of the type of data, the research question, and the specific mapper being used.

Rolf Backofen Lab

Thu, 18 Jul 2013 13:51:23 -0500

The research interest of this group include constraint programming, structure prediction in simplified protein models, investigation of protein energy landscapes, detection of RNA sequence/structure motifs, prediction and evaluation of alternative splice forms, description and detection of regulatory sequences.

Link @ http://www.bioinf.uni-freiburg.de/